DRAWN
APPROVED
CHECKED
DATE
15/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 15/09/2015
SHT
1
DRAWING NO:
BND40A
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
15/09/2015
K.SHEPPARD 15/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
BANDING BACKSHELL
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AM END THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING REV:
G
MIL-DTL-38999 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-010973
DESCRIPTION DATE APPROVED
F
GREVISED PER ECO-15-016545 17/11/2015 H.SMITH
15/09/2015 H.SMITH
SERIES
BNX - BAND STRAP NOT INCLUDED
BND - BAND STRAP INCLUDED
(SEE BAND TERMINATION
CONFIGURATION)
CONNECTOR INTERFACE
MATERIAL
REFER TO CH00-0250-016
FINISH
REFER TO CH00-0250-016
ANGLE
ORDER NUMBER (TABLE 1)
ENTRY SIZE (TABLE 2)
BAND TERMINATION CONFIGURATION 3 8
V - ONE STEP STANDARD BAND
W - ONE STEP MICROBAND
U - TWO STEP STANDARD BAND
FOR BNX, LEAVE BLANK
OPTION FIELD SEPARATOR
MODIFICATION CODE
REFER TO CH00-0250-016 2
BNX40AB00-1608 -S
CODE 40 - BANDING BACKSHELL
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD BY MEANS
OF A BAND STRAP AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-016.
3. SEE DRAWING BND-XXXXX FOR MORE INFORMATION.
4. BACKSHELL TO BE PERMANENTLY MARKED WITH CODE IDENTIFICATION NUMBER AND FULL BASIC
PART NUMBER (e.g. 06090-BND40AB00-1814). BACKSHELL TO BE MARKED WITH "BND" EVEN IF
NO BAND IS ORDERED. THE BAND TERMINATION CONFIGURATION CODE IS FOR ORDERING INFORMATION ONLY
AND IS NOT A PART MARKING REQUIREMENT.
5. ALL ENTRY SIZES ARE SHOWN IN TABLE 2. MAXIMUM ENTRY SIZES ARE SHOWN IN TABLE 1.
IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED.
SEE CH00-0250-016 FOR FURTHER DETAILS.
6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W,
D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO
MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF
MIL-C-85049, PARA. 3. 5. 7.
7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED
8. V AND U BANDS ARE SUITABLE FOR ENTRY SIZES 03-24, W IS SUITABLE FOR ENTRY SIZES 03-12 ONLY.
CONTACT FACTORY FOR BAND OPTIONS ON LARGER ENTRY SIZES.
BAND (SUPPLIED FLAT) 3 8
(SEE PART NUMBER BREAKDOWN
FOR OPTIONS)
DRAWN
APPROVED
CHECKED
DATE
15/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 15/09/2015
SHT
2
DRAWING NO:
BND40A
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
15/09/2015
K.SHEPPARD 15/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
BANDING BACKSHELL
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AM END THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING REV:
G
MIL-DTL-38999 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-010973
DESCRIPTION DATE APPROVED
F
GREVISED PER ECO-15-016545 17/11/2015 H.SMITH
15/09/2015 H.SMITH
XXXX
XXXX
PART MARK
HERE
30,00
ØB
A THREAD
PART MARK
HERE
16,80 `0,50
ØB
A THREAD
16,80 `0,50
G
F
D
C
16,80 `0,50
E
W
T
STRAIGHT BACKSHELL - TYPE 1 STRAIGHT BACKSHELL - TYPE 2
45° BACKSHELL - TYPE 1 45° BACKSHELL - TYPE 2
90° BACKSHELL - TYPE 2
90° BACKSHELL - TYPE 1
W
T
E
J
H
16,80 `0,50 M
90° BACKSHELL - TYPE 2
STAINLESS STEEL AND
NICKEL ALUMINIUM BRONZE
90° BACKSHELL - TYPE 1
STAINLESS STEEL AND
NICKEL ALUMINIUM BRONZE
ØK
30,00
M
H
J
IF MAX ENTRY IS EXCEEDED BACKSHELL
WILL BE SUPPLIED AS TYPE 2
SILICONE
O-RING
ØZ
ØY
18,00
3,50
13,00
ØS
5
DRAWN
APPROVED
CHECKED
DATE
15/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 15/09/2015
