ASDHS-MLC64G-CT - ADLINK Technology

ASDHS-MLC C2 Series

Half-Slim (JEDEC MO-297)

SATA 6 Gb/s Solid State Drive

Specification

Manual Rev.: 1.00

Revision Date: June 4, 2012

Part Number: 50-1Z129-1000

Advance Technologies; Automate the World.

Document History

Revision Date Changes

1.00 2012/06/04 Initial Release

2 Specification

Disclaimer

The information in this document is subject to change without prior notice in order to improve

reliability, design, and function and does not represent a commitment on the part of the

manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental,

or consequential damages arising out of the use or inability to use the product or documentation,

even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright.

All rights are reserved. No part of this datasheet may be reproduced by any mechanical, electronic,

or other means in any form without prior written permission of ADLINK Technology, Inc.

Specification 3

Table of Contents

1 Introduction .........................................................................5

1.1 Overview................................................................................................. 5

1.2 Product Specification................................................................................... 5

1.3 Functional Block Diagram............................................................................10

1.4 Product Images........................................................................................10

1.5 Mechanical Drawing: Compatible with JEDEC MO-297 ( w/o case ) ...........................11

1.6 Architecture ............................................................................................12

1.7 Hot Plug Support ......................................................................................12

2 Pin Locations and Signal Descriptions .................................13

2.1 Pin Locations...........................................................................................13

2.2 Signal Descriptions....................................................................................13

3 ATA Command Sets ............................................................15

3.1 ATA Command ........................................................................................15

3.2 Power Management Command Set.................................................................19

3.3 Security Mode Feature Set...........................................................................19

3.4 SMART Command Set ...............................................................................19

3.5 Host Protected Area Command Set.................................................................20

3.6 48-Bit Address Command Set .......................................................................21

3.7 Device Configuration Overlay Command Set......................................................21

3.8 General Purpose log Command Set ................................................................21

4 SATA Command Sets...........................................................22

4.1 SATA Command.......................................................................................22

5 References..........................................................................23

6 Getting Service ...................................................................24

4 Specification

Introduction

1.1

Overview

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s MLC Solid State Drive (SSD) delivers leading performance a JEDEC

MO-297 Half-Slim form factor while simultaneously improving system responsiveness for mobile applications

over standard rotating drive media or hard disk drives. By combining leading NAND flash memory technology

with our innovative high performance firmware, ADLINK delivers a SSD for native Serial Advanced Technology

Attachment (SATA) hard disk drive drop-in replacement with enhanced performance, reliability, ruggedness and

power savings, since there are no rotating platters, moving heads, fragile actuators, or unnecessary delays due

to spin-up time or positional seek time that can slow down the storage subsystem significantly I/O and

throughput performance improvement as compared to rotating media or hard disk drives. This document

describes the specifications of the ASDHS-MLC64G Half-Slim SATA 6 Gb/s MLC SSD in Half-Slim (JEDEC MO-297)

form factor.

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s MLC SSD primarily targets SATA based laptop PCs, highly rugged

mobile client devices, as well as thin and light, mini/sub-notebooks. Key attributes include high performance,

low power, increased system responsiveness, high reliability, and enhanced ruggedness as compared to

standard mobile SATA hard drives. The ASDHS-MLC64G Half-Slim SATA 6 Gb/s MLC SSD is available in 2.5" and

Half-Slim form factors that are electrically, mechanically, and software compatible with existing 2.5” Serial ATA

slots and cables. Our flexible design allows interchangeability with existing mobile hard drive based on the SATA

interface standard.

1.2

Product Specification

1.2.1. Form Factor: Available in 2.5” and Half-Slim (JEDEC MO-297) SSD form factor

1.2.2. Capacity: 64GB (ASDHS-MLC64G-C2 )

Unformatted capacity Total user addressable sectors

in LBA mode

64GB 125,045,424

Table 1: User Addressable Sectors

Notes: 1. 1GB=1,000,000,000 bytes and not all of the memory can be used for storage.

