BU508AW High voltage NPN power transistor for standard definition CRT display Features State-of-the-art technology: - Diffused collector "Enhanced generation" Stable performances versus operating temperature variation Low base-drive requirement Tight hFE range at operating collector current High ruggedness TO-247 semi-insulated power package 3 2 1 TO-247 Applications Horizontal deflection output for CRT TV Switch mode power supplies for CRT TV Figure 1. Internal schematic diagram Description The BU508AW is manufactured using diffused collector in planar technology adopting new and enhanced high voltage structure for updated performance to the horizontal deflection stage. Table 1. Device summary Order code Marking Package Packaging BU508AW BU508AW TO-247 Tube August 2007 Rev 2 1/11 www.st.com 11 Content BU508AW Content 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 BU508AW 1 Electrical ratings Electrical ratings Table 2. Absolute maximum rating Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 1500 V VCEO Collector-emitter voltage (IB = 0) 700 V VEBO Collector-base voltage (IC = 0) 9 V Collector current 8 A Collector peak current (tP < 5ms) 15 A Base current 4 A 125 W IC ICM IB PTOT Total dissipation at Tc = 25C Tstg Storage temperature TJ Table 3. Symbol -65 to 150 C Max. operating junction temperature 150 Thermal data Parameter Rthj-case Thermal resistance junction-case _______________max Value Unit 1 C/W 3/11 Electrical characteristics 2 BU508AW Electrical characteristics (Tcase = 25C unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter ICES Collector cut-off current (VBE =0) IEBO Emitter cut-off current (IC =0) Collector-emitter VCEO(sus) (1) sustaining voltage (IC =0) Test conditions VCE = 1500V; VEB = 9V IC = 100mA IB = 1.6A VBE(sat) (1) Base-emitter saturation voltage IC = 4.5A IB = 2A IC = 0.1A VCE = 5V IC = 4.5A VCE = 5V IC = 4.5A IB(on) = 0.5A tf Inductive load Storage time Fall time VBE(off) = -2.7V fh = 16KHz LBB(off) = 4.5H 1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5 % Max. Unit 0.2 2 mA mA 1 mA 700 IC = 4.5A ts 4/11 TC= 125C Collector-emitter saturation voltage DC current gain Typ. VCE = 1500V VCE(sat) (1) hFE (1) Min. V 10 5 1 V 1.1 V 30 2.5 0.2 s s BU508AW 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage 5/11 Electrical characteristics Figure 8. 6/11 Output characteristics BU508AW BU508AW 2.2 Electrical characteristics Test circuits Figure 9. Power losses and inductive load switching Figure 10. Reverse biased safe operating area 7/11 Package mechanical data 3 BU508AW Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/11 BU508AW Package mechanical data TO-247 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. A 4.85 5.15 0.19 TYP. MAX. 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 0.620 0.214 18.50 0.582 0.17 0.728 oP 3.55 3.65 0.140 0.143 oR 4.50 5.50 0.177 0.216 S 5.50 0.216 9/11 Revision history 4 BU508AW Revision history Table 5. 10/11 Document revision history Date Revision Changes 02-Mar-2007 1 Initial release. 14-Aug-2007 2 Complete document, added all curves (2.1: Electrical characteristics (curves) BU508AW Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11