AH7 NV (AH7) SWITCHES HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE FEATURES * Extra long-life spring mechanism --More than 107 mechanical operations, 105 electrical * High contact rating of 15 Amps with an operating force of only 200 g 7.05 oz * Safety insulation guard types available * Available in a wide operating force and capacity range * UL/CSA/VDE/SEMKO approved TYPICAL APPLICATIONS * Home appliances * Vending machines * Amusement and communication equipment * Copiers * General industrial machines ORDERING INFORMATION Ex. AH7 Type of switch Contact arrangement Terminal Actuators 1: Bottom COM *(1: Solder terminal 0: Pin plunger terminal SPDT with right-hand 1: Short hinge 2: Bottom COM guard) lever terminal SPST-NC *(2: Solder terminal 2: Hinge lever 3: Bottom COM without guard) 3: Long hinge terminal SPST-NO 4: .187 Quick-connect/ lever 4: Side COM solder terminal with 4: Simulated terminal SPDT right-hand guard roller lever 5: Side COM 5: .187 Quick-connect/ 5: Short roller terminal SPST-NC solder terminal lever 6: Side COM without guard 6: Roller lever terminal SPST-NO *(8: .250 Quick-connect 8: Wire lever terminal) Remark: Please consult us for * marked product. Operating force by pin plunger (max.) NV switch Type Standard type .187 Quick-connect/ Heat resistant solder terminal without guard type Solder terminal without guard (Standard) .250 Quick-connect terminal Low-level circuit type (Standard) Heat resistant type (Low-level circuit type) 0.15N 0.25N 0.49N 0.98N 1.96N 3.92N {15gf} {25gf} {50gf} {100gf} {200gf} {400gf} -- -- 360 460 5 7 -- -- 356 -- -- -- -- 361 162 262 362 456 555 755 461 561 -- 462 562 -- *(355) *(455) TERMINALS 1. .187 Quick-connect/solder terminal 1) Bottom COM terminal 3.4 .134 (10) t=0.5 .020 (.394) 3-.187 Quick-connect terminal 2) Side COM terminal mm inch 2. Solder terminal 1) Bottom COM terminal 3.4 .134 t=0.5 (6.5) .020 (.256) 2)Terminal portion dimensions 6.5 .256 4 .157 (10) (.394) 3) Terminal portion dimensions 3.2* .126* 6.35 .250 4.750.1 6.4 .187.004 .252 2.4 dia. 1.6 dia. .094 .063 * Indicating for the center of 1.6 dia. .063 dia. 66 2.4 dia. .094 7 .276 3. .250 Quick-connect terminal 1) Bottom COM terminal 2.35 .093 3.7 .146 6 (11) t=0.8 .031 (.433) 3-.250 Quick-connect terminal 2) Terminal portion dimensions 3.4 .134 8.05 .317 1.65 dia. .065 6.350.1 .250.004 AH7 PRODUCT TYPES 1. Standard type Bottom COM terminal .187 Quick-connect/solder terminal without guard Actuators Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, max. 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} SPDT AH7150360 AH7150460 AH71505 AH71507 AH7151360 AH7151460 AH71515 AH71517 AH7152360 AH7152460 AH71525 AH71527 AH7153360 AH7153460 AH71535 AH71537 AH7154360 AH7154460 AH71545 AH71547 AH7155360 AH7155460 AH71555 AH71557 AH7156360 AH7156460 AH71565 AH71567 Contact arrangement SPST-NC AH7250360 AH7250460 AH72505 AH72507 AH7251360 AH7251460 AH72515 AH72517 AH7252360 AH7252460 AH72525 AH72527 AH7253360 AH7253460 AH72535 AH72537 AH7254360 AH7254460 AH72545 AH72547 AH7255360 AH7255460 AH72555 AH72557 AH7256360 AH7256460 AH72565 AH72567 SPST-NO AH7350360 AH7350460 AH73505 AH73507 AH7351360 AH7351460 AH73515 AH73517 AH7352360 AH7352460 AH73525 AH73527 AH7353360 AH7353460 AH73535 AH73537 AH7354360 AH7354460 AH73545 AH73547 AH7355360 AH7355460 AH73555 AH73557 AH7356360 AH7356460 AH73565 AH73567 Remarks: 1. When ordering solder terminal, change the fifth digit of part number from "5" to "2" and delete suffix "60" from the part no. 2. When ordering 2.94N{300gf} types, insert the number "6" at the seventh digit of part no. instead of "360", "460", "5" or "7". 