© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL, CQC
• Class Y2 / X1 (IEC 60384-14)
• Rated voltage: 300 VAC 50/60 Hz
• Capacitance range: 0.001 – 1 µF
• Lead spacing: 10 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category: 40/110/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof−40˚Cto+110˚C
• 100% screening factory test at 5,000 VDC/2,500 VAC
• Self-healing properties
• Automotive (AEC–Q200) grades available up to
22.5 mm Lead Spacing
Overview
TheR41isconstructedofmetallizedpolypropylenelm
encapsulated with self-extinguishing resin in a box of
material meeting the requirements of UL 94 V–0.
Automotive Grade devices (up to 22.5 mm Lead Spacing)
meet the demanding Automotive Electronics Council's AEC–
Q200qualicationrequirements.
Applications
For use in electromagnetic interference (EMI) suppression
lterin"line-to-ground"and"across-the-line"applications
requiringY2/X1safetyclassication.Suitableforusein
situations where failure of the capacitor could lead to danger
ofelectricshock.Notforusein"serieswithmains"type
applications.
Metallized Polypropylene Film EMI Suppression Capacitors
R41, Class Y2, 300 VAC, 110°C
(Automotive Grade)
Part Number System
R41 3I2330 00 M1 M
Series Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF) Packaging Internal Use Capacitance
Tolerance
Y2, Metallized
Polypropylene
3 = 300 F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
signicantgures.
Therstdigit
speciesnumber
of zeros to be
added.
See Ordering
Options Table
00
M1
K = ±10%
M = ±20%
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 2
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging Code
10,
15,
22.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
00
Ammo Pack
H0= 18.5 ±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 ±0.5 CK
Bulk (Bag) – Short Leads 3.5+0.5/−0JB
Bulk (Bag) – Short Leads 4.0+0.5/−0JE
Bulk (Bag) – Short Leads 3.2+0.3/−0.2 JH
Bulk (Bag) – Long Leads 18 ±1 JM
Bulk (Bag) – Long Leads 30+5/−040
Bulk (Bag) – Long Leads 25+2/−150
27.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
00
Tape & Reel (Large Reel)
H0= 18.5 ±0.5
CK
Other Lead and Packaging Options
Bulk (Bag) – Long Leads
30+5/−0
40
Bulk (Bag) – Long Leads
25+2/−1
50
37.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
00
Other Lead and Packaging Options
Bulk (Bag) – Long Leads
30+5/−0
40
Bulk (Bag) – Long Leads
25+2/−1
50
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 3
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Dimensions – Millimeters
H
p
LL
d
L B
FRONT VIEW SIDE VIEW
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
±0.4
4.0
+0.2
9.0
+0.1
13.0
+0.2
0.6
±0.05
10.0
±0.4
5.0
+0.2
11.0
+0.1
13.0
+0.2
0.6
±0.05
10.0
±0.4
6.0
+0.2
12.0
+0.1
13.0
+0.2
0.6
±0.05
15.0
±0.4
5.0
+0.2
11.0
+0.1
18.0
+0.3
0.6
±0.05
15.0
±0.4
6.0
+0.2
12.0
+0.1
18.0
+0.3
0.6
±0.05
15.0
±0.4
7.5
+0.2
13.5
+0.1
18.0
+0.5
0.6
±0.05
15.0
±0.4
8.5
+0.2
14.5
+0.1
18.0
+0.5
0.6
±0.05
15.0
±0.4
11.0
+0.2
19.0
+0.1
18.0
+0.5
0.8
±0.05
22.5
±0.4
6.0
+0.2
15.0
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
7.0
+0.2
16.0
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
8.5
+0.2
17.0
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
10.0
+0.2
18.5
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
13.0
+0.2
22.0
+0.1
26.5
+0.3
0.8
±0.05
27.5
±0.4
13.0
+0.2
22.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
14.0
+0.2
28.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
18.0
+0.2
33.0
+0.1
32.0
+0.3
0.8
±0.05
37.5
±0.4
13.0
+0.3
24.0
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
16.0
+0.3
28.5
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
20.0
+0.3
40.0
+0.1
41.5
+0.3
1.0
±0.05
Note: See Ordering Options Table for lead length (LL/H0) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 4
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Performance Characteristics
−40 −20 0
0
10
20
30
40
50
60
70
80
90
100
20
Temperature (ºC)
Maximum Humidity in Storage Conditions
40 60 80
30 Days
Annual Average
Dielectric Polypropylenelm
Plates Metal layer deposited by evaporation under vacuum
Winding Non-inductive type
Leads Tinned wire
Protection Plasticcase,thermosettingresinlled.BoxmaterialissolventresistantandameretardantaccordingtoUL94.
