6100-3 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Inlet C14, Screw-on Mounting, Front or Rear Side, Solder or Quick-connect Terminal 6100-3 with sealing kit IP54 to appliance (without locking brackets) IEC connector C14 Screw-on mounting Solder or quick connect terminals 6100-3 6100-3 with sealing kit IP54 (including locking brackets) C14 See below: Approvals and Compliances 70 C Description - Panel mount : Screw-on mounting from front or rear-side - Appliance Inlet , Pin temperature 70 C , Protection class I - Variants with factory mounted inlet gasket and sealing kit for IP54 into the equipement and the pluggable power supply - Solder terminals or quick connect terminals Other versions on request - Types for rivet mounting available upon request - Types for enhanced glow wire test requirements acc. IEC 60695-212 and -13 for the use in unattended household equipment acc. IEC 60335-1 References Alternative: protection class II version 6102-3 Alternative: version with line filter 5110;5120 Weblinks pdf data sheet, html data sheet, General Product Information, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I from front side IP40 or IP54 with sealing kit acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder terminals or quick connect terminals Screw: max 8 mm, max 3 mm with sealing kit Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 6100-3 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6100 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40015595 UL Approvals UL UL File Number: E96454 CCC Approvals CCC CCC Certificate Number: Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors 6100-3 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Dimensions [mm] 6.3x90 2.5 19.5 20.5 23 3.5 28 E 27.5 5 40 48 E: Solder terminals 20.5 mm E: Quick connect terminals 23.5 mm max.R3 2) 21 +0.2 0 1) O 3.5 20 +0.2 0 O 3.5 / M3 max.R3 28 +0.2 0 28.5 +0.2 0 40 0.2 40 0.2 1) mounting from front-side 2) mounting from rear-side Assembly Instructions 6100-3 incl. sealing kit for IP54 Mating cordsets to sealing kit 5) 7) 4) 8) 6) 1) 2) 3) Part no Country plug Cable length Cross section Color 6000.0214 6003.0215 6004.0215 6007.0212 6007.0214 6004.0114 6026.0215 6009.1315 6047.6414 6009.1214 6011.0215 6044.0215 open end EURO plug EURO plug EURO plug IEC plug EURO plug Italy North America Japan North America Switzerland United Kingdom 2.0 m 2.5 m 2.5 m 1.0 m 2.0 m 2.0 m 2.5 m 2.5 m 2.0 m 2.0 m 2.5 m 2.5 m 3x1 mm2 3x1 mm2 3x1 mm2 3x1 mm2 3x1 mm2 3x0.75 mm2 3x1 mm2 3x18 AWG 3x0.75 mm2 3x18 AWG 3x1 mm2 3x1 mm2 black black black black black black black black black black black black Panel thickness max. 3 mm Tightening torque max. 0.1 Nm 1) Device plug 6100-3 with factory-fitted insertion seal 2) Flat gasket 3) Housing 4) Support bolt 5) Sealing ring 6) Spring washer 7) Nut 8) Locking bracket Connectors 3 6100-3 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 All Variants Type Protection Class Panel mounting Sealing kit Terminal IP Protection Class Front Side 6100-3 I 6100-3 I 6100-3 Order Number Screw - Quick connect terminals 4.8 x 0.8 mm IP40 6100.3200 Screw with locking bracket Quick connect terminals 4.8 x 0.8 mm IP54 6100.3200.33 I Screw without locking bracket Quick connect terminals 4.8 x 0.8 mm IP54 6100.3200.32 6100-3 I Screw - Quick connect terminals 6.3 x 0.8 mm IP40 6100.3300 6100-3 I Screw with locking bracket Quick connect terminals 6.3 x 0.8 mm IP54 6100.3300.33 6100-3 I Screw without locking bracket Quick connect terminals 6.3 x 0.8 mm IP54 6100.3300.32 6100-3 I Screw - Solder terminals 3.5 x 0.8 mm IP40 6100.3100 6100-3 I Screw with locking bracket Solder terminals 3.5 x 0.8 mm IP54 6100.3100.33 6100-3 I Screw without locking bracket Solder terminals 3.5 x 0.8 mm IP54 6100.3100.32 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER The variants IP54 (6100.xxxx.33) include the inlet with factory mounted inlet gasket and the kit for IP protection to the equipment and for the power connector incl. a cord retaining for a specific cord connector. Samples can be ordered with suffix ".H" (e.g. 6100.3100.33.H). Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered with ending ".15" (xxxx.xxxx.15). They are suitable for the use in unattended household equipment acc. IEC 60335-1. Packaging unit 50 Pcs Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0048 4311.9401 4311.9402 Cord retaining kits Cord retaining strain relief Flat head, A 4 Connectors 4700.0001 6100-3 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6100-3 Connector Overview complete 4782 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C15 4784 Connector further types to 6100-3 ... 02.03.2019 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 6100.3300.33.H