Kinetis KL02 Family Options
For current information about Kinetis products and documentation,
please visit freescale.com/Kinetis/KL02CSP
Freescale, the Freescale logo, CodeWarrior, the Energy Efficient Solutions logo, Kinetis and Processor Expert are trademarks
of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their
respective owners. ARM, ARM Powered, Cortex and Keil are registered trademarks of ARM Limited (or its subsidiaries) in the
EU and/or elsewhere. All rights reserved. © 2012–2014 Freescale Semiconductor, Inc.
Doc Number: KINETISKL02CSPFS REV 4
Features
Ultra Low Power
• Next-generation 32-bit Cortex-M0+ core.
2x more CoreMark/mA than the closest
8/16-bit architecture
• Multiple, flexible, low-power modes,
including new compute mode that reduces
dynamic power by placing peripherals in an
asynchronous stop mode
• LPUART, SPI, I2C, ADC, DAC, LP timer and
DMA support low power mode operation
without waking up the core
Flash and SRAM
• 32 KB flash, 4 KB RAM
• Security circuitry to prevent unauthorized
access to RAM and flash contents
Performance
• Cortex-M0+ core, 48 MHz core frequency
over full voltage and temperature range
(–40 ˚C to +105 ˚C). Single-cycle fast I/O
access port facilitates bit banging and
software protocol emulation, maintaining an
8-bit “look and feel”
• Bit manipulation engine for improved bit
handling of peripheral modules
• Thumb instruction set combines high code
density with 32-bit performance
• Independently clocked COP guards against
clock skew or code runaway for fail-safe
applications
Mixed Signal
• 12-bit ADC with configurable resolution,
sample time and conversion speed/power
• Integrated temperature sensor
• High-speed comparator with internal 6-bit
DAC
Timing and Control
• Two 2-ch., 16-bit low-power timer PWM
modules
• Low-power timer allows operation in all
power modes except VLLS0
HMI
• Up to 28 controllable GPIO with pin
interrupt support
Connectivity and Communications
• I2C, up to 400 Kb/s and compatible with
SMBus V2 features
• LPUART and SPI
Software and Tools
• CodeWarrior for MCUs V10.x (Eclipse)
IDE with Processor Expert software
configuration tool
• IAR Embedded Workbench®, ARM Keil®
MDK, Atollic, GCC
• MQX™ Lite, FreeRTOS
• Full ARM ecosystem support
Freescale Freedom Development Platform
The Freescale Freedom development platform
is a small, low-power, cost-effective evaluation
and development tool perfect for quick
application prototyping and demonstration of
Kinetis MCU families. The platform offers an
easy-to-use mass-storage device mode flash
programmer, a virtual serial port and classic
programming and run control capabilities.
• Low cost (<$20 USD MSRP)
• Designed in an industry-standard compact
form factor
• Easy access to the MCU I/O pins
• Integrated open standard serial and debug
interface (OpenSDA)
• Compatible with a rich set of third-party
expansion boards
Learn more at freescale.com/Freedom.
Sub-
Family Part Number
CPU (MHz)
Memory Features √ Package
Flash (KB)
SRAM (KB)
DMA
UART
SPI
I2C
TSI
I2S
RTC
12-bit DAC
16-bit ADC w/DP ch.
12-bit ADC
Total I/Os
Other
FG AF FK FM
16 QFN
(3 x 3, 0.5 mm)
20 WLCSP
(1.9 x 2, 0.4 mm)
24 QFN
(4 x 4, 0.5 mm)
32 QFN
(5 x 5, 0.5 mm)
KL02
MKL02Z8xxx4 48 MHz 8 1 1 1 2 √14~28 √
MKL02Z16xxx4 48 MHz 16 2 1 1 2 √14~28 √ √ √
MKL02Z32xxx4 48 MHz 32 4 1 1 2 √14~28 √ √ √ √