3. When ordering international standard approved types, please attach the following number to the part no. 9: UL/CSA 6x103 rated 4: UL/CSA 105 rated 8: VDE/SEMKO 7: UL TV rating 67 AH7 Side COM terminal .187 Quick-connect/solder terminal with right-hand guard Actuators Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, max. 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} SPDT AH7440360 AH7440460 AH74405 AH74407 AH7441360 AH7441460 AH74415 AH74417 AH7442360 AH7442460 AH74425 AH74427 AH7443360 AH7443460 AH74435 AH74437 AH7444360 AH7444460 AH74445 AH74447 AH7445360 AH7445460 AH74455 AH74457 AH7446360 AH7446460 AH74465 AH74467 Contact arrangement SPST-NC AH7540360 AH7540460 AH75405 AH75407 AH7541360 AH7541460 AH75415 AH75417 AH7542360 AH7542460 AH75425 AH75427 AH7543360 AH7543460 AH75435 AH75437 AH7544360 AH7544460 AH75445 AH75447 AH7545360 AH7545460 AH75455 AH75457 AH7546360 AH7546460 AH75465 AH75467 Remarks: 1. When ordering 2.94N{300gf} types, insert the number "6" at the seventh digit of part no. 2. When ordering international standard approved types, please attach the following number to the part no. 9: UL/CSA 6x103 rated 4: UL/CSA 105 rated 8: VDE/SEMKO (Not every part no. are approved. Please consult us.) 7: UL TV rating 68 SPST-NO AH7640360 AH7640460 AH76405 AH76407 AH7641360 AH7641460 AH76415 AH76417 AH7642360 AH7642460 AH76425 AH76427 AH7643360 AH7643460 AH76435 AH76437 AH7644360 AH7644460 AH76445 AH76447 AH7645360 AH7645460 AH76455 AH76457 AH7646360 AH7646460 AH76465 AH76467 AH7 Side COM terminal .187 Quick-connect/solder terminal without guard Actuators Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, max. 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} SPDT AH7450360 AH7450460 AH74505 AH74507 AH7451360 AH7451460 AH74515 AH74517 AH7452360 AH7452460 AH74525 AH74527 AH7453360 AH7453460 AH74535 AH74537 AH7454360 AH7454460 AH74545 AH74547 AH7455360 AH7455460 AH74555 AH74557 AH7456360 AH7456460 AH74565 AH74567 Contact arrangement SPST-NC AH7550360 AH7550460 AH75505 AH75507 AH7551360 AH7551460 AH75515 AH75517 AH7552360 AH7552460 AH75525 AH75527 AH7553360 AH7553460 AH75535 AH75537 AH7554360 AH7554460 AH75545 AH75547 AH7555360 AH7555460 AH75555 AH75557 AH7556360 AH7556460 AH75565 AH75567 SPST-NO AH7650360 AH7650460 AH76505 AH76507 AH7651360 AH7651460 AH76515 AH76517 AH7652360 AH7652460 AH76525 AH76527 AH7653360 AH7653460 AH76535 AH76537 AH7654360 AH7654460 AH76545 AH76547 AH7655360 AH7655460 AH76555 AH76557 AH7656360 AH7656460 AH76565 AH76567 Remarks: 1. When ordering 2.94N{300gf} types, insert the number "6" at the seventh digit of part no. 2. When ordering international standard approved types, please attach the following number to the part no. 9: UL/CSA 6x103 rated 4: UL/CSA 105 rated 8: VDE/SEMKO (Not every part no. are approved. Please consult us.) 7: UL TV rating 69 AH7 2. Heat resistant type (Standard) .187 Quick-connect/solder terminal without guard Actuators Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, max. 