2. 1 Sector = 512 bytes

1.2.3. Flash: Multi-Level Cell (MLC) component with Toggle-Mode (24nm )

Specification 5

1.2.4. Bandwidth Performance (CrystalDiskMark)

Access Type MB/s

Sequential Read Up to 350 (SATA 6 Gb/s, Secondary)

Sequential Write Up to 170 (SATA 6 Gb/s, Secondary)

Table 2: Maximum Sustained Read and Write Bandwidth

Notes: 1). Performance measured using CrystalDiskMark.

2). 1 MB/sec = 1,048,576 bytes/sec is used in measuring sequential performance. If

1 MB/sec = 1,000,000 bytes/sec is used, performance values become 4.85% higher.

1.2.5. Read and Write IOPS (IOMETER)

Access Type IOPS

4K Read (IOPS) 48,000 (SATA 6 Gb/s, Secondary)

4K Write (IOPS) 38,000 (SATA 6 Gb/s, Secondary)

Table 3: Random Read/Write Input/Output Operations per Second

Notes: 1. Performance measured using IOMETER Pro with queue depth set to 32

2. Write cache enabled

3. Test computer: Dell E6400 (SATA 3 Gb/s - Win7 x64) and Sandy Bridge (SATA 6 Gb/s –

Win7 x64)

1.2.6. Power on to ready:

Type Average Latency

Power on to Ready 1s

Table 4: Latency Specifications

Notes: 1. Write cache enabled

2. Device measured using Drive Master

3. Power on to ready time assumes proper shutdown

(Power removal preceded by STANDBY command)

6 Specification

1.2.7. Compatibility

-- SATA Revision 3.0 compliant

Compatible with SATA 1.5Gb/s, 3Gb/s & 6Gb/s interface rates

-- ATA/ATAPI- 8 compliant

-- SSD enhanced SMART ATA feature set

-- Native Command Queuing (NCQ) command set

-- TRIM supported

1.2.8. Certifications

Certification Description

CE compliant Indicates conformity with the essential health and safety requirements

set out in European Directives Low voltage Directive and EMC Directive

UL certified Underwriters Laboratories, Inc. Component Recognition UL60950-1

BSMI

Compliance to the Taiwan EMC standard “Limits and methods of Radio

Disturbance Characteristics of Information Technology Equipment, CNS

13438 Class B”

Microsoft WHQL Microsoft Windows Hardware Quality Labs

RoHS compliant Restriction of Hazardous Substance Directive

Table 6: Device Certifications

1.2.9. Power Management

-- 5V SATA

-- SATA interface power management

-- OS-aware hot plug/removal

1.2.10. Power consumption

Description Min Max Unit

Operating voltage for 5V (+/- 5%) 4.75 5.25 V

Table 7: Operating Voltage

Mode Type Unit

Active (average) 2.8 W

Idle (average) 0.7 W

Table 8: Typical Power Consumption

Note: Active power is measured using IOMETER Power Consumption using Data Logger _No DIPM

Specification 7

1.2.11. Temperature

Environment Mode Min Type Max Unit

Operating 0 70 °C

Ambient Temperature

Non-operating -40 85 °C

Operation 5 95 %

Humidity

Non-operation 5 95 %

Table 9: Temperature Relative Specifications

Note: Measured without condensation

1.2.12. Reliability

Parameter Value

Mean Time between Failure (MTBF) 1,500,000 hours

Power on/off cycles 50000 cycles

Table 10: Reliability Specifications

1.2.14. Shock and Vibration:

Item Mode Timing/Frequency Max

Non-operating At 1 msec 1500G

Shock1

Non-operating At 2 msec 1000G

Operation 7~800 Hz 2.17Grms

Vibration2

Non-operation 7~800 Hz 3.08Grms

Table11: Shock and Vibration

Notes:

1. Shock specifications assume that the SSD is mounted securely with the input vibration

applied to the drive mounting screws. Stimulus may be applied in the X, Y or Z axis

2. Vibration specifications assume that the SSD is mounted securely with the input

vibration applied to the drive mounting screws. Stimulus may be applied in the X, Y or Z

axis. The measured specification is in root mean squared form.