SHT
3
DRAWING NO:
BND40A
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
15/09/2015
K.SHEPPARD 15/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
BANDING BACKSHELL
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AM END THIS DRAWING
AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
DRAWING REV:
G
MIL-DTL-38999 SERIES III & IV
REVISIONS
LTR
REVISED PER ECO-15-010973
DESCRIPTION DATE APPROVED
F
GREVISED PER ECO-15-016545 17/11/2015 H.SMITH
15/09/2015 H.SMITH
THESE DIMENSIONS APPLY IF
BACKSHELL IS STAINLESS STEEL
OR NICKEL ALUMINIUM BRONZE
THESE DIMENSIONS APPLY IF
BACKSHELL IS STAINLESS STEEL
OR NICKEL ALUMINIUM BRONZE
MODIFICATION S
(SELF-LOCKING COUPLING NUT)
BACKSHELL - TYPE 1 BACKSHELL - TYPE 2
SELF-LOCKING
MECHANISM
A THREAD
ØB 7
SELF-LOCKING
MECHANISM SELF-LOCKING
MECHANISM
A THREAD
ØB 7
ØK 7
21,60 `0,50
ORDER
NUMBER
SHELL SIZE
COM'L / MIL A THREAD ØB
MAX
ØB MAX
7
MAX
ENTRY
C
±0,5
D
±0,5
W
±0,5
T
±0,5
E
±0,5
W
±0,5
T
±0,5
E
±0,5
08 9 / A M12 × 1.0 18,0 21,5 04 12,0 25,1 21,0 14,0 30,0 21,2 16,3 29,0
10 11 / B M15 × 1.0 21,0 24,6 07 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2
12 13 / C M18 × 1.0 24,5 28,3 09 13,1 26,6 27,0 17,0 33,5 28,3 19,4 33,0
14 15 / D M22 × 1.0 29,0 32,4 10 13,5 27,5 31,0 19,5 35,4 31,1 21,0 34,9
16 17 / E M25 × 1.0 32,5 35,6 12 14,5 28,3 34,0 21,0 36,7 34,2 22,8 35,5
18 19 / F M28 × 1.0 35,5 38,5 14 15,5 28,8 35,0 20,0 38,3 38,5 25,3 37,2
20 21 / G M31 × 1.0 37,0 41,7 16 16,1 29,7 38,0 21,5 40,0 40,7 26,1 38,7
22 23 / H M34 × 1.0 40,0 43,9 18 16,5 30,0 42,0 24,0 41,6 43,7 27,6 40,2
24 25 / J M37 × 1.0 43,5 47,0 20 17,0 30,9 45,0 25,5 43,0 46,4 29,1 44,9
ENTRY
SIZE
ØZ
MIN
ØS
MAX
ØY
MAX
ØK
MAX
ØK MAX
7
F
±0,5
G
±0,5
H
±0,5
M
±0,5
J
±0,5
H
±0,5
M
±0,5
J
±0,5
03 4,7 7,8 14,0 NA NA NA NA NA NA NA NA NA NA
04 6,3 9,4 14,0 NA NA NA NA NA NA NA NA NA NA
05 7,9 11,0 15,5 21,0 24,6 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2
06 9,5 12,5 17,2 21,0 24,6 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2
07 11,1 14,1 18,7 21,0 24,6 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2
08 12,7 15,7 20,3 24,5 28,3 13,1 26,6 27,0 17,0 33,5 28,3 19,4 33,0
09 14,2 17,3 21,9 24,5 28,3 13,1 26,6 27,0 17,0 33,5 28,3 19,4 33,0
10 15,8 18,8 23,5 29,0 32,4 13,5 27,5 31,0 19,5 35,4 31,1 21,0 34,9
11 17,4 20,5 25,1 32,5 35,6 14,5 28,3 34,0 21,0 36,7 34,2 22,8 35,5
12 19,0 22,0 26,7 32,5 35,6 14,5 28,3 34,0 21,0 36,7 34,2 22,8 35,5
13 20,6 23,6 28,3 35,5 38,5 15,5 28,8 35,0 20,0 38,3 38,5 25,3 37,2
14 22,2 25,2 29,9 35,5 38,5 15,5 28,8 35,0 20,0 38,3 38,5 25,3 37,2
15 23,8 26,8 31,5 37,0 41,7 16,1 29,7 38,0 21,5 40,0 40,7 26,1 38,7
16 25,4 28,4 33,1 37,0 41,7 16,1 29,7 38,0 21,5 40,0 40,7 26,1 38,7
18 28,6 30,0 36,3 40,0 43,9 16,5 30,0 42,0 24,0 41,6 43,7 27,6 40,2
20 31,8 34,8 39,5 43,5 47,0 17,0 30,9 45,0 25,5 43,0 46,4 29,1 44,9
22 35,0 38,0 42,7 48,5 50,0 18,5 31,3 54,5 31,0 45,1 50,0 31,0 45,1
24 38,1 41,1 45,9 52,1 56,0 21,9 32,8 58,0 33,0 51,1 53,5 33,0 51,1
26 8 41,3 44,3 49,1 56,6 61,3 25,7 32,8 62,5 35,0 51,1 58,0 35,0 51,1
28 8 44,5 47,5 52,3 63,0 64,5 26,9 33,8 65,5 34,5 54,1 61,0 34,5 54,1
30 8 47,6 50,7 55,6 75,5 80,2 29,2 34,4 69,0 36,0 57,4 64,5 36,0 57,4
32 8 50,8 53,8 58,5 75,5 80,2 29,2 34,4 72,0 37,5 57,4 67,5 37,5 57,4
34 8 54,0 57,0 61,8 75,5 80,2 29,2 34,4 75,5 39,0 57,4 71,0 39,0 57,4
TABLE 1
TABLE 2
