DATA SH EET
Product specification
Supersedes data of 1999 May 31 2004 Jan 16
DISCRETE SEMICONDUCTORS
BCX17; BCX18
PNP general purpose transistors
2004 Jan 16 2
Philips Semiconductors Product specification
PNP general purpose transistors BCX17; BCX18
FEATURES
•High current (max. 500 mA)
•Low voltage (max. 45 V).
APPLICATIONS
•Saturated switching and driver applications e.g. for
industrial service
•Thick and thin-film circuits.
DESCRIPTION
PNP transistor in a SOT23 plastic package.
NPN complement: BCX19.
MARKING
Note
1. * = p : Made in Hong Kong.
* = t : Made in Malaysia.
* = W : Made in China.
PINNING
TYPE NUMBER MARKING CODE(1)
BCX17 T1*
BCX18 T2*
PIN DESCRIPTION
1 base
2 emitter
3 collector
Fig.1 Simplified outline (SOT23) and symbol.
handbook, halfpage
21
3
MAM256
Top view
2
3
1
ORDERING INFORMATION
TYPE
NUMBER PACKAGE
NAME DESCRIPTION VERSION
BCX17 −plastic surface mounted package; 3 leads SOT23
BCX18
2004 Jan 16 3
Philips Semiconductors Product specification
PNP general purpose transistors BCX17; BCX18
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
Note
1. Transistor mounted on an FR4 printed-circuit board.
THERMAL CHARACTERISTICS
Note
1. Transistor mounted on an FR4 printed-circuit board.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCBO collector-base voltage open emitter
BCX17 −−50 V
BCX18 −−30 V
VCEO collector-emitter voltage open base
BCX17 −−45 V
BCX18 −−25 V
VEBO emitter-base voltage open collector −−5V
ICcollector current (DC) −−500 mA
ICM peak collector current −−1A
IBM peak base current −−200 mA
Ptot total power dissipation Tamb ≤25 °C; note 1 −250 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature −150 °C
Tamb operating ambient temperature −65 +150 °C
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth(j-a) thermal resistance from junction to ambient note 1 500 K/W
2004 Jan 16 4
Philips Semiconductors Product specification
PNP general purpose transistors BCX17; BCX18
CHARACTERISTICS
Tj=25°C unless otherwise specified.
Note
1. VBE decreases by approximately −2 mV/°C with increasing temperature.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
ICBO collector cut-off current IE= 0; VCB =−20 V −−−100 nA
IE= 0; VCB =−20 V; Tj= 150 °C−−−5µA
IEBO emitter cut-off current IC= 0; VEB =−5V −−−100 nA
hFE DC current gain IC=−100 mA; VCE =−1 V 100 −600
IC=−300 mA; VCE =−1V 70 −−
IC=−500 mA; VCE =−1V 40 −−
VCEsat collector-emitter saturation voltage IC=−500 mA; IB=−50 mA −−−620 mV
VBE base-emitter voltage IC=−500 mA; VCE =−1 V; note 1 −−−1.2 V
Cccollector capacitance IE=I
e= 0; VCB =−10 V; f = 1 MHz −9−pF
fTtransition frequency IC=−10 mA; VCE =−5 V; f = 100 MHz 80 −− MHz
2004 Jan 16 5
Philips Semiconductors Product specification
PNP general purpose transistors BCX17; BCX18
PACKAGE OUTLINE
UNIT A
1
max. b
p
cDE e
1
H
E
L
p
Qwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
97-02-28
99-09-13
IEC JEDEC EIAJ
mm 0.1 0.48
0.38 0.15
0.09 3.0
2.8 1.4
1.2 0.95
e
1.9 2.5
2.1 0.55
0.45 0.1
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT23 TO-236AB
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
w
M
v
M
A
B
AB
0 1 2 mm
scale
A
1.1
0.9
c
X
12
3
Plastic surface mounted package; 3 leads SOT23
2004 Jan 16 6
Philips Semiconductors Product specification
PNP general purpose transistors BCX17; BCX18
DATA SHEET STATUS
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
LEVEL DATA SHEET
STATUS(1) PRODUCT
STATUS(2)(3) DEFINITION
I Objective data Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III Product data Production This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseoratanyotherconditionsabovethosegiveninthe
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationorwarrantythatsuchapplications willbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomers usingorsellingtheseproducts
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
© Koninklijke Philips Electronics N.V. 2004 SCA76
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Philips Semiconductors – a w orldwide compan y
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Printed in The Netherlands R75/04/pp7 Date of release: 2004 Jan 16 Document order number: 9397 750 12406