8 Specification

1.2.15. Electromagnetic Immunity

Electromagnetic Immunity tests assume the SSD is properly installed in the representative host system. The

drive operates properly without errors degradation in performance when subjected to radio frequency (RF)

environments defined in the following table.

Test Description Performance criteria Reference standard

Electrostatic discharge Contact ±4KV

Air: ±8KV A IEC 61000-4-2:2008

Electrostatic discharge Contact ±6KV

Air: ±12KV B IEC 61000-4-2:2008

Electrostatic discharge Contact ±8KV

Air: ±15KV C IEC 61000-4-2:2008

Radiated RF immunity

80~1000MHz, 3V/m,

80% AM with 1 KHz sine

900 MHz, 3 V/m, 50%

pulse modulation at

200Hz

A IEC 61000-4-3:2008

Electrical fast transient ±1KV on AC mains

±0.5KV on external I/O B

IEC 61000-4-4:2004

+Corr.1:2006

+Corr.2:2007

Surge immunity ±1KV differential ±2KV

common, AC mains B IEC 61000-4-5:2008

Conducted RF immunity 150KHz~80 MHz, 3 Vrms,

80% AM with 1KHz sine A IEC 61000-4-6:2008

Power frequency

magnetic filed 50Hz, 1A/m (r.m.s) A IEC 61000-4-6:2008

Table 12: Radio Frequency Specifications

Notes:

1. Performance criterion A = The device shall continue to operate as intended, i.e.,

normal unit operation with no degradation of performance.

2. Performance criterion B = The device shall continue to operate as intended after

completion of test, however, during the test, some degradation of performance is

allowed as long as there is no data loss operator intervention to restore device

function.

3. Performance criterion C = Temporary loss of function is allowed. Operator

intervention is acceptable to restore device function.

4. Contact electrostatic discharge is applied to drive enclosure.

1.2.16. Weight: 10 g Max

1.2.17. Dimension: 39.0 x 54.0 x 4 mm (L x W x H)

1.2.18. Part Numbers:

Product Name Part No.

ASDHS-MLC64G-C2 92-99060-7010

Specification 9

1.3

Functional Block Diagram

SATA

Host

Interface

DDR3

DRAM

NAND

Flash

Array

Flash Memory

Controller

1.4

Product Images

1.4.1. Half-Slim SATA SSD

10 Specification

1.5

Mechanical Drawing: Compatible with JEDEC MO-297 ( w/o case )

Dimensions in mm.: 39.0 x 54.0 x 4 mm (L x W x H)

Specification 11

1.6

Architecture

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s Solid State Drive (SSD) utilizes a cost effective system-on-chip

(SoC) design to manage a full SATA 6 Gb/s bandwidth with the host while managing multiple flash memory

devices on multiple channels internally.

1.7

Hot Plug Support

Hot Plug insertion and removal are supported when the correct connector and an appropriate operating

system (OS) are used as described in the SATA 3.0 Specification. This product supports asynchronous signal

recovery and will establish communications with a host system without hardware device detection by

issuing an unsolicited COMINIT when first mated with a powered connector.

12 Specification

Pin Locations and Signal Descriptions

2.1

Pin Locations

The data and power connector pin locations of the ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD are as shown

below.

