For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 1
HMC666LP4 / 666LP4E
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
v02.1010
General Description
Features
Functional Diagram
Electrical Specications,
TA = +25° C, IF= 300 MHz, LO= 0 dBm, Vcc=Vcc1, 2, 3 = +5V, G_Bias= +2.5V
Typical Applications
Parameter Min. Typ. Max. Units
Frequency Range, RF 3.1 - 3.9 GHz
Frequency Range, LO 2.8 - 3.6 GHz
Frequency Range, IF DC - 800 MHz
Conversion Loss 9 12 dB
Noise Figure (SSB) 9 dB
LO to RF Isolation 21 27 dB
LO to IF Isolation 22 29 dB
RF to IF Isolation 34 42 dB
IP3 (Input) 31 dBm
1 dB Compression (Input) 23 dBm
LO Drive Input Level (Typical) -3 to +3 dBm
Supply Current Icc total 162 195 mA
* Unless otherwise noted all measurements performed as downconverter with low side LO & IF = 300 MHz.
The HMC666LP4(E) is Ideal for:
• WiMAX/4G & Fixed Wireless
• Infrastructure & Repeaters
• Transmitters & Receivers
• Test & Measurement Equipment
The HMC666LP4(E) is a high dynamic range
passive MMIC mixer with integrated LO amplier
in a 4x4 SMT QFN package covering 3.1 - 3.9
GHz. Excellent input IP3 performance of +31
dBm for down conversion is provided for WiMAX
and xed wireless applications at an LO drive of
0 dBm. The LO port is optimized for low side LO
applications. With an input 1 dB compression of +23
dBm, the RF port will accept a wide range of input
signal levels. Conversion loss is 9 dB typical. The
DC to 800 MHz IF frequency response will satisfy
WiMAX transmit or receive frequency plans. The
HMC666LP4(E) is pin for pin compatible with the
HMC688LP4(E) which is a 2.0 - 2.7 GHz mixer with
LO amplier.
High Input IP3: +31 dBm
Low Conversion Loss: 9 dB
Low LO Drive: 0 dBm
Upconversion & Downconversion Applications
Optimized for low side LO input
24 Lead 4x4mm SMT Package: 16mm2
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 2
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Conversion Gain vs. Temperature Isolation
Return LossConversion Gain vs. LO Drive
IF Bandwidth (LO= 3.2 GHz) Input P1dB vs. Temperature
-20
-15
-10
-5
0
3 3.2 3.4 3.6 3.8 4
+25 C
+85 C
-40 C
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
3 3.2 3.4 3.6 3.8 4
-3 dBm
0 dBm
+3 dBm
+6 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-35
-30
-25
-20
-15
-10
-5
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
IF RL
CG
RESPONSE (dB)
FREQUENCY (GHz)
10
15
20
25
30
3 3.2 3.4 3.6 3.8 4
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
3 3.2 3.4 3.6 3.8 4
RF
LO
RETURN LOSS (dB)
FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
3 3.2 3.4 3.6 3.8 4
LO/IF
RF/IF
LO/RF
ISOLATION (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 3
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
[1] Two-tone input power = +10 dBm each tone, 1 MHz spacing. [2] Referenced to RF Input Power at 0 dBm.
Input IP3 vs. Temperature [1]
+2RF -2LO Response vs. LO Drive [2]
Input IP3 vs. LO Drive [1]
+2RF -2LO Response vs. Temperature [2]
+3RF -3LO Response vs. LO Drive [2]
+3RF -3LO Response vs. Temperature [2]
20
24
28
32
36
40
3 3.2 3.4 3.6 3.8 4
-3 dBm
0 dBm
+3 dBm
+6 dBm
IP3 (dBm)
FREQUENCY (GHz)
60
65
70
75
80
85
3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
-3 dBm
0 dBm
+3 dBm
+6 dBm
RESPONSE (dBc)
FREQUENCY (GHz)
60
65
70
75
80
85
3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
+25 C
+85 C
-40 C
RESPONSE (dBc)
FREQUENCY (GHz)
40
50
60
70
80
90
3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
-3 dBm
0 dBm
+3 dBm
+6 dBm
RESPONSE (dBc)
FREQUENCY (GHz)
40
50
60
70
80
90
3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
+25 C
+85 C
-40 C
RESPONSE (dBc)
FREQUENCY (GHz)
20
25
30
35
40
3 3.2 3.4 3.6 3.8 4
+25 C
+85 C
-40 C
IP3 (dBm)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 4
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Harmonics of LO
MxN Spurious @ IF Port
nLO
mRF 0 1 2 3 4
0 xx 22 31 35 51
1 35 0 44 35 69
2 85 69 57 68 81
3 105 85 91 67 85
4 120 120 120 113 108
RF Freq. = 3.5 GHz @ 0 dBm
LO Freq. = 3.2 GHz @ 0 dBm
All values in dBc below IF power level (1RF - 1LO).
