Serial Device Server 6SHFLFDWLRQ Network Interface Ethernet: 1 x 10/100 Base TX Connector: RJ-45 Feature: Auto MDI/MDI-X, 10/100M Auto-Negotiation Protection: Built-in 1.5 KV magnetic isolation protection Protocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, Telnet, SNMP, HTTP, SNTP, SMTP Serial Communication Number of Ports: 1 Interface: RS-232 Connectors: Male DB9 Baud Rates: 110 bps to 460.8K bps Data Bits: 5, 6, 7, 8 Parity: odd, even, none Stop Bits: 1, 1.5, 2 RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD Flow Control: XON/XOFF, RTS/CTS, DTR/DSR Serial Line Protection: 15KV ESD Features JetPort 5201 1-port RS-232 Serial Device Server Includes: 1-port RS-232 Serial Device Server Quick Installation Guide 100V ~ 240V power adapter Din-Rail kit and foot pads Documentation and Software CD-ROM JetPort Commander: Device Discovery, Auto IP, Network Setting, Device and 6HULDO3RUW6HWWLQJDQGPRQLWRULQJ1RWLFDWLRQVHWWLQJ )LUPZDUH8SJUDGH&RQJXUDWLRQ%DFNXSDQG5HVWRUH *URXS&RQJXUDWLRQ:L]DUGV Serial Service Mode: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP Advanced Serial Setting: TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval time *URXS&RQJXUDWLRQ:L]DUG -HW3RUW&RPPDQGHU*URXS,3:L]DUG*URXSUPZDUH upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup Wizard Power Requirements System Power: DC Jack: 9-30VDC Power Line protection: 1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5 Mechanical Dimensions: 78.5mm(W)x79.6mm(D)x29.2mm(H) Environmental O Operating Temperature: 0 ~ 60 C Operating Humidity: 5% ~ 95%, (non-condensing) Storage Temperature: -40 ~ 85 C Warranty: 5 years O JetPort 5201 Ordering Information Windows Utility Industrial 1-port RS232 Serial Device Server LED: Power: Startup(Red); Ready(Green) Ethernet : 10M Link(Orange), 100M Link(Green) Serial: Transmitting data(Green), Receiving data(Orange) &RQJXUDWLRQWindows Utility-JetPort Commander, HTTP, Telnet Serial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP Reset: Software reload default, Hardware reset button SNTP: For time management Access IP Table: 16 IP addresses to prevent illegal users Monitor: Devices' status, VCOM status SNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap E-Mail Alert: $XWRPDWLFHPDLOZDUQLQJE\SUHGHQHG events System Log: Trap to Syslog server or local display System Events: Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected. TTY Driver: Fixed TTY driver for Linux