10
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized High Temperature PET (polyethylene terephtalate).
ADVANTAGES
• Use of high temperature dielectric films makes these
capacitors suitable for IR or vapor phase reflow processes.
This chip is built without specific encapsulation.
• The intrinsic elasticity of the dielectric film allows an
excellent compatibility of the capacitor with all types of
material for printed circuit boards.
• The self-healing property of film technology results to a
safety open failure mode and better overall reliability.
• Excellent thermal shock resistance.
• Low dissipation factor ESR & ESL.
• No piezoelectric effect.
• Available in tape and reel suitable for automatic placement.
• Non-polar construction.
Outer Layer
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PET dielectric
APPLICATIONS
General purpose function in low voltage applications where
miniaturization and SMD is required. Typical applications
would be:
• Automotive (Airbag, Fuel injection calculator...)
• Telecom (Public switching systems, modems, telephone
set, cordless, mobile)
• Industrial (SMPS, Power convertor module...)
PERFORMANCE CHARACTERISTICS
Climatic Category 55/125/56
Capacitance Range 10nF to 4.7µF
Tolerance on CR±5%, ±10%
Nominal Voltages 63Vdc to 630Vdc
Test Voltage 1.4Vr 2 sec. at 25°C
Soldering methods IR or vapor phase reflow (not suitable for wave soldering)
Tangent of Loss Angle at 1kHz (DF)
< 100 x 10-4
Insulation resistance minimum : IR
for C ≤ 0.33µF IR > 1000 M at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
for C > 0.33µF IR C > 400 sec. at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
Temperature range -55°C to 125°C with voltage derating of 1.25%/°C between 105°C and 125°C
A.C. applications for high frequency A.C. application please check with AVX
11
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 63V Vac: 40V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
0.270F CB042D0274+ -- 5.8 5.0 2.8 0.8 12.0 8.0 3.1 330 12.4 18.4 1500 3000 BC
(0.228) (0.195) (0.110) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724)
0.330µF CB042D0334+ -- 5.80 5.00 3.30 0.80 12.0 8.00 3.45 330 12.4 18.4 1500 2800 BC
(0.228) (0.195) (0.130) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724)
0.390 CB042D0394++ -- 5.80 5.00 3.40 0.80 12.0 8.00 3.45 330 12.4 18.4 1500 2800 BC
(0.228) (0.195) (0.134) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724)
0.470 CB042D0474+ -- 5.80 5.00 3.50 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.138) (0.032) (0.472) (0.315) (0.162) (12.99) (0.488) (0.724)
0.560 CB042D0564+ -- 5.80 5.00 3.50 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.138) (0.032) (0.472) (0.315) (0.162) (12.99) (0.488) (0.724)
0.680 CB042D0684+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.162) (12.99) (0.488) (0.724)
0.820 CB052D0824+ -- 7.2 6.1 3.7 0.8 24.0 12 3.8 330 24.4 30.4 1000 2250 BC
(0.283) (0.24) (0.146) (0.032) (0.944) (0.472) (0.149) (12.99) (0.96) (1.196)
1F CB052D0105+ -- 7.2 6.1 3.7 0.8 24.0 12 3.8 330 24.4 30.4 1000 2250 BC
(0.283) (0.24) (0.146) (0.032) (0.944) (0.472) (0.149) (12.99) (0.96) (1.196)
1.5 CB052D0155+ -- 7.20 6.10 5.30 0.80 16.0 12.0 5.50 330 16.4 22.4 1000 1000 BC
(0.283) (0.240) (0.209) (0.032) (0.629) (0.472) (0.216) (12.99) (0.645) (0.881)
2.2 CB162D0225+ -- 10.5 7.6 5.8 0.8 24.0 12 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.229) (0.032) (0.944) (0.472) (0.244) (12.99) (0.96) (1.196)
3.3 CB172D0335+ -- 12.8 10.2 5.50 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC
(0.503) (0.401) (0.216) (0.032) (0.944) (0.629) (0.224) (12.99) (0.961) (1.196)
4.7µF CB182D0475+ -- 15.3 13.7 4.90 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC
(0.601) (0.539) (0.193) (0.032) (0.944) (0.944) (0.216) (12.99) (0.961) (1.196)
VOLTAGE Vdc: 100V Vac: 63V
0.180F CB042E0184+ -- 5.8 5.0 2.3 0.8 12.0 8.0 2.43 330 12.4 18.4 1500 3500 BC
(0.228) (0.195) (0.091) (0.032) (0.472) (0.315) (0.096) (12.99) (0.488) (0.724)
0.220µF CB042E0224+ -- 5.80 5.00 3.30 0.80 12.0 8.00 3.45 330 12.4 18.4 1500 3000 BC
(0.228) (0.195) (0.130) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724)
0.270F CB042E0274 +-- 5.8 5.0 3.4 0.8 12.0 8.0 3.45 330 12.4 18.4 1500 2800 BC