2.2

Signal Descriptions

Data Connector:

Name Type Description

S1 GND

S2 A+

S3 A-

Differential Signal Pair A

S4 GND

S5 B-

S6 B+

Differential Signal Pair B

S7 GND

Table 13: Serial ATA Data Connector Pin Definitions

Specification 13

Power Connector:

Name Type Description

P1 V33 3.3V Power

P2 V33 3.3V Power

P3 V33 3.3V Power, Pre-change

P4 GND

P5 GND

P6 GND

P7 V5 5V Power, Pre-change

P8 V5 5V Power

P9 V5 5V Power

P10 GND

P11 DAS/DSS

Device Activity Signal / Disable Staggered

Spinup

P12 GND

P13 V12 12V Power, Pre-change

P14 V12 12V Power

P15 V12 12V Power

Table 14: Serial ATA Power Connector Pin Definitions

Note:

1. All pins are in a signal row, with a 1.27mm (0.05”) pitch

2. Pins P1, P2 and P3 are connected together, although they are not connected internally to

the device. The host may put 3.3v on these pins.

3. The mating sequence is

- The ground pins P4-P6, P10, P12 and the 5V power pin P7

- The signal pins and the rest of the 5V power pins P8-P9

4. Ground connectors P4 and P12 may contact before the other 1st mate pins in both the

power and signal connectors to discharge ESD in a suitably configured backplane connector.

5. Power pins P7, P8 and P9 are internally connected to one another within the device.

6. The host may ground P11 if it is not used for Device Activity Signal (DAS)

7. Pins P13, P14, P15 are connected together, although they are not connected internally to

the device.

14 Specification

ATA Command Sets

3.1

ATA Command

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports all the mandatory ATA commands defined in the

ATA/ATAPI-8 specification.

3.1.1. ATA General Feature Command Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the ATA General feature Command set (non-

packet), which consists of

．EXECUTE DEVICE DIAGNOSTIC

．FLUSH CACHE

．IDENTIFY DEVICE

．READ DMA

．READ SECTOR(S)

．READ VERIFY SECTORS(S)

．SEEK

．SET FEATURES

．WRITE DMA

．WRITE SECTOR(S)

．READ MULTIPLE

．SET MULTIPLE MODE

．WRITE MULTIPLE

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports all the following optional commands

．READ BUFFER

．WRITE BUFFER

．NOP

．DOWNLOAD MICROCODE

Specification 15

3.1.2. Identify Device Data

The following table details the sector data returned after issuing an IDENTIFY DEVICE command.

Word

F=Fixed

V=Variable

X=Both

Default Value Description

0 F 0040h

General configuration bit-significant

information

1 X 3FFFh Obsolete-Number of logical cylinders (16,383)

2 V C837h Specific configuration

3 X 0010h Obsolete-Number of logical heads (16)

4-5 X 0h Retired

6 X 003Fh

Obsolete-Number of logical sectors per logical

track (63)

7-8 V 0h Reserved for assignment by the Compact

Flash Association

9 X 0h Retired

10-19 F varies Serial number (20 ASCII characters)

20-21 X 0h Retired

22 X 0h Obsolete

23-26 F varies Firmware revision (8 ASCII characters)

27-46 F varies Model number

47 F 8010h

7:0 – Maximum number of sectors transferred

per interrupt on multiple commands

48 F 0h Reserved

49 F 2F00h Capabilities

50 F 4000h Capabilities

51-52 X 0h Obsolete

53 F 0007h Words 88 and 70:64 valid

54 X 3FFFh

Obsolete - Number of logical cylinders

(16,383)

55 X 0010h Obsolete - Number of logical heads (16)

56 X 003Fh

Obsolete - Number of logical sectors per

logical track (63)

57-58 X 00FBFC10h Obsolete

59 F 0101h

Number of sectors transferred per interrupt

on multiple commands

60-62 125,045,424

63 F (64GB) Total number of user addressable sectors

64 F 0007h Multi-word DMA modes supported/selected

65 F 0003h PIO modes supported

66 F 0078h

Minimum multiword DMA transfer cycle time

per word

67 F 0078h

Manufacture’s recommended multiword

DMA transfer cycle time

68 F 0078h

Minimum PIO transfer cycle time without flow

control

69-70 F 0078h

Minimum PIO transfer cycle time with IORDY

flow control

16 Specification

F=Fixed

V=Variable

Word Default Value Description

X=Both

71-74 F 0h Reserved (for future command overlap and

queuing)

