To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC29M33A, 29M05A THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION The PC29M33A, 29M05A of low dropout voltage three terminal positive regulators is constructed with PNP output transistor. The PC29M33A, 29M05A feature the ability to source 0.5 A of output current with a low dropout voltage of typically 0.5 V. The power dissipation of the PC29M33A, 29M05A can be drastically reduced compared with the conventional three terminal positive voltage regulators that is constructed with NPN output transistor. Also, this series corresponds to the low voltage output (3.3 V) which is not in the conventional low dropout regulators ( PC24MxxA series). FEATURES * Output current in excess of 0.5 A * Low dropout voltage VDIF = 0.5 V TYP. (IO = 0.5 A) * On-chip over-current and thermal protection circuit * On-chip output transistor safe operating area protection circuit PIN CONFIGURATIONS (Marking Side) PC29M33AHF, PC29M33AHB, PC29M33AT, PC29M05AHF: Isolated TO-220 (MP-45G) PC29M05AHB: SC-64 (MP-3) PC29M05AT: SC-63 (MP-3Z) 4 1 2 3 1: INPUT 2: GND 3: OUTPUT 1 2 3 4 1: INPUT Note1 2: GND 3: OUTPUT 4: GND (Fin) 1 2 3 1: INPUT 2: GND Note2 3: OUTPUT 4: GND (Fin) Notes 1. No.2 pin and No.4 fin are common GND. 2. No.2 pin is cut. No.2 pin and No.4 fin are common GND. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. G15368EJ4V0DS00 (4th edition) Date Published August 2007 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2001, 2007 PC29M33A, 29M05A BLOCK DIAGRAM INPUT Safe operating area protection Start-up circuit Reference voltage Error Amp. Drive circuit Saturation protection OUTPUT Thermal shut down Over-current protection GND 2 Data Sheet G15368EJ4V0DS PC29M33A, 29M05A <R> ORDERING INFORMATION Part Number Package Output Voltage Marking PC29M33AHF Isolated TO-220 (MP-45G) 3.3 V 29M33A PC29M33AHB SC-64 (MP-3) 3.3 V 29M33A PC29M33AT SC-63 (MP-3Z) 3.3 V 29M33A PC29M05AHF Isolated TO-220 (MP-45G) 5.0 V 29M05A PC29M05AHB SC-64 (MP-3) 5.0 V 29M05A PC29M05AT SC-63 (MP-3Z) 5.0 V 29M05A Remark Tape-packaged products have the symbol -E1, or -E2 suffixed to the part number. Pb-free products have the symbol -AZ, or -AY suffixed to the part number. Refer to the following table for details. Part Number Note1 PC29MxxAHF PC29MxxAHF-AZ Note2 PC29MxxAHB Package Package Type Isolated TO-220 (MP-45G) * Packed in envelop Isolated TO-220 (MP-45G) * Packed in envelop SC-64 (MP-3) * Packed in envelop PC29MxxAHB-AZ Note2 SC-64 (MP-3) * Packed in envelop PC29MxxAHB-AY Note3 SC-64 (MP-3) * Packed in envelop SC-63 (MP-3Z) * 16 mm wide embossed taping PC29MxxAT-E1 * Pin 1 on draw-out side * 2000 pcs/reel PC29MxxAT-E1-AZ Note2 * 16 mm wide embossed taping SC-63 (MP-3Z) * Pin 1 on draw-out side * 2000 pcs/reel PC29MxxAT-E1-AY Note3 * 16 mm wide embossed taping SC-63 (MP-3Z) * Pin 1 on draw-out side * 2000 pcs/reel PC29MxxAT-E2 * 16 mm wide embossed taping SC-63 (MP-3Z) * Pin 1 at take-up side * 2000 pcs/reel PC29MxxAT-E2-AZ Note2 * 16 mm wide embossed taping SC-63 (MP-3Z) * Pin 1 at take-up side * 2000 pcs/reel PC29MxxAT-E2-AY Note3 * 16 mm wide embossed taping SC-63 (MP-3Z) * Pin 1 at take-up side * 2000 pcs/reel Notes 1. xx stands for symbols that indicate the output voltage. 2. Pb-free (This product does not contain Pb in the external electrode.) 3. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.) Data Sheet G15368EJ4V0DS 3 PC29M33A, 29M05A ABSOLUTE MAXIMUM RATINGS (TA = 25C) Parameter Rating Symbol Unit PC2933AHF, 2905AHF PC2933AHB, 2905AHB PC2933AT, 2905AT Input Voltage VIN Internal Power Dissipation (TC = 25C) Note 20 PT V 15 10 W Operating Ambient Temperature TA -30 to +85 C Operating Junction Temperature TJ -30 to +150 C Storage Temperature Tstg -55 to +150 C Thermal Resistance (junction to case) Rth(J-C) 7 12.5 C/W Thermal Resistance (junction to ambient) Rth(J-A) 65 125 C/W Note Internally limited. When the operating junction temperature rises above 150C, the internal circuit shuts down the output voltage. Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded. TYPICAL CONNECTION D1 PC29M33A, 29M05A INPUT CIN OUTPUT + COUT D2 CIN : 0.1 F or higher. Be sure to connect CIN to prevent parasitic oscillation. Set this value according to the length of the line between the regulator and the INPUT pin. Use of a film capacitor or other capacitor with first-rate voltage and temperature characteristics is recommended. If using a laminated ceramic capacitor, it is necessary to ensure that CIN is 0.1 F or higher for the voltage and temperature range to be used. COUT: 47 F or higher. Be sure to connect COUT to prevent oscillation and improve excessive load regulation. Place CIN and COUT as close as possible to the IC pins (within 1 to 2 cm). Also, use an electrolytic capacitor with low impedance characteristics if considering use at sub-zero temperatures. D1 : If the OUTPUT pin has a higher voltage than the INPUT pin, connect a diode. D2 : If the OUTPUT pin has a lower voltage than the GND pin, connect a Schottky barrier diode. Caution Make sure that no voltage is applied to the OUTPUT pin from external. 4 Data Sheet G15368EJ4V0DS PC29M33A, 29M05A RECOMMENDED OPERATING CONDITIONS Parameter Symbol Type Number MIN. TYP. MAX. Unit PC29M33A 4.3 16 PC29M05A 6 16 IO All 0 0.5 A Operating Ambient Temperature TA All -30 +85 C Operating Junction Temperature TJ All -30 +125 C Input Voltage Output Current VIN V ELECTRICAL CHARACTERISTICS PC29M33A (TJ = 25C, VIN = 5 V, IO = 350 mA, CIN = 0.22 F, COUT = 47 F, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO MIN. TYP. MAX. 3.18 3.3 3.42 0C TJ 125C, 4.3 V VIN 16 V, 0 A IO 350 mA 3.14 3.46 Unit V 0C TJ 125C, 0 A IO 0.5 A Line Regulation REGIN 4.3 V VIN 16 V 8 33 mV Load Regulation REGL 0 A IO 0.5 A 10 33 mV Quiescent Current IBIAS IO = 0 A 1.8 3.0 IO = 0.5 A 15 20 VIN = 3.1 V, IO = 0 A 9 20 Startup Quiescent Current IBIAS (s) VIN = 3.1 V, IO = 0.5 A 50 Quiescent Current Change IBIAS 0C TJ 125C, 4.3 V VIN 16 V 2.9 Output Noise Voltage Vn 10 Hz f 100 kHz 56 Ripple Rejection R*R 4.3 V VIN 16 V, f = 120 Hz Dropout Voltage VDIF 0C TJ 125C, IO = 0.5 A Short Circuit Current IOshort VIN = 4.5 V 48 0.7 VIN = 16 V Peak Output Current Temperature Coefficient of IOpeak VO/T 15 64 1.0 1.1 1.5 0.6 1.2 1.5 VIN = 16 V 0.6 1.0 1.5 Data Sheet G15368EJ4V0DS -0.4 mA dB 0.5 0.7 0C TJ 125C, IO = 5 mA mA Vr.m.s. VIN = 4.5 V Output Voltage mA V A A mV/C 5 PC29M33A, 29M05A PC29M05A (TJ = 25C, VIN = 8 V, IO = 350 mA, CIN = 0.22 F, COUT = 47 F, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO MIN. TYP. MAX. 4.83 5.0 5.18 0C TJ 125C, 6 V VIN 16 V, 0 A IO 350 mA 4.75 5.25 Unit V 0C TJ 125C, 0 A IO 0.5 A Line Regulation REGIN 6 V VIN 16 V 26 50 mV Load Regulation REGL 0 A IO 0.5 A 17 50 mV Quiescent Current IBIAS IO = 0 A 1.9 4.0 IO = 0.5 A 15 20 VIN = 4.5 V, IO = 0 A 10 20 Startup Quiescent Current IBIAS (s) VIN = 4.5 V, IO = 0.5 A 50 mA mA Quiescent Current Change IBIAS 0C TJ 125C, 6 V VIN 16 V 2.4 Output Noise Voltage Vn 10 Hz f 100 kHz 87 Vr.m.s. Ripple Rejection R*R 6 V VIN 16 V, f = 120 Hz 60 dB Dropout Voltage VDIF 0C TJ 125C, IO = 0.5 A Short Circuit Current IOshort VIN = 6.5 V 46 0.65 VIN = 16 V Peak Output Current Temperature Coefficient of IOpeak VO/T 0.5 1.0 1.1 1.5 0.6 VIN = 6.5 V 0.7 1.2 1.5 VIN = 16 V 0.6 1.1 1.5 0C TJ 125C, IO = 5 mA Output Voltage 6 15 Data Sheet G15368EJ4V0DS 0.5 mA V A A mV/C PC29M33A, 29M05A TYPICAL CHARACTERISTICS VO vs TJ Pd vs. TA Solid line: PC29M33AHF, PC29M05AHF Broken line: PC29M33AHB , PC29M05AHB PC29M33AT , PC29M05AT 15 VO - Output Voltage Change - mV Pd - Total Power Dissipation - W 20 150 With infinite heatsink 10 5 1.92 1.0 0 Without heatsink 100 50 PC29M05A 0 PC29M33A -50 -100 -150 IO = 5 mA 25 0 50 75 100 125 -200 -50 150 50 0 100 TJ - Operating Junction Temperature - C TA - Operating Ambient Temperature - C VO vs. VIN (PC29M05A) VO vs. VIN (PC29M33A) 8 4.0 TJ = 25C TJ = 25C I O = 5 mA 7 3.5 I O = 0.5 A 6 3.0 VO - Output Voltage - V VO - Output Voltage - V I O = 0.35 A I O = 0.5 A 2.5 2.0 1.5 1.0 I O = 0.35 A 5 I O = 5 mA 4 3 2 1 0.5 0 0 0 1 2 3 4 5 6 VIN - Input Voltage - V 7 0 8 1 7 8 T = 25C IBIAS - Quiescent Current - mA 40 30 20 I O = 0.5 A I O = 0.35 A 40 30 20 I O = 0.5 A I O = 0.35 A 10 IO= 0 A 0 3 4 5 6 VIN - Input Voltage - V 50 TJ = 25C 10 2 IBIAS (IBIAS(s)) vs. VIN (PC29M05A) IBIAS (IBIAS(s)) vs. VIN ( PC29M33A) 50 IBIAS - Quiescent Current - mA 150 O =0A 0 0 2 4 6 8 10 12 14 16 18 20 0 2 VIN - Input Voltage - V Data Sheet G15368EJ4V0DS 4 6 8 10 12 14 VIN - Input Voltage - V 16 18 20 7 PC29M33A, 29M05A IOpeak vs. VDIF (PC29M33A) VDIF vs. TJ 1.5 IOpeak - Peak Output Current - A VDIF - Dropout Voltage - V 1.0 0.8 0.6 PC29M05A PC29M33A 0.4 0.2 1.0 TJ = 0C TJ = 25C TJ = 125C 0.5 I O = 0.5 A 0 -25 0 25 50 75 100 125 0.0 150 0 TJ - Operating Junction Temperature - C 5 10 15 VDIF - Dropout Voltage - V IOpeak vs. VDIF (PC2905A) R*R vs f 80 R*R - Ripple Rejection - dB 1.5 IOpeak - Peak Output Current - A 20 TJ = 0C 1.0 TJ = 25C 0.5 TJ = 125C 70 PC29M33A 60 PC29M05A 50 40 30 TJ = 25C, IO = 0.5 A 4.3 V VIN 16 V PC29M33A 6 V VIN 16 V PC29M05A 20 0 0.0 5 0 10 15 10 20 100 1k 10 k 100 k f - Frequency - Hz VDIF - Dropout Voltage - V . VDIF vs. IO R R vs. IO 80 1.0 40 VDIF - Dropout Voltage - V . R - Ripple Rejection - dB 70 R TJ = 25C PC29M33A 60 PC29M05A 50 TJ = 25C, f = 120 Hz 4.3 V VIN 16 V PC29M33A 6 V VIN 16 V PC29M05A 0.8 0.6 PC29M33A 0.4 PC29M05A 0.2 30 0 0 0.1 0.2 0.3 0.4 0.5 0 8 0.1 0.2 0.3 IO - Output Current - A IO - Output Current - A Data Sheet G15368EJ4V0DS 0.4 0.5 PC29M33A, 29M05A VO vs. IO (PC29M05A) VO vs. IO ( PC29M33A) 6 6 TJ = 25C TJ = 25C 5 VO - Output Voltage - V VO - Output Voltage - V 5 4 V =5V 3 2 VIN = 16 V 4 3 VIN = 16 V 2 VIN = 6 V 1 1 0 VIN = 8V VIN = 4.3 V 0.2 0.4 0.6 0.8 1.0 1.2 0 IO - Output Current - A Data Sheet G15368EJ4V0DS 0.2 0.4 0.6 0.8 IO - Output Current - A 1.0 1.2 9 PC29M33A, 29M05A PACKAGE DRAWINGS PC29M33AHF, PC29M05AHF 3PIN PLASTIC SIP (MP-45G) A N E P B I L M D 1 2 3 K Y V J H U Z C F G M NOTE ITEM Each lead centerline is located within 0.25 mm of its true position (T.P.) at maximum material condition. MILLIMETERS A B 10.00.2 7.00.2 C 1.500.2 D E 17.00.3 3.30.2 F 0.750.10 G 0.25 H I 2.54 (T.P.) 5.00.3 J K 2.460.2 5.00.2 L M 8.50.2 8.50.2 N 4.50.2 P U V 2.80.2 2.40.5 0.650.10 Y Z 8.90.7 1.300.2 P3HF-254B-4 10 Data Sheet G15368EJ4V0DS PC29M33A, 29M05A PC29M33AHB, PC29M05AHB SC-64 (MP-3) (Unit: mm) 2.30.2 1.5 +0.2 -0.1 6.50.2 5.00.2 0.50.1 2 3 7.0 MIN. 1 13.7 MIN. 1.60.2 5.50.2 4 1.10.1 0.5 +0.2 -0.1 2.3 0.75 2.3 0.5 +0.2 -0.1 PC29M33AT, PC29M05AT SC-63 (MP-3Z) (Unit: mm) 6.50.2 2.30.2 4.40.2 1.5 -0.1 +0.2 5.00.2 Note 0.50.1 2 2.50.5 1.00.5 9.50.5 3 0.4 MIN. 0.5 TYP. 1 5.60.3 Note 4 5.50.2 <R> 0.50.1 0.50.1 2.30.3 2.30.3 0.150.15 Note The depth of notch at the top of the fin is from 0 to 0.2 mm. Data Sheet G15368EJ4V0DS 11 PC29M33A, 29M05A <R> RECOMMENDED SOLDERING CONDITIONS The PC29M33A, 29M05A should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Surface Mount Device PC29MxxAT Series: SC-63 (MP-3Z) Process Infrared Ray Reflow Conditions Peak temperature: 235C or below (Package surface temperature), Symbol IR35-00-3 Reflow time: 30 seconds or less (at 210C or higher), Maximum number of reflow processes: 3 times or less. Vapor Phase Soldering Peak temperature: 215C or below (Package surface temperature), VP15-00-3 Reflow time: 40 seconds or less (at 200C or higher), Maximum number of reflow processes: 3 times or less. Partial Heating Method Pin temperature: 350C or below, P350 Heat time: 3 seconds or less (Per each side of the device). PC29MxxAT-AZ Series Note1 , PC29MxxAT-AY Series Process Infrared Ray Reflow Note2 : SC-63 (MP-3Z) Conditions Peak temperature: 260C or below (Package surface temperature), Symbol IR60-00-3 Reflow time: 60 seconds or less (at 220C or higher), Maximum number of reflow processes: 3 times or less. Partial Heating Method Pin temperature: 350C or below, P350 Heat time: 3 seconds or less (Per each side of the device). Notes 1. Pb-free (This product does not contain Pb in the external electrode.) 2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.) Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the device will be damaged by heat stress. Remark Flux: Rosin-based flux with low chlorine content (chlorine 0.2 Wt% or below) is recommended. 12 Data Sheet G15368EJ4V0DS PC29M33A, 29M05A Through-hole devices PC29MxxAHF Series, PC29MxxAHF-AZ Series Note1 PC29MxxAHB Series, PC29MxxAHB-AZ Series : Isolated TO-220 (MP-45G) Note1 Process Wave soldering , PC29MxxAHB-AY Series Note2: SC-64 (MP-3) Conditions Symbol Solder temperature: 260C or below, Flow time: 10 seconds or less. WS60-00-1 (only to leads) Partial heating method Pin temperature: 350C or below, Heat time: 3 seconds or less (Per each pin). P350 Notes 1. Pb-free (This product does not contain Pb in the external electrode.) 2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.) Caution For through-hole device, the wave soldering process must be applied only to leads, and make sure that the package body does not get jet soldered. NOTES ON USE When the PC29M33A, 29M05A are used with an input voltage that is lower than the value indicated in the recommended operating conditions, a high quiescent current flows through the device due to saturation of the transistor of the output stage. (Refer to the "IBIAS (IBIAS(S)) vs. VIN curves in TYPICAL CHARACTERISTICS"). These products have saturation protector, but a current of up to 80 mA MAX. may flow through the device. Thus the power supply on the input side must have sufficient capacity to allow this quiescent current to pass when the device starts up. REFERENCE DOCUMENTS USER'S MANUAL USAGE OF THREE TERMINAL REGULATORS Document No.G12702E REVIEW OF QUALITY AND RELIABILITY HANDBOOK Document No.C12769E INFORMATION VOLTAGE REGULATOR OF SMD Document No.G11872E SEMICONDUCTOR DEVICE MOUNT MANUAL http://www.necel.com/pkg/en/mount/index.html Data Sheet G15368EJ4V0DS 13 PC29M33A, 29M05A * The information in this document is current as of August, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1