SMD Aluminum Electrolytic Capacitors CVK Features: 4 ~ 10, 105, 2,000 ~ 5,000 hours assured Designed for surface mounting on high density PC board. RoHS Compliance SPECIFICATIONS Items Operating Temperature Range Capacitance Tolerance Performance -55 ~ +105 (at 120Hz, 20) 20% I = 0.01CV or 3 (A) whichever is greater (after 2 minutes) Where, C= rated capacitance in F. V = rated DC working voltage in V. Leakage Current (at 20) Rated Voltage 46.3 810 Dissipation Factor (Tanat 120Hz, 20) 6.3 0.32 0.30 10 0.28 0.26 16 0.24 0.22 25 0.18 0.16 35 0.15 0.13 Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 Impedance 4 3 2 2 Z(-25)/Z(+20) Ratio 8 5 4 3 Z(-40)/Z(+20) Low Temperature Characteristics (at 120Hz) 50 0.14 0.12 35 2 3 50 2 3 Test Time 2,000 Hrs(4 ~ 6.3) 5,000 Hrs(8 ~ 10) 6.3V Within 30% of initial value Within 30% of initial value Capacitance 10 ~ 16V Within 25% of initial value Within 30% of initial value Change 25 ~50V Within 20% of initial value Within 30% of initial value Dissipation 6.3 ~ 16V Less than 300% of specified value Less than 300% of specified value Factor 25 ~ 50V Less than 200% of specified value Less than 300% of specified value Leakage Current Within specified value Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20after the rated voltage applied for 2,000/5,000 hrs at 105. Load Life Test Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test. Freq.(Hz) V.DC(V) Under 16 25 ~ 35 50 ~ 63 100 Ripple Current & Frequency Multipliers Standards 50, 60 120 1K 10K up 0.8 0.8 0.8 0.7 1.0 1.0 1.0 1.0 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Satisfies Characteristic W of JIS C 5101-1, -18 LEAD SPACING AND DIAMETER DIAGRAM OF DIMENSIONS L A B C W P0.2 4 5.70.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.70.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.70.3 6.3 6.3 2.7 0.5 to 0.8 2.0 8 100.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 100.5 10.4 10.4 3.3 0.7 to 1.1 4.7 Dimension: D x L(mm) Ripple Current: mA/rms at 120 Hz,105C DIMENSION & PERMISSIBLE RIPPLE CURRENT V.DC F 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 Content 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 6.3V (0J) DxL 4x5.7 5x5.7 5x5.7 6.3x5.7 8x10 8x10 10x10 10V (1A) Unit: mm D 16V (1C) 25V (1E) 35V (1V) mA DxL mA DxL mA DxL mA DxL mA 13 30 36 61 178 178 324 4x5.7 5x5.7 5x5.7 6.3x5.7 8x10 8x10 10x10 10x10 13 30 30 43 178 178 324 324 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 8x10 8x10 10x10 10x10 13 16 30 40 50 178 178 324 324 4x5.7 5x5.7 6.3x5.7 6.3x5.7 8x10 8x10 8x10 10x10 13 23 38 48 178 178 240 324 4x5.7 5x5.7 6.3x5.7 8x10 8x10 10x10 10x10 13 25 50 178 178 324 324 50V (1H) DxL 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 8x10 8x10 8x10 10x10 mA 2 3 4 5 10 16 18 22 30 178 178 178 160