(0.228) (0.195) (0.134) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724)
0.330 CB042E0334+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.390 CB042E0394+ -- 5.80 5.00 3.90 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.154) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.470 CB042E0474+ -- 5.80 5.00 4.30 0.80 12.0 8.0 4.50 330 12.4 18.4 1500 1900 BC
(0.228) (0.195) (0.169) (0.032) (0.472) (0.315) (0.177) (12.99) (0.488) (0.724)
0.560 CB052E0564+ -- 7.20 6.10 4.20 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC
(0.283) (0.240) (0.165) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
0.680 CB052E0684+ -- 7.20 6.10 5.00 0.80 16.0 12.0 5.23 330 16.4 22.4 1000 1100 BC
(0.283) (0.240) (0.197) (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881)
0.820 CB052E0824+ -- 7.20 6.10 4.70 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC
(0.283) (0.240) (0.185) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
1µF CB052E0105+ -- 7.20 6.10 5.70 0.80 16.0 12.0 5.90 330 16.4 22.4 1000 900 BC
(0.283) (0.240) (0.224) (0.032) (0.629) (0.472) (0.232) (12.99) (0.645) (0.881)
1.5 CB162E0155+ -- 10.5 7.60 6.10 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.240) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
millimeters (inches)
W
L
H
T
12
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 100V Vac: 63V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
2.2 CB172E0225+ -- 12.8 10.2 5.50 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC
(0.503) (0.401) (0.216) (0.032) (0.944) (0.629) (0.224) (12.99) (0.961) (1.196)
3.3 CB182E0335+ -- 15.3 13.7 5.20 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC
(0.601) (0.539) (0.204) (0.032) (0.944) (0.944) (0.216) (12.99) (0.961) (1.196)
4.7µF CB182E0475+ -- 15.3 13.7 7.10 0.80 24.0 24.0 7.60 330 24.4 30.4 300 300 BC
(0.601) (0.539) (0.279) (0.032) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196)
VOLTAGE Vdc: 250V Vac: 160V
0.047µF CB042G0473+ -- 5.80 5.00 3.00 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 3000 BC
(0.228) (0.195) (0.118) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724)
0.056 CB042G0563+ -- 5.80 5.00 3.60 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.142) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.068 CB042G0683+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.082 CB042G0823+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.1µF CB042G0104+ -- 5.80 5.00 4.00 0.80 16.0 8.00 4.10 330 16.4 22.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.629) (0.315) (0.161) (12.99) (0.645) (0.881)
0.120 CB052G0124+ -- 7.20 6.10 4.30 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC
(0.283) (0.240) (0.169) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
0.150 CB052G0154+ -- 7.20 6.10 4.30 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC
(0.283) (0.240) (0.169) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
0.180 CB052G0184+ -- 7.20 6.10 5.10 0.80 16.0 12.0 5.23 330 16.4 22.4 1000 1100 BC
(0.283) (0.240) (0.200) (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881)
0.220 CB052G0224+ -- 7.20 6.10 4.90 0.80 16.0 12.0 5.23 330 16.4 22.4 1000 1100 BC
(0.283) (0.240) (0.193) (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881)
0.270 CB162G0274+ -- 10.5 7.60 4.80 0.80 24.0 12.0 6.19 330 24.4 30.4 500 1100 BC
(0.413) (0.299) (0.189) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.330 CB162G0334+ -- 10.5 7.60 5.60 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.220) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.390 CB162G0394+ -- 10.5 7.60 5.40 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.213) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.470 CB162G0474+ -- 10.5 7.6 6.15 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.241) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.560 CB172G0564+ -- 12.8 10.2 5.60 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC
(0.503) (0.402) (0.220) (0.032) (0.944) (0.629) (0.225) (12.99) (0.961) (1.196)
0.680 CB172G0684+ -- 12.8 10.2 6.50 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC
(0.503) (0.402) (0.255) (0.032) (0.944) (0.629) (0.275) (12.99) (0.961) (1.196)
0.820 CB182G0824+ -- 15.3 13.7 5.10 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC
(0.601) (0.539) (0.201) (0.032) (0.944) (0.944) (0.217) (12.99) (0.961) (1.196)
1µF CB182G0105+ -- 15.3 13.7 6.00 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC
(0.601) (0.539) (0.236) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196)
1.5 CB182G0155+ -- 15.3 13.7 7.00 0.80 24.0 24.0 7.60 330 24.4 30.4 300 300 BC
(0.601) (0.539) (0.276) (0.0315) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196)
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
millimeters (inches)
W
L
H
T
13
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 400V Vac: 200V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
0.010µF CB042I0103+ -- 5.80 5.00 3.00 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 3000 BC
(0.228) (0.195) (0.017) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724)
0.012 CB042I0123+ -- 5.80 5.00 2.40 0.80 12.0 8.00 2.43 330 12.4 18.4 1500 3500 BC
(0.228) (0.195) (0.095) (0.032) (0.472) (0.315) (0.096) (12.99) (0.488) (0.724)
0.015 CB042I0153+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.018 CB052I0183+ -- 7.2 6.1 2.8 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC
(0.283) (0.240) (0.110) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881)
0.022 CB052I0223+ -- 7.2 6.1 3.5 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC
(0.283) (0.240) (0.138) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881)
0.027 CB052I0273+ -- 7.2 6.1 2.8 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC
(0.283) (0.240) (0.110) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881)
0.033 CB052I0333+ -- 7.2 6.1 3.3 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC
(0.283) (0.240) (0.130) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881)
0.047 CB052I0473+ -- 7.20 6.10 4.50 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC
(0.283) (0.240) (0.177) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
0.056 CB162I0563+ -- 10.5 7.60 3.10 0.80 24.0 12.0 3.93 330 24.4 30.4 500 1400 BC
(0.413) (0.299) (0.122) (0.032) (0.944) (0.472) (0.155) (12.99) (0.961) (1.196)
0.068 CB162I0683+ -- 10.5 7.60 3.60 0.80 24.0 12.0 3.93 330 24.4 30.4 500 1400 BC
(0.413) (0.299) (0.141) (0.032) (0.944) (0.472) (0.155) (12.99) (0.961) (1.196)
0.082 CB162I0823+ -- 10.5 7.60 4.20 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.165) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.100µF CB162I0104+ -- 10.5 7.60 4.70 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.185) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.120 CB172I0124+ -- 12.8 10.2 3.90 0.80 24.0 16.0 4.00 330 24.4 30.4 300 1100 BC
(0.503) (0.402) (0.154) (0.032) (0.944) (0.629) (0.157) (12.99) (0.961) (1.196)
0.150 CB172I0154+ -- 12.8 10.2 4.60 0.80 24.0 16.0 4.70 330 24.4 30.4 300 900 BC
(0.503) (0.402) (0.181) (0.032) (0.944) (0.629) (0.185) (12.99) (0.961) (1.196)
0.180 CB172I0184+ -- 12.8 10.2 5.60 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC
(0.503) (0.402) (0.220) (0.032) (0.944) (0.629) (0.274) (12.99) (0.961) (1.196)
0.220 CB172I0224+ -- 12.8 10.2 6.80 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC
(0.503) (0.402) (0.265) (0.032) (0.944) (0.629) (0.274) (12.99) (0.961) (1.196)
0.270 CB172I0274+ -- 12.8 10.2 6.80 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC
(0.503) (0.402) (0.265) (0.032) (0.944) (0.629) (0.274) (12.99) (0.961) (1.196)
0.330 CB182I0334+ -- 15.3 13.7 5.60 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC
(0.601) (0.539) (0.220) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196)
0.470µF CB182I0474+ -- 15.3 13.7 6.20 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC
(0.601) (0.539) (0.244) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196)
VOLTAGE Vdc: 630V Vac: 250V
0.010µF CB042K0103+ -- 5.80 5.00 2.80 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 3000 BC
(0.228) (0.195) (0.110) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724)
0.012 CB042K0123+ -- 5.80 5.00 3.30 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 2800 BC
(0.228) (0.195) (0.130) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724)
0.015 CB042K0153+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC
(0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724)
