1 Pt100 KN 2510 The KN Series Ceramic Wire Wound PRTDs are suitable for general applications requiring temperature stability. Applications: Industrial resistance thermometers, especially in chemical, power generation plants and analytical equipment. Construction: A platinum coil is sealed inside a high purity aluminum oxide ceramic body. Lead wires are shear force resistant and assure proper connection to extension leads and cables. Models Description Tolerance IEC 60751 Order No. 1Pt100 KN 2510 W0.3 W0.15 W0.1 32.206.362 32.206.365 32.206.368 Response time Self Heating Water current Air stream 0C (K/mW) V=3m/s V=0.4m/s Dimensions mm L +2 25- 0 D d l 1.00.15 0.200.01 10.00.5 0.07 t 0.5 t 0.9 t 0.5 t 0.9 0.2 0.4 3.0 8.8 Technical Specification Nominal resistance: 100 Ohm @ 0 C Measuring current: Temperature range: W0.3 (Class B) = -196 to +660 C Tolerance class: W0.15 (Class A) = -196 to +600 C 1 mA - According to IEC 60751:2008 - Other standards and narrower tolerances are available on request (Heraeus exceeds IEC 60751: -100 to +450 C) W0.1 (Class 1/3 B) = -100 to +350 C Temperature stability: Excellent long-term stability Also available: Temperature coefficient: Tc = 3850 ppm/K Leads: Palladium-gold alloy Insulation resistance > 100 MOhm @ 25 C after assembly: - Platinum-gold alloy - Different temperature coefficients (3916 ppm/K - old JIS) - Extension leads - Two separated coils can be embedded in one ceramic body Status 01/2009. Technical modifications reserved. The measuring point is located at 8 mm from the end of the sensor body Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com www.hst-us.com Status: HSTUSA 10/09 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Heraeus: 32206362 32206368 32206365