TartanTM Box Sealing Tape 369 Technical Data January, 2011 Product Description TartanTM Box Sealing Tape 369 is a general purpose packaging tape used for noncritical box sealing applications. This product has a conformable backing and a pressure sensitive hot melt adhesive system. This construction provides a good closure for lightweight boxes exposed to minimal distribution hazards. Construction Backing Adhesive Colors Biaxially oriented polypropylene film Pressure sensitive hot melt rubber-resin Clear and tan Typical Physical Properties Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. ASTM Test Method Features Adhesion to Steel: 30 oz./in. width (32 N/100 mm width) D-3330 Tensile Strength: Machine Direction: Cross Direction: 19 lbs./in. width (333 N/100 mm width) 38 lbs./in. width (666 N/100 mm width) D-3759 D-3759 Elongation at Break: 160% D-3759 Thickness - Backing: Total: 1.0 mil (0.025 mm) 1.6 mil (0.041 mm) D-3652 D-3652 Holding Power to Fiberboard: 1,000 + minutes D-3654 * Adheres to a variety of surfaces. * Low strength conformable backing. * Edge tear and split resistance. * Good holding power to fiberboard. * Reliable closures. * Roll to roll consistency increases productivity for improved unit costs. * Meets FDA requirements for indirect food contact. Available Sizes Standard Widths: Core Size (ID): Lengths: Clear Tan 36 mm, 48 mm, 72 mm 48 mm and 72 mm 3 in. 3 in. 50 m, 100 m, 914 m, 1500 m 100 m TartanTM Box Sealing Tape 369 Application Techniques An extensive line of application equipment including hand held manual dispensers and semi-automatic and fully automatic equipment is available. Application of TartanTM Box Sealing Tape 369 is most easily accomplished at room temperature. At colder temperatures, approaching 32F (0C), the adhesive becomes more firm. Once applied, Tartan tape 369 performs well throughout the normal temperature ranges typically encountered by packaged products in shipping and storage environments. Storage Conditions Store in a clean, dry place. Temperature of 40-80F (4-26C) and 40 to 50% relative humidity are recommended. Shelf Life To obtain best performance, use this product within 18 months from date of manufacture. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. ISO 9001: 2008 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards. 3 Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 * 877-369-2923 (Fax) www.3M.com/industrial Recycled Paper 40% pre-consumer 10% post-consumer Tartan is a trademark of 3M. Printed in U.S.A. (c)3M 2011 70071002094 (1/11) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 369-72x100 369-48x50TAN 369-48x50CLR