(1/2) 001-01 / 20030823 / e916_zug_11.fm ZUG-11, ZUG-11A Series EMC Components EMC Filters for AC Power Supply Inlet-Socket FEATURES * These IEC-type inlet sockets incorporate small, highperformance EMC filters with outstanding attenuation characteristics for both common mode and differential mode noise components. * Leakage current is maintained at less than 0.5mA * Two types of connection terminals are offered: Faston(R) #250 (ZUG-11 series, t: 0.8mm) or lug terminal (ZUG-11A series). * Effcient manufacturing makes these filters highly cost -effective. Part No. ZUG2203-11/-11A ZUG2206-11/-11A ZUG2210-11/-11A 38.1 o3.3 55.3 25 TUV VDE E62388 LR76849C R30019 19047-4730-1003 E62388 LR76849C R60055 Ground terminal 48 40 30.5 Ground terminal 5.2 25 CSA APPLICATIONS Personal computers, computer terminals, office automation equipment, digital applied devices (ECRs, electronic calculators, electronic scales, etc.), measurement devices, medical equipment, and any other devices that require a miniaturized high-performance filter. Faston (R) o3.3 UL ZUG-11A 48 40 30.5 SHAPES AND DIMENSIONS ZUG-11 SAFETY STANDARDS Lug terminal 5.2 38.1 55.3 * Case: metal, input terminal: inlet socket (EN60320) output terminal: Faston (R) #250 (-11 series, t: 0.8mm), lug terminal (-11A series) Typical dimensions for installation From back side panel From front panel o3.6 o3.6 or M3 tap 23.2 40 30 40 R3.5 31.2 R5.5 21.5 * Tighten the panel mounting M3 dia. bolt with the torque under 5.88x10 -1 N * m. Dimensions in mm * Faston(R) is a registered trademark of Tyco Electronics AMP Corp. Incorporated. * All specifications are subject to change without notice. (2/2) 001-01 / 20030823 / e916_zug_11.fm ZUG-11, ZUG-11A Series EMC Components EMC Filters for AC Power Supply Inlet-Socket ELECTRICAL CHARACTERISTICS Part No. Rated voltage Eac(V) Rated current(A) Test voltage Eac(V)[Between terminal and case] ZUG2203-11, 2203-11A 250 3 1500 ZUG2206-11, 2206-11A 250 6 1500 ZUG2210-11, 2210-11A 250 10 1500 Insulation resistance(M) [DC. 500V, 1min/between terminal and case] Leakage current(mA)[250V * 60Hz] 100min. 100min. 100min. 0.5max. 150max. -25 to +85 55 30max. 3 to 30 3 to 30 46 0.5max. 100max. -25 to +85 55 30max. 5 to 30 5 to 30 46 0.5max. 100max. -25 to +85 55 30max. 8 to 30 10 to 30 46 DC resistance(m) Operating temperature range(C)[Including self-temperature rise] With derating over(C) Temperature rise(C) Differential mode at 30dB Attenuation frequency range (MHz)[+5 to +35C] Common mode at 30dB Weight(g) TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS ZUG2203-11/-11A ZUG2206-11/-11A 80 80 Attenuation (dB) 100 Attenuation (dB) 100 60 40 Common mode 20 0 0.3 1 3 10 Frequency (MHz) Differential mode 40 Common mode 20 Differential mode 0.1 60 30 100 300 ZUG2210-11/-11A 0 0.1 0.3 1 3 10 Frequency (MHz) 30 100 300 CIRCUIT DIAGRAM 4 1 Attenuation (dB) 80 60 2 40 Differential mode 20 0 * Also available with built-in bleeder resistor. Common mode 0.1 0.3 1 3 10 Frequency (MHz) 3 Case GND 30 100 * All specifications are subject to change without notice. 300 Protective load 100