nLO Spur @ RF Port
LO Freq. (GHz) 1 2 3 4
2.7 31 33 46 55
2.8 30 30 46 60
2.9 28 30 47 59
3.0 28 29 48 55
3.1 27 28 48 53
3.2 27 29 48 70
3.3 27 30 51 58
3.4 28 31 56 52
3.5 28 33 55 48
3.6 29 34 57 45
3.7 30 35 58 46
LO = 0 dBm
All values in dBc below input LO level measured at RF port.
Typical Supply Current vs. Vcc
Vcc1, 2, 3 (V) Icc total (mA)
4.75 149
5.00 162
5.25 174
Downconverter will operate over full voltage range shown above.
Absolute Maximum Ratings
RF / IF Input (Vcc1, 2, 3 = +5V) +23 dBm
LO Drive (Vcc1, 2, 3 = +5V) +10 dBm
Vcc1, 2, 3 5.5V
Channel Temperature 125 °C
Continuous Pdiss (T = 85°C)
(derate 36.23 mW/°C above 85°C) 1.45 W
Thermal Resistance
(channel to ground paddle) 27.6 °C/W
Storage Temperature -65 to 150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Upconverter Performance
Conversion Gain vs. LO Drive
Upconverter Performance
Input IP3 vs. LO Drive [1]
16
20
24
28
32
36
3 3.2 3.4 3.6 3.8 4
-3 dBm
0 dBm
+3 dBm
+6 dBm
IP3 (dBm)
FREQUENCY (GHz)
-20
-15
-10
-5
0
3 3.2 3.4 3.6 3.8 4
-3 dBm
0 dBm
+3 dBm
+6 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 5
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC666LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H666
XXXX
HMC666LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H666
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 6
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Pin Number Function Description Interface Schematic
1, 6, 7, 11 - 14,
18, 20, 23 N/C No connection. These pins may be connected to RF
ground. Performance will not be affected.
2, 5, 15, 17 GND Package bottom must be
connected to RF/DC ground.
3 RF This pin is matched single-ended 50 Ohm and DC
shorted to ground through a balun.
4 TAP Short to ground with a zero ohm resistor
close to the IC.
8, 10, 24 Vcc1, Vcc2,
Vcc3
Power supply voltage. See application circuit
for required external components.
9 LO_BIAS
Adjust the LO buffer current through an external
resistor. See application circuit for required external
components.
16 LO This pin is matched single-ended 50 Ohm and DC
shorted to ground through a balun.
19 G_BIAS
External optional bias. See application circuit
for required external components. Apply +2.5V for
nominal performance.
21, 22 IFN, IFP
Differential IF input / output pins matched to differential
50 Ohms. For applications not requiring operation to
DC an off chip DC blocking capacitor should be used.
Pin Descriptions
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 7
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
Item Description
J1 - J3 SMA Connector
J4 - J7 DC Pin
C19 22 pF Capacitor, 0402 Pkg.
C7, C8 10 nF Capacitor, 0402 Pkg.
C10, C12, C16, C18 1 nF Capacitor, 0402 Pkg.
C11, C15, C17, C21 0.1 µF Capacitor, 0402 Pkg.
C1 0.4 pF Capacitor, 0402 Pkg.
C20 4.7 µF Case A, Tantalum
L1 2.2 nH Inductor, 0402 Pkg.
R1 - R4 0 Ohm Resistor, 0402 Pkg.
R9 200 Ohm Resistor, 0603 Pkg.
T1 1:1 Transformer - Tyco MABACT0039
U1 HMC666LP4(E) Double Balanced Mixer
PCB [2] 118162 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25R, FR4
List of Materials for Evaluation PCB 120818 [1]
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE BALANCED - SMT
10
10 - 8
Application Circuit
HMC666LP4 / 666LP4E
v02.1010
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 3.1 - 3.9 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D