Related documents IEC 60384-14, EN 60384-14
Rated Voltage (VR) 300 VAC (50/60 Hz), 1,000 VDC
Capacitance Range 0.0010 to 1 µF
Capacitance Values E6 series (IEC 60063)
Capacitance Tolerance ±10%, ±20%
Temperature Range −40°Cto+110°C
Climatic Category 40/110/56 IEC 60068-1
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthelabelpackage
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dew is absent
Temperature:−40to80°C(see"MaximumHumidityinStorageConditions"graphbelow)
Approvals ENEC, UL, cUL, CQC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 5
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Performance Characteristics cont'd
* Typical value
Qualication
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regardingtestmethodsandconditionsarereferencedindocumentAEC–Q200,StressTestQualicationforPassive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
Impedance Graph
DissipationFactor(tanδ) ≤0.3%(0.2%*)at1kHz,+25°C±5°C(*typicalvalue)
Test Voltage Between Terminals
The 100% screening factory test is carried out at 5,000 VDC/2,500 VAC. The voltage level is selected to meet
the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such
case for any failures.
Insulation Resistance
Measuredat+25°C±5°C,accordingtoIEC60384–2
Minimum Values Between Terminals
Voltage Charge Voltage Charge Time C≤0.33μF C>0.33μF
100 VDC 1 min
≥1•105MΩ
(≥5•10
5
MΩ)*
≥30,000MΩ•µF
(≥150,000MΩ•µF)*
In DC Applications Recommendedvoltage≤1,000VDC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 6
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Environmental Test Data
Test IEC Publication Procedure
Endurance EN/IEC 60384–14
1.7 x V
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR+20surgepulsesat5kV(pulseevery5seconds)
Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needleametest
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°Cand93%RH,56days
Approvals
Mark Specication File Number
EN/IEC 60384-14 V4160
UL 60384-14 and
CAN/CSA E60384-14
(300 VAC)
E97797
IEC 60384-14
CQC13001087758
CQC13001101264
CQC14001116018
CQC14001116611
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 7
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Dimensions in mm Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
B H L
0.0010 4.0 9.0 13.0 10.0 800 413F1100(1)00(2) R413F1100(1)00(2)
0.0015 4.0 9.0 13.0 10.0 800 413F1150(1)00(2) R413F1150(1)00(2)
0.0022 4.0 9.0 13.0 10.0 800 413F1220(1)00(2) R413F1220(1)00(2)
0.0033 4.0 9.0 13.0 10.0 800 413F1330(1)M1(2) R413F1330(1)M1(2)
0.0047 5.0 11.0 13.0 10.0 800 413F1470(1)M1(2) R413F1470(1)M1(2)
0.0068 6.0 12.0 13.0 10.0 800 413F1680(1)00(3) R413F1680(1)00(3)
0.010 6.0 12.0 13.0 10.0 800 413F2100(1)M1(3) R413F2100(1)M1(3)
0.0033 5.0 11.0 18.0 15.0 600 413I1330(1)00(2) R413I1330(1)00(2)
0.0047 5.0 11.0 18.0 15.0 600 413I1470(1)00(2) R413I1470(1)00(2)
0.0068 5.0 11.0 18.0 15.0 600 413I1680(1)00(2) R413I1680(1)00(2)
0.010 5.0 11.0 18.0 15.0 600 413I2100(1)00(2) R413I2100(1)00(2)
0.015 5.0 11.0 18.0 15.0 600 413I2150(1)M1(2) R413I2150(1)M1(2)
0.022 6.0 12.0 18.0 15.0 600 413I2220(1)M1(2) R413I2220(1)M1(2)
0.033 7.5 13.5 18.0 15.0 600 413I2330(1)M1(2) R413I2330(1)M1(2)
0.047 8.5 14.5 18.0 15.0 600 413I2470(1)M1(2) R413I2470(1)M1(2)
0.068 11.0 19.0 18.0 15.0 600 413I2680(1)00(2) R413I2680(1)00(2)
0.047 6.0 15.0 26.5 22.5 500 413N2470(1)00(2) R413N2470(1)00(2)
0.068 6.0 15.0 26.5 22.5 500 413N2680(1)M1(3) R413N2680(1)M1(3)
0.068 7.0 16.0 26.5 22.5 500 413N2680(1)00(2) R413N2680(1)00(2)
0.10 8.5 17.0 26.5 22.5 500 413N3100(1)M1(2) R413N3100(1)M1(2)
0.15 10.0 18.5 26.5 22.5 500 413N3150(1)M1(2) R413N3150(1)M1(2)
0.22 13.0 22.0 26.5 22.5 500 413N3220(1)00(2) R413N3220(1)00(2)
0.22 13.0 22.0 32.0 27.5 400 413R3220(1)00(2) R413R3220(1)00(2)
0.33 14.0 28.0 32.0 27.5 400 413R3330(1)00(2) R413R3330(1)00(2)
0.47 18.0 33.0 32.0 27.5 400 413R3470(1)00(2) R413R3470(1)00(2)
0.68 18.0 33.0 32.0 27.5 400 413R3680(1)00(2) R413R3680(1)00(2)
0.47 13.0 24.0 41.5 37.5 300 413W 3470(1)00(2) R413W 3470(1)00(2)
0.68 16.0 28.5 41.5 37.5 300 413W 3680(1)00(2) R413W 3680(1)00(2)
1.0 20.0 40.0 41.5 37.5 300 413W 4100(1)00(2) R413W 4100(1)00(2)
Capacitance Value (µF) B (mm) H (mm) L (mm) Lead
Spacing (p) dV/dt (V/µs) New KEMET
Part Number Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
(3) M = ±20% (only available tolerance).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 8
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Manual Soldering Recommendations
The following is the recommendation for
manual soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering time (seconds)