75 F 0h

Reserved for the IDENTIFY packet DEVICE

command

76 F 001Eh Queue depth

77 F 0106h Serial ATA capabilities

78 F 0h Reserved for future Serial ATA definition

79 F 0048h Serial ATA features supported

80 V 0040h Serial ATA features enabled

81 F 00FCh Major Version Number

82 F 001Ah Minor Version Number

83 F 746Bh Command set supported

84 F 7C01h Command sets supported

85 F 6123h Command set /feature supported extension

86 V 7469h Command set /feature enabled

87 V BC01h Command set /feature enabled

88 V 6123h Command set /feature default

89 V 407Fh Ultra DMA modes

90 F 0001h

Time required for security erase unit

completion

91 F 0001h

Time required for enhanced security erase

completion

92 V 0h Current advanced power management value

93 V 0FFFEh Master Password Revision Code

94 F 0h

Hardware reset result. The contents of bits

(12:0) of this word shall change only during

the execution of a hardware reset.

95 V 0h

Vendor’s recommended and actual acoustic

management value

96 F 0h Stream Minimum Request Size

97 V 0h Streaming Transfer Time - DMA

98-99 V 0h Streaming Access Latency - DMA and PIO

100-103 F 0h Streaming Performance Granularity

104 125,045,424

105 V (64GB)

Maximum user LBA for 48-bit Address feature

set

106 V 0h Streaming Transfer Time - PIO

107 F 0h Reserved

108-111 F 4000h Physical sector size/logical sector size

112-115 F 0h Inter-seek delay for ISO-7779 acoustic testing

in microseconds

116 F varies Unique ID

117-118 F 0h Reserved for word wide name extension to

128 bits

119 V 0h Reserved for technical report

120 F 0h Words per logical sector

Specification 17

F=Fixed

V=Variable

Word Default Value Description

X=Both

121-126 F 401Ch Supported settings

127 F 401Ch Command set/feature enabled/Supported

128 F 0h Reserved

129-159 F 0h Removable Media Status Notification feature

set support

160 V 0021h Security status

161-175 X 0h Vendor specific

176-205 F 0h Compact Flash Association (CFA) power mode

206-216 X 0h Reserved for assignment by the CFA

217 V 0h Current media serial number

218-221 F 0h Reserved

222 F 0001h Non-rotating media device

223-233 F 0h Reserved

234 F 101F Reserved

235 F 0h Reserved

236-254 0001h Reserved

255 02A0h Reserved

236-254 F 0h Reserved

255 X varies Integrity word (checksum and signature)

Table 15: Returned Sector Data

Notes:

1. F=Fixed. The content of the word is fixed and does not change for removable media devices,

these values may change when media is Removed or changed.

2. V=Variable. The state of at least one bit in a word is variable and may change depending on

the state of the device or the commands executed by the device.

3. X=F or V. The content of the word may be fixed or variable.

18 Specification

3.2

Power Management Command Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the power management command set, which

consists of

．CHECK POWER MODE

．IDLE

．IDLE IMMEDIATE

．SLEEP

．STANDBY

．STANDBY IMMEDIATE

3.3

Security Mode Feature Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the Security Mode command set, which consist of

．SECURITY SET PASSWORD

．SECURITY UNLOCK

．SECURITY ERASE PREPARE

．SECURITY ERASE UNIT

．SECURITY FREEZE LOCK

．SECURITY DISABLE PASSWORD

3.4

SMART Command Set

The ASDHS-MLC64G SATA SSD supports the SMART command set, which consist of

．SMART ENABLE OPERATIONS

．SMART DISABLE OPERATIONS

．SMART ENABLE/DISABLE AUTOSAVE

．SMART RETURN STATUS

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the the following optional commands.

