THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE:
#.015 (0,381 mm) #.005 (0,127 mm)
3 PLACE DECIMAL2 PLACE DECIMAL ANGLES
# 1$
0.738 REF
0.375 REF
0.122
0.220
1.081 REF.
0.669 REF. 0.327 REF.
0.530 REF
0.281#0.010
0.390#0.010
0.140#0.010
0.041
-- OFFICIAL ENG. RELEASE TO MFG. ------ ------
AA REDRAWN IN PRO E & ADDED COD 9/20/13 49679 KR
AB ADDED VIEW FOR WIRE HOLES 3/19/14 49912 CPM
AB
B
REFERENCE
DOR 312191-51
M39012/56-4502
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 5.0:1.09/20/13K. CAPOZZI
TITLE
SMA 90 $ PLUG CRIMP
TYPE FOR RG-400/U &
142/U CABLE
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
09-Jul-80
ENGINEER
ABR
MATERIAL
SEE NOTES
DATE
12-Aug-13
DRAWN
KARTHIK R
FINISH
DRAWING NO. 901-148-15
ITEM NO. 901-148-15
PART NO. 901-148-15
NOTES:
1. MATERIALS AND FINISHES (PLATING THICKNESS IN MICROINCHES):
BODY ASSEMBLY - BRASS, GOLD PLATING (50 MIN THICK)
CAP - BRASS, GOLD PLATING (50 MIN THICK)
LOOSE CONTACT - BeCu, GOLD PLATING (50 MIN THICK)
& ASSEMBLED CONTACT
GASKET - SILICONE RUBBER
RETAINGING RING - BeCu
COUPLING NUT - BeCu, GOLD PLATING (50 MIN THICK)
OUTER FERRULE - COPPER, GOLD PLATING (50 MIN THICK)
HEAT SHRINK TUBING - POLYOLEFIN
ASSEMBLED CONTACT - BRASS, GOLD PLATING (50 MIN THICK)
INSULATORS - PTFE
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE RANGE: -65 $ C TO +165 $ C
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL, 901-148-15 , AND DATE CODE"
5. CABLE ASSEMBLY INSTRUCTIONS
A. TRIM CABLE AS SHOWN.
B. SOLDER CABLE CENTER CONDUCTOR TO CONTACT.
C. INSERT CABLE WITH PTFE INSULATOR ENTERING CONNECTOR
AND BRAID OVER KNURL.
D. CRIMP FERRULE WITH AMPHENOL TOOL 227-944 AND
DIE SET 227-1221-57 CLOSURE 'A', .213" HEX DIE.
USE M22520/1-15 POSITIONER.
6. SHOWS CABLE ENTRY DIMENSIONS.
THIS CONNECTOR IS COVERED BY U.S. PATENT 3,439,294.
SECTION A-A
MIL-C-39012 INSPECTION
INTERFACE PER
MIL-STD-348
SMA SERIES
5/16" HEX
MAROON
RED
HEAT SHRINK TUBING
OUTER FERRULE
LOOSE CONTACT
INSULATOR
(PTFE)
SCALE 2.500
RECOMMENDED CABLE
STRIPPING DIMENSIONS
.016 MIN
3 SAFETY WIRE HOLES