Soldering iron bit temperature (°C)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
Thishasincreasedtheliquidustemperaturefromthatof183°CforSnPbeutecticalloyto217–221°Cforthenewalloys.Asa
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures.Polypropylenecapacitorsareespeciallysensitivetoheat(themeltingpointofpolypropyleneis160–170°C).Wave
soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Pleaseconsult
KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline
for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/second
ca 3.5°C/second typical
ca 5°C/second
Cooling
2 +3 seconds maximum
115 °C max
T
preheat
∆T <150°C
100 °C
Preheating
Typical
First wave
Second wave
260°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 9
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 10
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Molded Plastic
Case
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Margin
2 Sections
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 11
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Marking
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 10 mm
Manufacturer’s
Logo
Manufacturing
Plant
IEC Climatic
Category
Approval
Marks
TOPFRONT
Series
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
Manufacturer’s
Logo
Dielectric
Code Safety
Class Self
Healing
Passive
Flammability
Category Date Code
QA Number
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 15 mm, 22.5 mm (small case sizes)
Manufacturer’s
Logo
Passive Flammability
Category
Manufacturing
Plant
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 12
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Marking cont'd
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 10 mm
Manufacturer’s
Logo
Manufacturing
Plant
IEC Climatic
Category
Approval
Marks
TOPFRONT
Series
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
Manufacturer’s
Logo
Dielectric
Code Safety
Class Self
Healing
Passive
Flammability
Category Date Code
QA Number
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 15 mm, 22.5 mm (small case sizes)
Manufacturer’s
Logo
Passive Flammability
Category
Manufacturing
Plant
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
Manufacturing Date Code (IEC 60062)
Y = Year, Z = Month
Year Code Month Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020 M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 13
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
10
4.0
9.0
13.0
2000
1800
750
1500
1000
5.0
11.0
13.0
1300
1500
600
1250
800
6.0
12.0
13.0
1000
1200
500
1000
680
15
5.0
11.0
18.0
2000
1000
600
1250
800
6.0
12.0
18.0
1750
900
500
1000
680
7.5
13.5
18.0
1000
700
350
800
500
8.5
14.5
18.0
1000
500
300
700
440
11.0
19.0
18.0
450
350
–
500
340
22.5
6.0
15.0
26.5
805
500
–
700
464
7.0
16.0
26.5
700
500
–
550
380
8.5
17.0
26.5
468
300
–
450
280
10.0
18.5
26.5
396
300
–
350
235
13.0
22.0
26.5
300
200
–
300
–
27.5
13.0
22.0
32.0
480
288
–
300
–
14.0
28.0
32.0
352
176
–
–
–
18.0
33.0
32.0
256
128
–
–
–
37.5
13.0
24.0
41.5
360
216
–
–
–
16.0
28.5
41.5
216
108
–
–
–
20.0
40.0
41.5
126
84
–
–
–
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 14
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Description Symbol
Dimensions (mm)
Lead Space
Tol.
10
15
22.5
27.5
Fig. 1
Fig. 2
Fig. 3
Fig. 3
Lead wire diameter d 0.6 0.6-0.8 0.8 0.8 ±0.05
Taping lead space P25.4 25.4 38.1 38.1 ±1
Feedholeleadspace* P
0
12.7 12.7 12.7 12.7 ±0.2**
Centering of the lead wire P
1
7.7 5.2 7.8 5.3 ±0.7
Centering of the body P
2
12.7 12.7 19.05 19.05 ±1.3
Leadspacing(pitch)*** F10 15 22.5 27.5 +0.6/−0.1
Component alignment ∆h 0000±2
Height of component
from tape center H0**** 18.5 18.5 18.5 18.5 ±0.5
Carrier tape width W18 18 18 18 +1/−0.5
Hold down tape width W
0
910 10 10 Minimum
Hole position W
1
9999±0.5
Hold down tape position W
2
3333Maximum
Feed hole diameter D
0
4444±0.2
Total tape thickness t0.7 0.7 0.7 0.7 ±0.2
* Available also in 15 mm.
** Maximum 1 mm on 20 lead spaces.
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.
**** H0 = 16.5 mm available upon request.
P
P2
P0
F
H0
W
h
P1D0
W2
W1
W0
h
ød
P
P2
P1
Figure 1
Lead Spacing 10 mm
Figure 2
Lead Spacing 15 mm
Figure 3
Lead Spacing 22.5 – 27.5 mm
t
A-B
A B
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 15
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Dimensions (mm)
H W T
360 340 59
Reel Speci cations
Reel Size Dimensions (mm)
D H W
Standard
355
30
55 Maximum
Large
500
25
D
W
H
H
T
W
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3100_R41_Y2_300 • 10/16/2017 16
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryor
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.