．SMART EXECUTE OFF-LINE IMMEDIATE

．SMART READ DATA

．SMART READ LOG

．SMART WRITE LOG

Specification 19

The table below lists the SMART commands.

Subcommand Code LBA Low value

SMART ATTRIBUTE VALUES (READ DATA) D0h

READ ATTRIBUTE THRESHOLDS D1h

ENABLE/DISABLE ATTRIBUTE AUTOSAVE D2h

SAVE ATTRIBUTE VALUES D3h

EXECUTE OFF-LINE IMMEDIATE D4h

EXECUTE SMART OFF-LINE ROUTINE 00h

EXECUTE SMART SHORT SELF-TEST ROUTINE (OFFLINE) 01h

EXECUTE SMART EXTENDED SELF-TEST ROUTINE (OFFLINE) 02h

ABORT OFF-LINE ROUTINE 7Fh

EXECUTE SMART SHORT SELF-TEST ROUTINE (CAPTIVE) 81h

EXECUTE SMART EXTENDED SELF-TEST ROUTINE ( CAPTIVE ) 82h

READ LOG SECTOR D5h

WRITE LOG SECTOR D6h

ENABLE SMART OPERATIONS D8h

DISABLE SMART OPERATIONS D9h

RETURN SMART STATUS DAh

Table 16: SMART commands

3.5

Host Protected Area Command Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the Host Protected Area command set which

consists of

．READ NATIVE MAX ADDRESS

．SET MAX ADDRESS

．READ NATIVE MAX ADDRESS EXT

．SET MAX ADDRESS EXT

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the following optional commands.

．SET MAX SET PASSWORD

．SET MAX LOCK

．SET MAX FREEZE LOCK

．SET MAX UNLOCK

20 Specification

3.6

48-Bit Address Command Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the Host Protected Area command set, which

consists of

．READ NATIVE MAX ADDRESS

．FLUSH CACHE EXT

．READ DMA EXT

．READ NATIVE MAX ADDRESS EXT

．READ SECTOR(S) EXT

．READ VERIFY SECTOR(S) EXT

．SET MAX ADDRESS EXT

．WRITE DMA EXT

．WRITE MULTIPLE EXT

．WRITE SECTOR(S) EXT

3.7

Device Configuration Overlay Command Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the Device configuration Overlay command set,

which consists of

．DEVICE CONFIGURATION FREEZE LOCK

．DEVICE CONFIGURATION IDENTITY

．DEVICE CONFIGURATION RESTORE

．DEVICE CONFIGURATION SET

3.8

General Purpose log Command Set

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the general purpose log command set, which

consists of

．READ LOG EXT

．WRITE LOG EXT

Specification 21

SATA Command Sets

4.1

SATA Command

The SATA 3.0 specification is a super set of the ATA/ATAPI-8 specification with regard to supported

commands. The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the following features which are

unique to SATA Specification.

4.1.1. Software Settings Preservation

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the SET FEATURES parameter to enable/disable

the preservation of software settings.

4.1.2. Native Command Queuing

The ASDHS-MLC64G Half-Slim SATA 6 Gb/s SSD supports the Native Command Queuing (NCQ) command

set, which includes.

．READ FPDMA QUEUED

．WRITE FPDMA QUEUED

Note: with a maximum queue depth equal to 31

22 Specification

References

This document references standards defined by a variety of organizations use the following list to identify the

location of an organization’s standards information.

