PRODUCT DATASHEET
Rocket-(sputnik) series
Ordering number
Description
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
CA10325
CA10325_Rocket-O
Rocket-(sputnik)
Lens
XR-E
Transparent
26 mm
15.1 mm
Round
PMMA
-
Tape
Ready
FWHM
Efficiency
cd/lm
Gerber File
6+40 degrees
86 %
-
Available
Ordering number
Description
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
CA10324
CA10324_Rocket-SS
Rocket-(sputnik)
Lens
XR-E
Transparent
26 mm
15.1 mm
Round
PMMA
-
Tape
Ready
FWHM
Efficiency
cd/lm
Gerber File
8 degrees
89 %
-
Available
Ordering number
Description
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
CA10540
CA10540_Rocket-O_MetalPlated
Rocket-(sputnik)
Lens
XR-E
Metal
26 mm
15.1 mm
Round
PMMA
-
Tape
Ready
FWHM
Efficiency
cd/lm
Gerber File
8+34 degrees
-
-
Available
Ordering number
Description
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
CA10541
CA10541_Rocket-SS_MetalPlated
Rocket-(sputnik)
Lens
XR-E
Metal
26 mm
15.1 mm
Round
PMMA
-
Tape
Ready
FWHM
Efficiency
cd/lm
Gerber File
10 degrees
-
-
Available
February 12th 2012 13:33 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Rocket-(sputnik) series
Ordering number
Description
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
CA10250
CA10250_Rocket-M
Rocket-(sputnik)
Lens
XR-E
Transparent
26 mm
15.1 mm
Round
PMMA
-
Tape
Ready
FWHM
Efficiency
cd/lm
Gerber File
26 degrees
87 %
-
Available
Ordering number
Description
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
CA10406
CA10406_Rocket-W
Rocket-(sputnik)
Lens
XR-E
Transparent
26 mm
15.1 mm
Round
PMMA
-
Tape
Ready
FWHM
Efficiency
cd/lm
Gerber File
38 degrees
76 %
-
Available
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
February 12th 2012 13:33 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Rocket-(sputnik) series
GENERAL INFORMATION
- Product series especially designed & optimized for XR-E series of LEDs.
- Special care taken to make light distribution as uniform as possible.
- Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220
degrees of Fahrenheit). Allows use of high current and temperature conditions.
Please find more information about used material from below:
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf
- Fastening to heat sink with a PU foam adhesive tape of automotive grade. Please find fastening details by
clicking link: http://www.ledil.com/datasheets/DataSheet_TAPE.pdf
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end
product. For example, mechanical stress, vibration and holes on the surface of the circuit boar
weaken the strength of the tape.
NOTE 2: Assembly to the surface must be made straight, so the tape bonds constant and
balanced with fastening surface. Slanted assembly might cause unbalanced bond to the
surface. All surfaces where tape is applied must be clean, dry and free from grease and dirt.
If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your
LED manufacturer - this is important as cleaning shall under no circumstances damage LEDs or
other electronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fiber
cloth may be used to remove fingerprints or other traces from handling.
February 12th 2012 13:33 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001