ALPHA WIRE
CUSTOMER PRODUCT SPECIFICATION
Part Number: 75012 Issue: 2
Page 1 of 2 Pages Issue Date: 4/18/2012
Effective Date: 4/24/2012
This specification outlines the requirements for the product(s) described herein. Deviations from this specification are not permitted without the written
authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the specification and noncompliance or unauthorized
deviations will be cause for rejection and return of product.
If vendor certifying agency requirements are in conflict with this document, it is incumb e nt upon the vendor to notify the A lpha Wire Engineering
Department and mark up differences on this document and submit them for review and approval prior to any production. Be advised that product legend
information and product l egend information and product label information mu st be in concert; both are the responsibility of the vendor.
It is the responsibility of the vendor to insure that this product meets the requirements of subservient certifying agency documents even though they are not
directly noted herein.
All information contained herein is confidential. Its use is restricted to authorized Alpha Wire Company personnel or authorized vendors of the Alpha Wire
Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed with unauthorized personnel without the expressed
written consent of the Alpha Wire Engineering Department.
711 Lidgerwood Ave Elizabeth, NJ 07207-0711
Toll Free 1-800-52 ALPHA • T: 1-908-925-8000 • F: 908-925-5411 • Email: info@alphawire.com
www.alphawire.com
A. Construction Diam eters (I n)
1) Component 1 2 X 1 PAIR
a) Conductor 24 (SOLID) AWG BC 0.023
b) Insulation 0.014" Wall, Nom. Polypropylene (PP) 0.050
(1) Color(s)
Pair Color Pair Color Pair Color
1 BLU - WHT/BLU 2 ORG – WHT/ORG
c) Pair 2/Cond Cabled Together
(1) Lay Length: Various Lay
2) Cable Assembly 2 Components Bunch Cabled
a) Twists: 4.0 Twists/foot
b) Core Wrap: Clear Mylar Tape, 25% Overlap, Min.
3) Shield: A/P/A Tape, 25% Overlap, Min.
a) Drain Wire 26 (SOLID) AWG TC
b) Braid TC,70% Coverage, Min.
4) Jacket 0.035 Wall, Nom. TPE 0.325 (0.345 Max.)
a) Color(s) BLACK
b) Ripcord Nylon
c) Print ALPHA WIRE-* P/N 75012 2PR 24 AWG
XTRA-GUARD(R) INDUSTRIAL ETHERNET (UL) C(UL) TYPE
CMR 75C FT4 ANSI/TIA-568-C.2 CAT5E VERIFIED
ROHS (SEQUENTIAL FOOTAGE MARKING)
* = Factory Code
B. Applicable Specifications
1) UL CMR 75°C
FT4
2) CSA International C(UL) TYPE CMR 75°C
FT4
3) CE: LVD 73/23/EEC Amendment 93/68/EEC
C. Environmental Compliance
1) EU Directive 2002/95/EC(RoHS):
All materials used in the manufacture and packaging of this part must meet the
requirement of EU Directive 2002/95/EU regarding the restriction of use of certain
hazardous substances in electrical and electronic equipment.
D. Physical & Mechanical Properties
1) Temperature Range -50 to 105°C
2) Bend Radius 8X Cable Diameter
3) Pull Tension 21.1 Lbs, Maximum
4) Sunlight Resistance Yes
E. Electrical Properties (For Engineering purposes only)
1) Voltage Rating 300 VRMS
2) Characteristic Impedance 100 Ω +/- 15
3) Mutual Capacitance 5.6 nF/100m Max
4) Velocity of Propagation 70 % Nom.
5) Conductor DCR 9.38 Ω/100m Max
6) Skew 45 ns/100m Max
7) Pair to Ground Unbalance 330 pF/100m Max
8) DC Unbalance of a Pair 5% Max
ALPHA WIRE
CUSTOMER PRODUCT SPECIFICATION
Part Number: 75012 Issue: 2
Page 2 of 2 Pages Issue Date: 4/18/2012
Effective Date: 4/24/2012
This specification outlines the requirements for the product(s) described herein. Deviations from this specification are not permitted without the written
authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the specification and noncompliance or unauthorized
deviations will be cause for rejection and return of product.
If vendor certifying agency requirements are in conflict with this document, it is incumb e nt upon the vendor to notify the A lpha Wire Engineering
Department and mark up differences on this document and submit them for review and approval prior to any production. Be advised that product legend
information and product l egend information and product label information mu st be in concert; both are the responsibility of the vendor.
It is the responsibility of the vendor to insure that this product meets the requirements of subservient certifying agency documents even though they are not
directly noted herein.
All information contained herein is confidential. Its use is restricted to authorized Alpha Wire Company personnel or authorized vendors of the Alpha Wire
Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed with unauthorized personnel without the expressed
written consent of the Alpha Wire Engineering Department.
711 Lidgerwood Ave Elizabeth, NJ 07207-0711
Toll Free 1-800-52 ALPHA • T: 1-908-925-8000 • F: 908-925-5411 • Email: info@alphawire.com
www.alphawire.com
9) Insertion Loss 2.4 (Max dB/100m ) @ 1 MHz
4.9 (Max dB/100m ) @ 4 MHz
6.9 (Max dB/100m ) @ 8 MHz
7.8 (Max dB/100m ) @ 10 MHz
9.9 (Max dB/100m ) @ 16 MHz
11.1 (Max dB/100m ) @ 20 MHz
12.5 (Max dB/100m ) @ 25 MHz
14.1 (Max dB/100m ) @ 31.25 MHz
20.4 (Max dB/100m ) @ 62.5 MHz
26.4 (Max dB/100m ) @ 100 MHz
F. Other
1) Packaging Flange x Traverse x Barrel (inches)
a) 1000 FT 18 x 10.5 x 8 Continuous length
b) 500 FT 12.5 x 9 x 8 Continuous length
[Spool dimensions may vary slightly]
