5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
49
Boro-Silicate Glass
Silver Palladium (Ag-Pd)
High Voltage Chip Resistors - HVCR
Features
• High Voltage Chip Resistors
• Flat Chip Resistors for surface mount applications
L
w
T
C C C C
0402 0603 0805 1206 2010 2512
L (Length) Inches
(mm)
0.040 ± .002
(1.0 ± 0.05)
0.063 ± .004
(1.6 ± 0.1)
0.079 ± .006
(2.0 ± 0.15)
0.126 ± .006
(3.2 ± 0.15)
0.197 ± .006
(5.0 ± 0.15)
0.248 ± .006
(6.3 ± 0.15)
W (Width) Inches
(mm)
0.020 ± .001
(0.5 ± 0.02)
0.031 ± .004
(0.8 ± 0.1)
0.050 ± .006
(1.25 ± 0.15)
0.063 ± .006
(1.6 ± 0.15)
0.098 ± .006
(2.50 ± 0.15)
0.126 ± .006
(3.2 ± 0.15)
T (Thickness) Inches
(mm)
0.014 ± .002
(0.35 ± .05)
0.018 ± .004
(0.45 ± 0.1)
0.018 ± .006
(0.45 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
C (End Band) Inches
(mm)
0.008 ± .004
(0.2 ± 0.1)
0.012 ± .006
(0.30 ± 0.15)
0.014 ± .006
(0.35 ± 0.15)
0.020 ± .008
(0.50 ± 0.20)
0.024 ± .008
(0.60 ± 0.20)
0.024 ± .008
(0.60 ± 0.20)
1
2
3
6
5
4
Description
1 Substrate Alumina
2 Resistive element Ruthenium Oxide (RuO2)
3 Protective coating
4 Inner termination
5 Inner Plating Nickel (Ni)
6 Outer Plating Solder Plating,
100% matte Tin (Sn)
All components in this section are RoHS compliant per the EU directives and definitions.
For standard resistance values, please see “EIA Standard Resistance Values” on page 66.
Dimensions
Structure
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
50
Operating Temp. Range is -55°C to +155°C • DC Resistance Value of zero ohm is 50m ohms max.
*E = P R where E = Rated Voltage (V); P = Rated Power (P) and R = Nominal Resistance (W).
Series Power Rating
at 70°C Max. Working Voltage Max. Overload
Voltage
T.C.R.
Temperature Coefficient
of Resistance (PPM/˚C)
Resistance Range
HVCR0402-16W 0.063W *E = P R or 100V
whichever is less
200V 10W – 1 Meg W: ±100
1.02MegW – 10 Meg W: ±200 10W - 10 Meg W
HVCR0603-10W 0.10W *E = P R or 100V
whichever is less
200V 10W – 1 Meg W: ±100
1.02 Meg W – 10 Meg W: ±200 10W - 10 Meg W
HVCR0805-8W 0.125W *E = P R or 300V
whichever is less
600V 10W – 1 Meg W: ±100
1.02 Meg W – 10 Meg W: ±200 10W - 10 Meg W
HVCR1206-4W 0.25W *E = P R or 500V
whichever is less
1000V 10W – 1 Meg W: ±100
1.02 Meg W – 10 Meg W: ±200 10W - 10 Meg W
HVCR2010-2W 0.50W *E = P R or 500V
whichever is less 1000V 10W – 1 Meg W: ±100
1.02 Meg W – 10 Meg W: ±200 10W - 10 Meg W
HVCR2512-1W 1.00W *E = P R or 500V
whichever is less
1000V 10W – 1 Meg W: ±100
1.02 Meg W – 10 Meg W: ±200 10W - 10 Meg W
Specifications
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
51
Rated power (%)
30 50 70 90 110 130 150 170
Ambient temperature (˚C)
120
100
80
60
40
20
0
Derating Curve
High Voltage Chip Resistors - HVCR
3 DIGIT
(J TOL.)
e.g. 2R2=2.2W
103=10KW
4 DIGIT
(F TOL.)
e.g. 10R2=10.2W
1002=10kW
103
PACKAGING
T: TAPE
Standard Chip Resistor Termination
finish is 100% matte Tin (Sn).
T HVCR1206-4W
SERIES
J
TOLERANCE AT 25°C
F: ± 1%
J: ± 5% (No Tolerance
specified for the Zero
Ohm)
—
0603 — 1% Chip Resistors may not be marked. (For HVCR Series)
Please consult your salesperson if marking is required. (See the data sheet on Marking Codes) • E-24 Standard Resistance values
that are available in 1%, may be marked with the standard 3-digit code identifier or an alpha numeric code. For the alpha numeric
marking see page 67 for details.
• NOTE: See page 66 for Standard Resistance Values
• NOTE: Other nominal resistance values may also be available, please contact your sales representative for further information.
3 zeros Jumper
All components in this section are RoHS compliant per the EU directives and definitions.
For standard resistance values, please see “EIA Standard Resistance Values” on page 66.
How To Order
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
52
Item Test Basis: JIS-C-5202 Specification Requirements Typical
Short-time Overload 2.5 x rated voltage DC for 5 sec. ±1% +0.5W, no arc evidence within ±0.4%
Load Life 70°C, rated voltage for 1.5 hrs. <1 Meg ±2% +0.1W; > 1 Meg ±3% —
on/0.5 hr. off for 1000 hrs.
Resistance to Soldering Heat 260°C for 10 seconds ±1% +0.05W, no mechanical damage —
Temperature Cycling –55 ~ +125° C, 5 cycles. ± 1.0% —
Solderability 230°C, 3 seconds, flux applied 95% minimum coverage more than 97-98%
Dry Heat Resistance +125°C for 1,000 hours ±3% +0.1W, no mechanical damage within ±0.5%
Pull Terminal Strength 500G load for 30 seconds ±1% +0.05W, no mechanical damage within ±0.2%
PCB Terminal Strength 1/45mm bend for 10 seconds ±1% +0.05W, no mechanical damage within ±0.2%
Moisture Resistance,
-55°C to +125°C, 5 cycles ±1% +0.05W, no mechanical damage within ±0.2%
Thermal Shock
Moisture Load Life
40°C, 95% R.H., 1.5 hr. on,
0.5 hr. off, 1,000 hours <1 Meg ±2% +0.1W; > 1 Meg ±3% —
Insulation Resistance
Max. Overload Voltage
for 1 minute ≥ 10 G more than 10 Meg
Voltage Proof
1.5 times Rated Voltage
for 1 minute No breakdown or flashover —
Low Temperature Exposure -55°C for 1,000 hours ±3% +0.1W, no mechanical damage within ±0.5%
Characteristics
