(1/13) Common Mode Choke Coils(Line Filters) for AC Power Supply Conformity to RoHS Directive Toroidal Core Type TF Series TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(EMI) and radio frequency interference(RFI) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. FEATURES * Wide range of selection. * High impedance at applicable frequency. * High self-resonant frequency. PRODUCT IDENTIFICATION TF (1) (2) V - A (3) (4) Y (5) R (6) - 01 (7) (1) Core shape TF: Toroidal core (2) Dimensional code Widthx Depth (3) External shape code V: Vertical type H: Horizontal type (4) High material (5) Inductance value Example) 133:13mH (6) Rated current value Example) 3R0:3.0A (7) Product management number SELECTION CHART Series Configuration Vertical type TF Horizontal type Vertical type (For high frequency) Type Inductance value min. Rated current (A) Handling power Lx I2(mHx A2) Weight (g)typ. TF1813V TF2518V TF2721V TF3020V TF3525V TF1713H TF2520H TF2722H TF3022H TF3526H TF2628V-1H TF3524V-1H 2 to 20mH 0.65 to 9mH 1 to 13mH 0.35 to 13mH 0.65 to 20mH 2 to 20mH 0.65 to 9mH 1 to 13mH 0.35 to 13mH 0.65 to 20mH 25 to 65H 25 to 120H 0.7 to 3.2 2.5 to 10 2.5 to 10 3 to 20 3 to 20 0.7 to 3.2 2.5 to 10 2.5 to 10 3 to 20 3 to 20 6 to 12 8 to 20 20 50 75 130 195 20 50 75 130 195 3.65 10.8 5 15 20 30 41 5.3 15 20 32 42 18 40 Minimum package quantity (pieces/box) 960 560 460 440 240 960 550 380 320 280 700 320 Handling power=(Inductance value)x (Current)2. It is possible to design within the range below this value. [Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (2/13) Horizontal Type TF Series FEATURES * This series uses a high permeability toroidal ferrite core and therefore provide large inductance with a little number of turns. * Therefore its stray capacity is small and it keeps the impedance required to effectively suppress high frequency noises. * Products mounted on a base with fixed leads are easy to insert to circuit boards. TF1713H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 70.5 4 2 3 100 A203Y0R7 A153Y1R0 20max. 17.50.5 1 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS o0.7 17max. 4 2 3 Impedance (k) 3.51 13max. 10 1 Weight: 5.3g typ. A652Y1R6 1 Recommended hole diameter: o1.2 Dimensions in mm A502Y2R0 A202Y3R2 0.1 0.01 Part No. TF1713H-A203Y0R7-01 TF1713H-A153Y1R0-01 TF1713H-A652Y1R6-01 TF1713H-A502Y2R0-01 TF1713H-A202Y3R2-01 DC resistance ()max. 0.73 0.44 0.19 0.14 0.065 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF1713H-A 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (mH)min. 20 15 6.5 5 2 0.1 960pieces/box Rated current Iac(A)max. 0.7 1 1.6 2 3.2 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (3/13) TF2520H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 25max. 2 (11) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 3 3.750.75 10 1 1 2 Impedance (k) 20max. Lot No. 4 4 3 1 0.1 Weight: 15g typ. 702Y3R0 502Y4R0 252Y5R0 102Y8R0 651Y10R0 Recommended hole diameter: od+0.5 Dimensions in mm 0.01 0.01 ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. ()max. TF2520H-A902Y2R5-01 9 0.12 TF2520H-A702Y3R0-01 7 0.095 TF2520H-A502Y4R0-01 5 0.075 TF2520H-A252Y5R0-01 2.5 0.05 TF2520H-A102Y8R0-01 1 0.025 TF2520H-A651Y10R0-01 0.65 0.02 0.1 1 Frequency (MHz) 10 100 RATINGS Rated current Iac(A)max. 2.5 3 4 5 8 10 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF2520H-A 902Y2R5 (20) 25max. 100 550pieces/box od (mm) 0.6 0.65 0.7 0.75 0.95 1 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (4/13) TF2722H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 27max. 2 (11) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 3 3.750.75 10 1 1 2 Impedance (k) 22max. Lot No. 4 4 3 1 0.1 Weight: 20g typ. 103Y3R0 652Y4R0 422Y5R0 152Y8R0 102Y10R0 Recommended hole diameter: od+0.5 Dimensions in mm 0.01 0.01 ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. (m)max. TF2722H-A133Y2R5-01 13 130 TF2722H-A103Y3R0-01 10 90 TF2722H-A652Y4R0-01 6.5 60 TF2722H-A422Y5R0-01 4.2 40 TF2722H-A152Y8R0-01 1.5 20 TF2722H-A102Y10R0-01 1 11 0.1 1 Frequency (MHz) 10 100 RATINGS Rated current Iac(A)max. 2.5 3 4 5 8 10 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF2722H-A 133Y2R5 (20) 27max. 100 380pieces/box od (mm) 0.65 0.7 