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 3.92N{400gf} 0.59N{60gf} 1.08N{110gf} 2.16N{220gf} 4.12N{420gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 2.35N{240gf} 0.15N{15gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 2.35N{240gf} 0.59N{60gf} 1.08N{110gf} 2.16N{220gf} 4.12N{420gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 2.35N{240gf} Bottom COM terminal AH7150356 AH7150456 AH7150555 AH7150755 AH7151356 AH7151456 AH7151555 AH7151755 AH7152356 AH7152456 AH7152555 AH7152755 AH7153356 AH7153456 AH7153555 AH7153755 AH7154356 AH7154456 AH7154555 AH7154755 AH7155356 AH7155456 AH7155555 AH7155755 AH7156356 AH7156456 AH7156555 AH7156755 3. Heat resistant type (Low-level circuit type) Side COM terminal AH7450356 AH7450456 AH7450555 AH7450755 AH7451356 AH7451456 AH7451555 AH7451755 AH7452356 AH7452456 AH7452555 AH7452755 AH7453356 AH7453456 AH7453555 AH7453755 AH7454356 AH7454456 AH7454555 AH7454755 AH7455356 AH7455456 AH7455555 AH7455755 AH7456356 AH7456456 AH7456555 AH7456755 Remarks: 1. When ordering solder terminal, change the fifth digit of part number from "5" to "2". (ex.) AH7150555AH7120555 2. When ordering 2.94N{300gf} types, insert the number "655" at the seventh digit of part no. instead of "356", "456", "555" or "755". 3. Please consult us for NC and NO types. 4. When ordering international standard approved types, please attach the following number to the part no. 9: UL/CSA 6x103 rated 8: VDE/SEMKO 7: UL TV rating 70 Actuators Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Wire lever Operating force, max. 0.15N{15gf} 0.25N{25gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 0.59N{60gf} 1.08N{110gf} 2.16N{220gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 0.15N{15gf} 0.29N{30gf} 0.59N{60gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 0.59N{60gf} 1.08N{110gf} 2.16N{220gf} 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 0.098N{10gf} 0.15N{15gf} Bottom COM terminal AH7150162 AH7150262 AH7150362 AH7150462 AH7150562 AH7151362 AH7151462 AH7151562 AH7152362 AH7152462 AH7152562 AH7153362 AH7153462 AH7153562 AH7154362 AH7154462 AH7154562 AH7155362 AH7155462 AH7155562 AH7156362 AH7156462 AH7156562 AH7158162 AH7158262 Side COM terminal AH7450162 AH7450262 AH7450362 AH7450462 AH7450562 AH7451362 AH7451462 AH7451562 AH7452362 AH7452462 AH7452562 AH7453362 AH7453462 AH7453562 AH7454362 AH7454462 AH7454562 AH7455362 AH7455462 AH7455562 AH7456362 AH7456462 AH7456562 AH7458162 AH7458262 Remarks: 1. Please consult us for NC and NO types. 2. As for International standard, please refer to the "Information". AH7 SPECIFICATIONS 1. Contact rating Contact Operating force by pin plunger (max.) 0.49N {50gf} 0.98N {100gf} 1.96N, 2.94N, 3.92N {200gf, 300gf, 400gf} 0.15N {15gf} 0.25 to 1.96N {25 to 200gf} Silver alloy Gold clad Rating (resistive load) 5A 250V AC, 0.5A 125V DC 10A 250V AC, 0.6A 125V DC 15A 250V AC, 0.6A 125V DC 1A 250V AC 3A 250V AC * Gold clad low level circuit type (resistive load) 6V DC 5mA 12V DC 2mA 24V DC 1mA 2. Characteristics Contact Operating force by pin plunger (max.) Expected life (min.) 0.49N {50gf} 0.98N {100gf} Mechanical (at O.T. rated) Electrical (at O.T. min.) Insulation resistance (min.) Between terminals Dielectric Between terminals and other strength exposed metal parts Between terminals and ground Contact resistance (Initial) Vibration resistance (by pin plunger types) Shock resistance (by pin plunger types) Min. Allowable operating speed Max. operating cycle rate Ambient temperature Ambient humidity Unit weight Silver alloy 1.96N, 2.94N, 3.92N 0.15N {200, 300, 400gf} {15gf} Min. 107 (at 60 cpm) 0.25N {25gf} 1.96N {200gf} Min. 105 (at rated load, 20 cpm) Min. 100M (at 500V DC) 1,000V AC for 1min. 1,500V AC for 1min. 1,500V AC for 1min. Max. 50m (by voltage drop at 1A 6 to 8V DC) Max. 50 m (by voltage drop at 1A 6 to 8V DC) 10 to 55 Hz at amplitude of 0.75mm (Contact opening: max. 1msec.) 196m/s2 294m/s2 98m/s2 196m/s2 98m/s2 {10G} 294m/s2 {30G} {10G} {20G} {20G} {30G} 0.1 to 1,000mm/sec. 600/min. 300/min. 600/min. -25C to +80C -13F to +176F (No freezing below 0C) Max. 85% R.H. 8g .28oz 3. Operating characteristics 1) Pin plunger Seventh digit of part number 1 2 3 4 5 6 7 Gold clad 0.49N 0.98N {50gf} {100gf} mm inch O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.15N{15gf} 0.25N{25gf} 0.49N{50gf} 0.98N{100gf} 1.96N{200gf} 2.94N{300gf} 3.92N{400gf} 0.029N{3gf} 0.059N{6gf} 0.12N{12gf} 0.25N{25gf} 0.49N{50gf} 0.74N{75gf} 0.98N{100gf} 1.6 .063 1.6 .063 1.6 .063 1.6 .063 1.6 .063 1.6 .063 1.6 .063 0.8 .031 0.8 .031 0.4 .016 0.4 .016 0.4 .016 0.4 .016 0.4 .016 0.8 .031 0.8 .031 0.8 .031 0.8 .031 0.8 .031 0.8 .031 0.8 .031 14.70.6 .579.024 14.70.6 .579.024 14.70.6 .579.024 14.70.6 .579.024 14.70.6 .579.024 14.70.6 .579.024 14.70.6 .579.024 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.59N{60gf} 1.08N{110gf} 2.16N{220gf} 3.14N{320gf} 4.12N{420gf} 0.098N{10gf} 0.20N{20gf} 0.39N{40gf} 0.59N{60gf} 0.78N{80gf} 1.6 .063 1.6 .063 1.6 .063 1.6 .063 1.6 .063 0.5 .020 0.5 .020 0.5 .020 0.5 .020 0.5 .020 0.8 .031 0.8 .031 0.8 .031 0.8 .031 0.8 .031 15.30.8 .602.031 15.30.8 .602.031 15.30.8 .602.031 15.30.8 .602.031 15.30.8 .602.031 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 1.77N{180gf} 2.35N{240gf} 0.049N{5gf} 0.098N{10gf} 0.20N{20gf} 0.29N{30gf} 0.39N{40gf} 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 15.31.2 .602.047 15.31.2 .602.047 15.31.2 .602.047 15.31.2 .602.047 15.31.2 .602.047 2) Short hinge lever Seventh digit of part number 3 4 5 6 7 3) Hinge lever Seventh digit of part number 3 4 5 6 7 71 AH7 4) Long hinge lever Seventh digit of part number 3 4 5 6 7 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.15N{15gf} 0.29N{30gf} 0.59N{60gf} 0.88N{90gf} 1.18N{120gf} 0.025N{2.5gf} 0.049N{5gf} 0.098N{10gf} 0.15N{15gf} 0.39N{40gf} 7.5 .295 7.5 .295 7.5 .295 7.5 .295 7.5 .295 2.2 .087 2.2 .087 2.2 .087 2.2 .087 2.2 .087 2.2 .087 2.2 .087 2.2 .087 2.2 .087 2.2 .087 15.32.6 .602.102 15.32.6 .602.102 15.32.6 .602.102 15.32.6 .602.102 15.32.6 .602.102 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 1.77N{180gf} 2.35N{240gf} 0.049N{5gf} 0.098N{10gf} 0.20N{20gf} 0.29N{30gf} 0.39N{40gf} 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 18.51.2 .728.047 18.51.2 .728.047 18.51.2 .728.047 18.51.2 .728.047 18.51.2 .728.047 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.59N{60gf} 1.08N{110gf} 2.16N{220gf} 3.14N{320gf} 4.12N{420gf} 0.098N{10gf} 0.20N{20gf} 0.39N{40gf} 0.59N{60gf} 0.78N{80gf} 1.6 .063 1.6 .063 1.6 .063 1.6 .063 1.6 .063 0.5 .020 0.5 .020 0.5 .020 0.5 .020 0.5 .020 0.8 .031 0.8 .031 0.8 .031 0.8 .031 0.8 .031 20.70.8 .815.031 20.70.8 .815.031 20.70.8 .815.031 20.70.8 .815.031 20.70.8 .815.031 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.29N{30gf} 0.59N{60gf} 1.18N{120gf} 1.77N{180gf} 2.35N{240gf} 0.049N{5gf} 0.098N{10gf} 0.20N{20gf} 0.29N{30gf} 0.39N{40gf} 3.2 .126 3.2 .126 3.2 .126 3.2 .126 3.2 .126 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 1.2 .047 20.71.2 .815.047 20.71.2 .815.047 20.71.2 .815.047 20.71.2 .815.047 20.71.2 .815.047 O.F. max. R.F. min. P.T. max. M.D. max. O.T. min. O.P. max. 0.098N{10gf} 0.15N{15gf} 0.010N{1gf} 0.020N{2gf} 3.5 .138 3.5 .138 2 .079 2 .079 1.2 .047 1.2 .047 15.51.4 .610.055 15.51.4 .610.055 5) Simulated roller lever Seventh digit of part number 3 4 5 6 7 6) Short roller lever Seventh digit of part number 3 4 5 6 7 7) Roller