0.018 CB052K0183+ -- 5.80 6.10 2.80 0.80 24.0 12.0 3.80 330 24.4 30.4 1000 2250 BC
(0.228) (0.240) (0.110) (0.032) (0.944) (0.472) (0.149) (12.99) (0.961) (1.196)
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
millimeters (inches)
W
L
H
T
14
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 630V Vac: 250V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
0.022 CB052K0223+ -- 7.20 6.10 3.50 0.80 24.0 12.0 3.80 330 24.4 30.4 1000 2250 BC
(0.283) (0.240) (0.138) (0.032) (0.944) (0.472) (0.149) (12.99) (0.961) (1.196)
0.027 CB052K0273+ -- 7.20 6.10 4.10 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC
(0.283) (0.240) (0.161) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
0.033 CB052K0333+ -- 7.20 6.10 5.00 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1100 BC
(0.283) (0.240) (0.197) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881)
0.047 CB162K0473+ -- 10.5 7.60 3.60 0.80 24.0 12.0 3.93 330 24.4 30.4 500 1400 BC
(0.413) (0.299) (0.141) (0.032) (0.944) (0.472) (0.155) (12.99) (0.961) (1.196)
0.056 CB162K0563+ -- 10.5 7.60 4.30 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.169) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.068 CB162K0683+ -- 10.5 7.60 5.20 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC
(0.413) (0.299) (0.205) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196)
0.082 CB172K0823+ -- 12.8 10.2 4.30 0.80 24.0 16.0 4.70 330 24.4 30.4 300 900 BC
(0.503) (0.402) (0.169) (0.032) (0.944) (0.629) (0.185) (12.99) (0.961) (1.196)
0.100µF CB172K0104+ -- 12.8 10.2 5.00 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC
(0.503) (0.402) (0.197) (0.032) (0.944) (0.629) (0.225) (12.99) (0.961) (1.196)
0.120 CB172K0124+ -- 12.8 10.2 5.60 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC
(0.503) (0.402) (0.220) (0.032) (0.944) (0.629) (0.225) (12.99 ) (0.961) (1.196 )
0.150 CB172K0154+ -- 12.8 10.2 6.90 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC
(0.503) (0.402) (0.271) (0.032) (0.944) (0.629) (0.275) (12.99 ) (0.961) (1.196 )
0.180 CB182K0184+ -- 15.3 13.7 5.00 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC
(0.601) (0.539) (0.197) (0.032) (0.944) (0.944) (0.217) (12.99) (0.961) (1.196)
0.220 CB182K0224+ -- 15.3 13.7 5.80 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC
(0.601) (0.539) (0.229) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196)
0.270µF CB182K0274+ -- 15.3 13.7 7.20 0.80 24.0 24.0 7.60 330 24.4 30.4 300 300 BC
(0.601) (0.539) (0.284) (0.032) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196)
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BC = tape & reel
millimeters (inches)
W
L
H
T
15
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
MOUNTING AND SOLDERING RECOMMENDATIONS
*Reflow soldering referring to JEDEC Standard with some limitations
*JEDEC J-Std 020C
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT
suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
RECOMMENDED SOLDER PASTE THICKNESS
Profile Feature 2220 to 2824 4030 to 6054 Except 400
& 630V 2220
Ramp-Up (Tsmax to Tp) 3°C / second max 3°C / second max 3°C / second max
Preheat
- Temperature Min (Tsmin) 150°C 150°C 150°C
- Temperature Min (Tsmax) 200°C 200°C 200°C
- Time (tsmin to tsmax) 180 sec. max 180 sec. max 180 sec. max
Time maintained above
- Temperature (TL) 217°C 217°C 217°C
- Time (tL) 60 sec. max 75 sec. max 60 sec. max
Peak temperature (Tp) 245°C 250°C 240°C
Time within 5°C of peak 10 sec. 10 sec. 10 sec.
temperature (tp)
Ramp-Down 6°C / sec. 6°C / sec. 6°C / sec.
For optimum solderability, the recommended soldering
paste thickness: 2220 to 2824 :150 to 200µm
4030 to 6054 :200 to 300µm
In case of hand soldering, the temperature of the soldering
iron should not be above 250°C. Special care must be taken
to avoid touching the capacitor body with the iron tip.
Size Code Case Size A B C
04 2220 5.00 (0.195) 1.90 (0.075) 4.50 (0.178)
05 2824 6.00 (0.234) 2.50 (0.098) 5.70 (0.224)
16 4030 7.50 (0.295) 3.00 (0.118) 8.00 (0.315)
17 5040 11.2 (0.441) 3.50 (0.137) 10.3 (0.406)
18 6064 14.6 (0.575) 3.60 (0.147) 12.6 (0.496)
PAD DIMENSIONS: millimeters (inches)
A
CB
RECOMMENDED CLEANING
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active
agent. In case of using another solvent, please contact us.
