RS-25 25W Single Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test No load power consumption<0.5W High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RS-25-3.3 RS-25-5 RS-25-12 RS-25-15 RS-25-24 RS-25-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 6A 5A 2.1A 1.7A 1.1A 0.57A CURRENT RANGE 0 ~ 6A 0 ~ 5A 0 ~ 2.1A 0 ~ 1.7A 0 ~ 1.1A 0 ~ 0.57A RATED POWER 19.8W 25W 25.2W 25.5W 26.4W 27.36W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 2.0% 10.8 ~ 13.2V 1.0% 13.5 ~ 16.5V 1.0% 22 ~ 27.6V 1.0% 42 ~ 54V 1.0% 2.85 ~ 3.6V VOLTAGE TOLERANCE Note.3 3.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1800ms, 23ms/230VAC HOLD UP TIME (Typ.) 80ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 73.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.7A/115VAC 0.4A/230VAC COLD START 30A/230VAC 78.5% 81.5% 83.5% <2mA / 240VAC OVERLOAD 110 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 6) EMC EMISSION EMC IMMUNITY MTBF NOTE 14ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) LEAKAGE CURRENT PROTECTION OTHERS 4000ms, 30ms/115VAC at full load DIMENSION PACKING 86% 85% 27.6 ~ 32.4V 55.2 ~ 64.8V Protection type : Shut off o/p voltage, clamping by zener diode -20 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 309.7Khrs min. MIL-HDBK-217F (25 78*51*28mm (L*W*H) 0.2Kg; 60pcs/13Kg/0.46CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:RS-25-SPEC 2011-08-19 MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: sales@meanwelldirect.co.uk RS-25 25W Single Output Switching Power Supply Mechanical Specification Case No.931A series Unit:mm 7.62 1 2 51 3 2-M3 L=4 25.4 6 4 5 LED +V ADJ. 10.5 55 78 14 max. Assignment AC/L AC/N FG Pin No. 4 5 Assignment DC OUTPUT -V DC OUTPUT +V 2-M3 14 Pin No. 1 2 3 28 Terminal Pin No. Assignment 2.75 66.5 Block Diagram fosc : 60KHz RECTIFIERS & FILTER EMI FILTER I/P FG RECTIFIERS & FILTER POWER SWITCHING DETECTION CIRCUIT PWM CONTROL O.L.P. +V -V Derating Curve Static Characteristics (24V) OUTPUT VOLTAGE (V) 100 80 3.3V only LOAD (%) 60 40 20 -20 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 ) 60 70 (HORIZONTAL) 32 300 28 250 24 200 20 150 16 100 12 50 8 25 60 80 100 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) Ta=25 Others 264 INPUT VOLTAGE (VAC) 60Hz File Name:RS-25-SPEC 2011-08-19 MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: sales@meanwelldirect.co.uk