lever Seventh digit of part number 3 4 5 6 7 8) Wire lever Seventh digit of part number 1 2 DIMENSIONS mm inch 1. Pin plunger Bottom COM terminal (Guardless) .187 Quick-connect/Solder terminal (P.T.) 1.6 max. .063 2.8 .110 20.20.3 .795.012 2.8 .110 (O.P.) 14.70.6 +0.1 .579.024 10.3+.004 .406 3.1 +0.25 -0.05 .122 +.010 -.002 2.8 .110 72 3.1 +0.25 -0.05 dia. hole .122 +.010 -.002 dia. hole Solder terminal 3.95 .156 20.20.3 .795.012 2.8 .110 (O.P.) 14.70.6 10.3+0.1 .579.024 .406+.004 15.9 .626 0.5 19.3 .020 .760 3.40.15 .134.006 22.20.1 .874.004 27.8 1.094 37.80.5 1.488.020 (P.T.) 1.6 max. .063 2.8 .110 10.3 .406 3.1 +0.25 -0.05 .122 +.010 -.002 2.8 .110 3.1 +0.25 -0.05 dia. hole .122 +.010 -.002 dia. hole 3.95 .156 15.9 .626 19.3 .760 3.40.15 .134.006 22.20.1 .874.004 27.8 1.094 37.30.5 1.469.020 10.3 .406 AH7 Side COM terminal (with right-hand guard) mm inch .187 Quick-connect/Solder terminal (P.T.) 1.6 max. .063 20.20.3 .795.012 2.8 .110 2.8 .110 (O.P.) 14.70.6 10.3+0.1 .579.024 .406+.004 3.1 +0.25 -0.05 .122 +.010 -.002 2.8 .110 3.95 .156 3.1 +0.25 -0.05 dia. hole .122 +.010 -.002 dia. hole 16.1 .634 15.9 .626 17.7 .697 3.40.15 .134.006 22.20.1 .874.004 27.8 1.094 37.80.5 1.488.020 38.3 1.508 10.3 .406 0.5 .020 1.0 .039 Side COM terminal (Guardless) .187 Quick-connect/Solder terminal (P.T.) 1.6 max. .063 20.20.3 .795.012 2.8 .110 2.8 .110 (O.P.) 14.70.6 10.3+0.1 .579.024 .406+.004 3.1 +0.25 -0.05 .122 +.010 -.002 2.8 .110 3.1 +0.25 -0.05 dia. hole .122 +.010 -.002 dia. hole 3.95 .156 16.1 15.9 .634 .626 3.40.15 .134.006 22.20.1 .874.004 27.8 1.094 37.80.5 1.488.020 10.3 .406 2. Short hinge lever (P.T.) 1.6 max. .063 22.10.5 .870.020 5 .200 (O.P.) 15.30.8 .602.031 3. Hinge lever (P.T.) 3.2 max. .126 35.80.5 1.409.020 5 .200 (O.P.) 15.31.2 .602.047 4. Long hinge lever (P.T.) 7.5 max. .295 59.50.5 2.343.020 5 .200 (O.P.) 15.32.6 .602.102 73 AH7 5. Simulated roller lever mm inch (P.T.) 3.2 max. .126 5 .200 32.80.5 1.291.020 3R .118R (O.P.) 18.51.2 .728.047 6. Short roller lever (P.T.) 1.6 max. .063 20.60.5 .811.020 4.9 .193 4.8 dia. .189 (O.P.) 20.70.8 .815.031 7. Roller lever (P.T.) 3.2 max. .126 34.20.5 1.346.020 4.9 .193 4.8 dia. .189 (O.P.) 20.71.2 .815.047 8. Wire lever (P.T.) 3.5 max. .138 37.20.6 1.465.024 5 .200 dia. (O.P.) 0.8 .855 15.51.4 .610.055 NOTES 1. Use 3.0mm mounting screws to mount switches with less than a 5 kg-cm torque. Use of screw washers or adhesive lock is recommended. Before mounting, check insulation distance between terminals as well as between terminals and ground. If enough distance is not secured, it is recommended to use insulation material in mounting. Set 70 to 100% overtravel in actual use. When the operation object is in the free position, force should not be applied directly to the actuator or to the pin plunger. Also force should be applied to the pin plunger from vertical direction to the switch. 74 2. When specifying NV switches, allow 20% to the listed operating and release forces. 3. Hand soldering should be accomplished in less than 5 seconds, preferably with a 60 watt iron. Avoid contacting the switch case with the soldering iron. 4. Low-level circuit type is recommended for using under low-level current and voltage. 5. Avoid using NV switches in the following conditions: * In corrosive gases, such as hydrogen sulfide. * In flammable or explosive gases such as gasoline or thinner etc. * In a dusty environment. * In an ambient temperature under -25C -13F or over 80C 176F. * In an ambient humidity over 85% R.H..