AMP-TRAP(R) 2CL CABLE PROTECTORS /SPECIAL PURPOSE 250V CABLE PROTECTORS Ferraz Shawmut 2CL Cable Protectors are special purpose limiters which are crimped or bolted to cables or terminals to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are 250VAC current limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. These cable protectors are rated for both copper and aluminum cabling per their corresponding cable size. Features/Benefits Fiberglass bodies for dimensional stability in harsh environments Catalog number stamped into terminal for permanent identification 250VAC Rated Catalog Numbers TYPE TERMINATION BB BLADE TO BLADE BF BLADE TO OFFSET BUS CC CABLE TO CABLE CF CABLE TO OFFSET BUS CABLE SIZE 1 2 3 4 1/0 2/0 3/0 4/0 250 350 500 1 2 3 4 1/0 2/0 3/0 4/0 250 350 500 1/0 2/0 4/0 250 350 500 1/0 2/0 4/0 250 350 500 G Shorter in length than standard 600VAC rated cable limiters DESCRIPTION CATALOG NO. 2CL1BB 2CL2BB 2CL3BB 2CL4BB 2CL10BB 2CL20BB 2CL30BB 2CL40BB 2CL250BB 2CL350BB 2CL500BB 2CL1BF 2CL2BF 2CL3BF 2CL4BF 2CL10BF 2CL20BF 2CL30BF 2CL40BF 2CL250BF 2CL350BF 2CL500BF 2CL10CC 2CL20CC 2CL40CC 2CL250CC 2CL350CC 2CL500CC 2CL10CF 2CL20CF 2CL40CF 2CL250CF 2CL350CF 2CL500CF Ratings Sizes 1 to 500 kcmil copper and aluminum Approvals Ferraz Shawmut Certified 250VAC, 200kA I.R. Catalog Numbering System 2CL 250VAC Cable Limiter Conductor Size Termination Type 1st End Termination Type 2nd End *Please consult factory for special terminations. G 19 500 B B AMP-TRAP(R) 2CL CABLE PROTECTORS /SPECIAL PURPOSE Time in Seconds Melting Time -- Current Data, 250V Cable Protectors Current in Amperes Maximum Peak Let-Thru Current (A) Peak Let-Thru Current Data Cable Protectors 250V 50HzRMS Symetrical Prospective Curret (A) G 20