OTHER CAUTIONS
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or
gas atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not
to damage the capacitors.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
Stress Type Ref. Spec. Test Conditions Analysis Results
Temperature cycling JESD22-A104 -55°C +85(+10/-0)°C air SEM x 1000 Pass
5 to 10 minutes soak 3 cycles/hour
Ambient Temperature / 30+/-2°C - 60+/-3% RH -2000H SEM x 1000 Pass
Humidity Storage
High Temperature / 70+/-5°C - 93+3/-2% RH -1000H SEM x 1000 Pass
Humidity Storage
030
Time (seconds)
Temperature (ºC)
60 90 120 150 180 210 240
Ramp
down
Ramp up
270 300 330
Tp
Tp - 5ºC
Ts min
Ts max
TL
tS
tp
tL
16
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
10
8
6
4
2
0
-2
-4
-6
-8
⌬C/C vs TEMPERATURE
Temperature
-55˚C -30˚C -5˚C +20˚C +45˚C +70˚C +95˚C +120˚C
10000.0
1000.0
100.0
10.0
1.0
0.1
IR(G.ohm)
Temperature
IR vs TEMPERATURE 100nF
-55˚C -30˚C -5˚C +20˚C +45˚C +70˚C +95˚C +120˚C
160
140
120
100
80
60
40
20
0
DC/C = (temperature)
Temperature
DF (1kHz) vs TEMPERATURE
-55˚C -30˚C -5˚C +20˚C +45˚C +70˚C +95˚C +120˚C
D.F. (10-4)
Capacitance
Dissipation Factor
Insulation Resistance
FREQUENCY CHARACTERISTICS
4
3
2
1
0
-1
-2
-3
-4
-50.1 1 10 100 1000
⌬C/C 20°C (%)
FREQUENCY (kHz)
1000.00
100.00
10.00
1.00
1.00 10.00
FREQUENCY (MHz)
Z (mOhm)
1µF
470 nF
220 nF
47 nF
100 nF
4.7µF
400
300
200
100
010 100 1000
10.1
DF 20°C (10 )
-4
FREQUENCY (kHz)
Capacitance
Dissipation Factor
Impedance
17
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB04 to CB18)
0
5
10
15
20
25
30
35
40
45
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
V rms (V)
4.7µF 1.5µF 0.47µF
0
20
40
60
80
100
120
140
160
180
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
V rms (V)
4.7µF 0.47µF
0.1µF
0
10
20
30
40
50
60
70
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
V rms (V)
4.7µF 1.5µF 0.22µF
63Vdc / 40 Vac
100 Vdc / 63 Vac
250 Vdc / 160 Vac
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
I rms (A)
4.7µF
0.47µF
0.1µF
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
I rms (A)
4.7µF
1.5µF
0.22µF
63Vdc / 40 Vac
100 Vdc / 63 Vac
250 Vdc / 160 Vac
18
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM PULSE RISE TIME (DV/DT)
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB04 to CB18)
0
20
40
60
80
100
120
140
160
180
200
220
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
V rms (V)
0.47µF 0.1µF 0.01µF
0
0.5
1
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
I rms (A)
0.47µF
0.1µF
0.01µF
400 Vdc / 200 Vac 400 Vdc / 200 Vac
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
V rms (V)
0.27µF 0.1µF 0.01µF
0
0.5
1
0.1 1 10 100 1000 10000
FREQUENCY (kHz)
I rms (A)
0.27µF
0.1µF
0.01µF
630 Vdc / 250 Vac 630 Vdc / 250 Vac
Voltage Range 63 100 250 400 630
Dv/dt max. 40 50 150 200 250
(V/µsec)
19
Film Chip Capacitors
PET-HT DIELECTRIC – CB Series – RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g) Lead Mercury Cadmium Hexavalent PBB PBDE
Chromium
CB range 000 0 00
RoHS Limit (ppm) 1000 1000 100 1000 1000 1000
Pass/Fail Pass Pass Pass Pass Pass Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
External Plating
100% Matte Sn as standard
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
Pb Free Reflow Solder compliant, MSL = 3.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL
e3 termination.
PRODUCT LABELING:
(For informational purposes only to be phased in on reel and
container.)
PRODUCT TRACEABILITY:
Full internal material traceability by reference to unique lot
number marked on reel and external package.
RoHS Compliant:
Pb Free: