1.27 mm pitch connector Straight through hole type female connector for PCB PCS-XE( )SFD( )N( )+ For PCB Straight Through hole SCSI-III Configuration of product Part No. PCS-XE ( ) S FD ( ) N ( )+ Screw size Blank: M2.50.45 U : #4-40UNC (standard) U2 : #2-56UNC Lock type N: Screw lock Contact plating Blank: Min. 0.2 m Gold plating G1 : Min. 0.76 m Gold plating Series name No. of contacts: 50, 68 or 100 Type of shell S: Short shell Type of connector FD: Straight through hole type, female A B C 2.54 1.27 POS.#2 POS.#1 5.54 8.2 Note 1: This 26-contact connector is not available for #4-40UNC and #2-56UNC screws. Screw size 15 LAST POS. D 4-R1 5.4 3.4 3.8 9.2 REF. * 0.350.4 1.27 * C E 1.9053 * * + B 0.1 + C 0.1 + 1.27 0.05 POS.#2 - LAST POS. - - + -0.1 POS.#1 5.0 HONDA JAPAN oG * * POS.#2 POS.#1 F 1.9050.053 LAST POS. + o0.8 0.06 - LAST POS. LAST POS. For 68 or 100-contact connectors For 68 or 100-contact connectors Dimensions Part No. PCS-XE50SFD( )N( )+ A 52.5 Shell A PCS-XE68SFD( )N( )+ Shell B PCS-XE100SFD( )N( )+ Components Insulator Contacts B 46.5 C 30.48 D 34.7 E 35.24 63.9 57.9 41.91 46.13 46.67 53.5 84.3 78.23 62.23 66.45 66.99 73.85 SMT F 42.1 Because some combinations of "Configurations of Product Part No.", are under consideration for development, please contact us for availability details. Mating connectors: PCS-XE series IDC type male connector Through hole Recommended PCB layout (Connector side) Press-in IDC Wire Soldering Crimping wrapping Others t = 1.6 mm Part No. PCS-XE( )SFDN( )+ Screws size M2.50.45 oG 2.8 PCS-XE( )SFDUN( )+ #4-40UNC 3.05 PCS-XE( )SFDU2N( )+ #2-56UNC 2.5