THIRD ANGLE PROJ.
REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE:
6 - 30mm
0.5 - 6mm 30 - 120mm ANGLES
<0.5mm
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell
any product, process or design, patented or otherwise, that may in any way be
related to or disclosed by said drawings, specifications, or other data.
EAR#
REF:
AREA "A"
1.50 MAX.
[0.059]
FROM BODY TO HST
REF7,50
0.295[ ]
3,25
0.128[ ]
1,20
0.047[ ]
5,33
0.210[ ]
REF
TYP(2)
4,60
0.181[ ]
REF
14,56
0.573[ ]
REF
19,06
0.750[ ]
x45$0,20
0.008[ ]
CENTER CONDUCTOR
3,80
0.150[ ]
DIELECTRIC & FOIL
6,60
0.260[ ]
BRAID
8,15
0.321[ ]
REVISIONS
REV DESCRIPTION DATE ECN APPR
A RELEASE TO MFG. 17-Oct-19 13304 SKP
901-10661
PART NO.
901-10661
ITEM NO.
901-10661
DRAWING NO.
Amphenol RF
www.amphenolrf.com
AB
SHEET 2 OF 2SCALE: 5.4:1.0
SMA RA PLUG IP 67
FOR LMR 200 CABLE
TITLE
CAD FILE
17-Oct-19K.CAPOZZI
DATE APPROVED
06-Feb-19VIJAY N M
DATE ENGINEER
06-Feb-19
VIJAY N M
DATE DRAWN
FINISH
CONFIGURATION LEVEL: In Work
901-10580
8898
REFERENCE
SEE NOTES
MATERIAL
NOTES:
1. MATERIALS AND FINISHES:
BODY, BODY-REAR,
& COUPLING NUT - BRASS, NICKEL PLATING
INSULATOR - PTFE, NATURAL
INSULATOR DISC - ULTEM, NATURAL
CONTACT - BRASS, GOLD PLATING
FERRULE - COPPER, NICKEL PLATING
RETAINING RING - STAINLESS STEEL, NATURAL
CAP - STAINLESS STEEL, PASSIVATED
GASKET & O-RINGS - SILICONE RUBBER, RED
HEAT SHRINK TUBE - CROSSLINKED POLYOLEFIN, BLACK
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
B. FREQUENCY RANGE: DC - 8 GHz
C. VSWR: 1.20 MAX.
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE : -65°C TO +165°C
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED.
"AMPHENOL RF, 901-10661 AND DATE CODE"
5. CABLE ASSEMBLY INSTRUCTIONS:
A. TRIM CABLE AS SHOWN.
B. SLIDE HEAT SHRINK TUBING, FERRULE AND INSULATOR DISC ONTO CABLE.
C. INSERT CABLE, UNTIL IT BOTTOMS, WITH FOIL ENTERING CONNECTOR
AND BRAID OVER KNURL.
D. SOLDER CABLE CENTER CONDUCTOR TO CONTACT.
E. CRIMP FERRULE OVER BRAID WITH 0.213" HEX DIE.
F. APPLY HEAT SHRINK TUBING OVER FERRULE.
G. HEAT SHRINK TUBING SHOULD FULLY (360$) COVER THE BUMP ON BODY
AND END WITHIN AREA "A".
6. CAP ASSEMBLY INSTRUCTIONS:
A. PLACE O-RING ON CAP AS SHOWN.
B. ASSEMBLE CAP TO BODY WITH 5 IN-LBS MAX TORQUE.
7. ADHESIVE LINED HEAT SHRINK TUBE IS INCLUDED (NOT SHOWN).
8. SHOWS CABLE ENTRY DIMENSIONS.
SCALE 1.700
INTERFACE PER
MIL-STD-348
SERIES: SMA PLUG
CAP
INSULATOR DISC FERRULE
8.00 MM WRENCH
O-RING
7.20 MM WRENCH
M4xP0.7-6g THREAD
RECOMMENDED CABLE
STRIPPING DIMENSIONS
CUSTOMER OUTLINE DRAWING
ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY
888