0.8 0.9 1 1.2 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (5/13) TF3022H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 30max. 2 (11) 3 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 100 1 3.750.75 Impedance (k) 10 22max. Lot No. (24) 30max. 133Y3R0 802Y4R0 4 1 4 2 3 602Y5R0 1 0.1 Weight: 32g typ. Recommended hole diameter: od+0.5 Dimensions in mm 0.01 0.01 Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF3022H-A 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. ()max. TF3022H-A133Y3R0-01 13 0.1 TF3022H-A802Y4R0-01 8 0.07 TF3022H-A602Y5R0-01 6 0.05 TF3022H-A502Y6R0-01 5 0.04 TF3022H-A402Y7R0-01 4 0.035 TF3022H-A252Y8R0-01 2.5 0.025 TF3022H-A172Y10R0-01 1.7 0.015 TF3022H-A701Y15R0-01 0.7 0.007 TF3022H-A351Y20R0-01 0.35 0.005 502Y6R0 402Y7R0 252Y8R0 172Y10R0 701Y15R0 351Y20R0 od (mm) 0.75 0.8 0.9 0.95 1 1.1 1.3 1.6 1.7 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. 320pieces/box * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (6/13) TF3526H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 35max. (11) 2 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 3 100 203Y3R0 123Y4R0 (28) 33max. 103Y5R0 26max. 1 Impedance (k) Lot No. 10 4 1 2 4 1 702Y6R0 602Y7R0 452Y8R0 0.1 3 302Y10R 102Y15R 3.750.75 651Y20R0 Weight: 42g typ. Recommended hole diameter: od+0.5 Dimensions in mm Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF3526H-A 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. (m)max. TF3526H-A203Y3R0-01 20 130 TF3526H-A123Y4R0-01 12 75 TF3526H-A103Y5R0-01 10 55 TF3526H-A702Y6R0-01 7 45 TF3526H-A602Y7R0-01 6 35 TF3526H-A452Y8R0-01 4.5 25 TF3526H-A302Y10R0-01 3 18 TF3526H-A102Y15R0-01 1 6 TF3526H-A651Y20R0-01 0.65 4 0.01 0.01 od (mm) 0.75 0.85 0.95 1 1.1 1.2 1.3 1.7 1.8 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. 280pieces/box * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (7/13) Vertical Type TF Series 16max. TF1813V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 100 3.51 o0.7 A203Y0R7 A153Y1R0 13max. 18max. 1 4 2 3 1 4 2 3 10 Impedance (k) 70.5 140.5 Weight: 5g typ. Recommended hole diameter: o1.2 Dimensions in mm A652Y1R6 1 A502Y2R0 A202Y3R2 0.1 0.01 Part No. TF1813V-A203Y0R7-01 TF1813V-A153Y1R0-01 TF1813V-A652Y1R6-01 TF1813V-A502Y2R0-01 TF1813V-A202Y3R2-01 DC resistance ()max. 0.73 0.44 0.19 0.14 0.065 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF1813V-A 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (mH)min. 20 15 6.5 5 2 0.1 960pieces/box Rated current Iac(A)max. 0.7 1 1.6 2 3.2 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (8/13) TF2518V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM (10) 1 4 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS A902Y2R5 (13) 18max. 100 o25max. 2 3 27max. 3.750.75 4 1 L1 L2 2 3 Weight: 15g typ. od Recommended hole diameter: od+0.5 Dimensions in mm Impedance (k) 10 1 0.1 0.01 0.01 ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. ()max. TF2518V-A902Y2R5-01 9 0.12 TF2518V-A702Y3R0-01 7 0.095 TF2518V-A502Y4R0-01 5 0.075 TF2518V-A252Y5R0-01 2.5 0.05 TF2518V-A102Y8R0-01 1 0.025 TF2518V-A651Y10R0-01 0.65 0.02 A252Y5R0 A102Y8R0 A651Y10R0 0.1 1 Frequency (MHz) 10 100 RATINGS Rated current Iac(A)max. 2.5 3 4 5 8 10 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF2518V-A A702Y3R0 A502Y4R0 560pieces/box od (mm) 0.6 0.65 0.7 0.75 0.95 1 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (9/13) TF2721V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 1 (10) 4 3 28max. 10 Impedance (k) 2 4 1 L1 L2 2 3 Weight: 20g typ. od Recommended hole diameter: od+0.5 Dimensions in mm 1 0.1 0.01 0.01 ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. (m)max. TF2721V-A133Y2R5-01 13 130 TF2721V-A103Y3R0-01 10 90 TF2721V-A652Y4R0-01 6.5 60 TF2721V-A422Y5R0-01 4.2 40 TF2721V-A152Y8R0-01 1.5 20 TF2721V-A102Y10R0-01 1 11 103Y3R0 652Y4R0 422Y5R0 152Y8R0 102Y10R0 0.1 1 Frequency (MHz) 10 100 RATINGS Rated current Iac(A)max. 2.5 3 4 5 8 10 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF2721V-A 133Y2R5 (15) 21max. 100 o27max. 3.750.75 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 460pieces/box od (mm) 0.65 0.7 0.8 0.9 1 1.2 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (10/13) TF3020V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM (10) 4 31max. 3 10 4 1 L1 L2 2 od 133Y3R0 802Y4R0 Impedance (k) 2 o30max. 3.750.75 100 (15) 20max. 1 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 3 Weight: 30g typ. 602Y5R0 1 0.1 Recommended hole diameter: od+0.5 Dimensions in mm 0.01 0.01 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance Part No. resistance (mH)min. ()max. TF3020V-A133Y3R0-01 13 0.1 TF3020V-A802Y4R0-01 8 0.07 TF3020V-A602Y5R0-01 6 0.05 TF3020V-A502Y6R0-01 5 0.04 TF3020V-A402Y7R0-01 4 0.035 TF3020V-A252Y8R0-01 2.5 0.025 TF3020V-A172Y10R0-01 1.7 0.015 TF3020V-A701Y15R0-01 0.7 0.007 TF3020V-A351Y20R0-01 0.35 0.005 502Y6R0 402Y7R0 252Y8R0 172Y10R0 701Y15R0 351Y20R0 Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] od (mm) 0.75 0.8 0.9 0.95 1 1.1 1.3 1.6 1.7 Item Rated voltage(V) Dielectric withstanding voltage(V) Insulation resistance (M) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature1 1 2 Standard value 80 to 280 2000 100min. 45max. -20 to +120 Conditions 50Hz/60Hz Between each winding for 1 minute Between each winding for DC.500V With line resistance Including self-temperature rise -20 to +85 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) However, this product is not recognized by each regulations. PACKAGING QUANTITIES TF3020V-A 440pieces/box * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (11/13) TF3525V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 1 (18) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 4 (16) 25max. 100 203Y3R0 123Y4R0 103Y5R0 4 35max. 1 3.750.75 10 3 Impedance (k) 2 o35max. L1 L2 2 3 0.1 Recommended hole diameter: od+0.5 Dimensions in mm 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Rated current Iac(A)max. 3 4 5 6 7 8 10 15 20 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF3525V-A 302Y10R0 102Y15R0 651Y20R0 0.01 0.01 DC Inductance Part No. resistance (mH)min. (m)max. TF3525V-A203Y3R0-01 20 130 TF3525V-A123Y4R0-01 12 75 TF3525V-A103Y5R0-01 10 55 TF3525V-A702Y6R0-01 7 45 TF3525V-A602Y7R0-01 6 35 TF3525V-A452Y8R0-01 4.5 25 TF3525V-A302Y10R0-01 3 18 TF3525V-A102Y15R0-01 1 6 TF3525V-A651Y20R0-01 0.65 4 702Y6R0 602Y7R0 452Y8R0 Weight: 41g typ. od 1 od (mm) 0.75 0.85 0.95 1 1.1 1.2 1.3 1.7 1.8 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. 240pieces/box * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (12/13) Vertical Type (For High Frequency) TF Series FEATURES * This series is designed to reduce stray capacity between windings by using a single-layer coil construction on Ni-Zn ferrite cores, which offer excellent high frequency characteristics. * This series provides excellent noise suppression for high frequency ranges including the FM band. TF2628V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM (10) 1 4 (15) 21max. 10 2 3 4 1 28max. 1 Impedance (k) o27max. L1 L2 2 3 Weight: 18g typ. 51 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS od Recommended hole diameter: od+0.5 Dimensions in mm 0.01 0.001 0.01 Part No. TF2628V-650Y6R0-1H TF2628V-450Y9R0-1H TF2628V-250Y12R0-1H Rated current Iac(A)max. 6 9 12 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz] PACKAGING QUANTITIES TF2628V-1H 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) DC Inductance resistance (H)min. (m)max. 65 20 45 12 25 9 650Y6R0 450Y9R0 250Y12R0 0.1 700pieces/box od (mm) 0.8 1 1.2 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm (13/13) TF3524V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 1 (18) 4 (16) 25max. 10 4 1 35max. 1 3 Impedance (k) 2 o35max. TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS L1 L2 2 3 51 Weight: 40g typ. od 0.01 Recommended hole diameter: od+0.5 Dimensions in mm 0.001 0.01 Part No. Inductance (H)min. TF3524V-121Y8R0-1H TF3524V-750Y12R0-1H TF3524V-450Y15R0-1H TF3524V-250Y20R0-1H 120 75 45 25 DC resistance (m)max. 20 10 7 5 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Rated current Iac(A)max. 8 12 15 20 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz] PACKAGING QUANTITIES TF3524V-1H 121Y8R0 750Y12R0 450Y15R0 250Y20R0 0.1 320pieces/box od (mm) 1 1.3 1.6 1.8 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering tenperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-03 / 20061027 / e93_tf.fm