Date Title Location

Dec 2008 VCCI http://www.vcci.or.jp/vcci_e/general/

join/index.html

July 2007 ROHS Search for material description datasheet

at http://intel.pcnalert.com

July 2007 SFF-8144, 1.8” drive form factor http://www.sffcommittee.org

February 2007 Serial ATA Revision 2.6 http://www.sata-io.org

May 2006 SFF-8223, 2.5” Drive w/Serial Attachment Connector http://www.sffcommittee.org

May 2005 SFF-8201, 2.5” drive form factor http://www.sffcommittee.org

April 2004 ATA-7 Spec. Volume 1 http://www.t13.org/

Aug. 2009 ATA-8 Spec. Rev 2 http://www.t13.org/

1995

1996

1995

1997

International Electro Technical Commission EB61000

-2 Personnel Electrostatic Discharge Immunity

4-3 Electromagnetic compatibility (EMC)

4-4 Electromagnetic compatibility (EMC)

4-5 Electromagnetic compatibility (EMC)

4-6Electromagnetic compatibility (EMC)

1994 4-11 (Voltage variations)

http://www.iec.ch

1995 ENV 50204 (Radiated electromagnetic field from

digital radio telephones) http://www.iec.ch

Table 17: Standards References

Specification 23

Getting Service

ADLINK Technology, Inc.

Address: 9F, No.166 Jian Yi Road, Zhonghe Distri ct

New Taipei City 235, Taiwan

新北市中和區建一路 166 號9樓

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

Ampro ADLINK Technology , Inc.

Address: 5215 Hellyer Avenue, #110, San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

ADLINK Technology (China) Co., Ltd.

Address: 上海市浦东新区张江高科技园区芳春路 300 号 (201203)

300 Fang Chun Rd., Zhangjiang Hi-Tech Park,

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

ADLINK Technology Beijing

Address: 北京市海淀区上地东路 1号盈创动力大厦 E座801 室(100085)

Rm. 801, Power Creative E, No. 1, B/D

Shang Di East Rd., Beijing, 100085 China

Tel: +86-10-5885-8666

Fax: +86-10-5885-8625

Email: market@adlinktech.com

ADLINK Technology Shenzhen

Address: 深圳市南山区科技园南区高新南七道数字技术园 A1栋2楼C区 (518057)

2F, C Block, Bldg. A1, Cyber-Tech Zone, Gao Xin Ave. Sec. 7,

High-Tech Industrial Park S., Shenzhen, 518054 China

Tel: +86-755-2643-4858

Fax: +86-755-2664-6353

Email: market@adlinktech.com

24 Specification

LiPPERT ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11, D-68163, Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

ADLINK Technology, Inc. (French Liaison Office)

Address: 15 rue Emile Baudot, 91300 Massy CEDEX, France

Tel: +33 (0) 1 60 12 35 66

Fax: +33 (0) 1 60 12 35 66

Email: france@adlinktech.com

ADLINK Technology Japan Corporation

Address: 〒101-0045 東京都千代田区神田鍛冶町 3-7-4

神田 374 ビル 4F

KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho,

Chiyoda-ku, Tokyo 101-0045, Japan

Tel: +81-3-4455-3722

Fax: +81-3-5209-6013

Email: japan@adlinktech.com

ADLINK Technology, Inc. (Korean Liaison Office)

Address: 서울시 서초구 서초동 1675-12 모인터빌딩 8층

8F Mointer B/D,1675-12, Seocho-Dong, Seoch o-Gu,

Seoul 137-070, Korea

Tel: +82-2-2057-0565

Fax: +82-2-2057-0563

Email: korea@adlinktech.com

ADLINK Technology Singapore Pte. Ltd.

Address: 84 Genting Lane #07-02A, Cityneon Design Centre,

Singapore 349584

Tel: +65-6844-2261

Fax: +65-6844-2263

Email: singapore@adlinktech.com

ADLINK Technology Singapore Pte. Ltd. (Indian Liaison Office)

Address: 1st Floor, #50-56 (Between 16th/17th Cross) Margosa Plaza,

Margosa Main Road, Malleswaram, Bangalore-560055, India

Tel: +91-80-65605817, +91-80-42246107

Fax: +91-80-23464606

Email: india@adlinktech.com

Specification 25

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

ADLINK Technology:

ASDHS-MLC64G-C2 ASDHS-MLC64G-CT