Shrouded Headers 2.54 mm (0.100 in.) Ordering Data Base number specifies connector style oo) 2 Number of positions (see table) Plating Options Replace X in dash number with: 7- 1.27 pm (50 pin) Ni under 0.76 um (30 pin) gold 3- 1.27 pm (50 pin) Ni under 1.27 um (50 pin) gold 5- 1.27 um (50 vin) Ni under 0.76 ym (30 pin) GXT A- 1.27 ym (50 pin) Ni under all; with .76 um (30 pin) Au OOOOO-xXyvyvyvz + B - 1.27 um (50 pin) Ni under ali; with .76 pm (30 pin) GXT on contact area, and SnPb on PCB interface. Au flash all other areas.* C - 1.27 ym (50 vin) Ni under all; with 0.76 pm (30 pin.) Au on contact area, and SnPb on PCB interface. Lo ogeit Length D - 1.27 ym (50 pin) Ni under all; with .76 pm (30 pin) GXT on contact area, and SnPb on PCB interface. .76 ym (30 pin) GXT on tail side contact area, Au flash all other areas. Note, Available on C & D Tail Lengths only. Replace Z in dash number with: S - 2.54 mm (0.100in) J- 3.05 mm (0.120in) A - 4.50 mm (0.177in) H - 4.57 mm (0.180in) G - 3.05 mm (0.250in) C - 13.54 mm (0.533in} D - 18.63 mm (0.733in) 0.76 um (30 pin) Au on tail side contact area. Au flash all other areas. Note, Available on C & D Tail Lengths only on contact area, and SnPb on PCB interface. Au flash all other areas.* *Available on A & G Tail Lengths only Len a _ Base Number Option Menu. . va oe Base Number Style Platings Available Tail Length 50009 (1) Press Fit Pins, Vertical 1,3,5 A,G,C,D 50760 (1) Press Fit Pins, Vertical, Duplex Plating A, B,C, D A,G,C,D 50015 (2) Solder Tail Pins, Vertical 1,3,5 J,A,G,C,D i (N35 H, J ail. ight Angie, Duplex Plating A s Shroud, Pinless Header, Self-Retaining x x Shroud, Pinless Header, Slip On Xx x (1) Request Select Load Worksheet, 50807 for FMLB options. (2) Request Select Load Worksheet, 50810 for FMLB options. Dash Number | Dimensions q Number of | Dash Number A B C. Positions (XYYYZ) - - - in. mm cing 40 X040Z 1.450 22.86 0.900 44 X044Z 1.550 25.40 1.000 48 1.650 27.94 1.100 BZ es XOB22 4.760 | 30.48 1.200 BBO dos X08 4.850... 33.02 1.300 BO x 1.950" 35.56 1.400 64 2.050 38.10 1.500 68 2.150 40.64 1.606 72 2.250 43.18 1.700 oe 8 2.350. 45.72 | 1.800 80 2.450. | 48.265 | 1,900 Be 23550 ' 80.80 2.000 88 2.650 53.34 2.100 92 2.750 55.88 2.200 96 2.850 58.42 2.300 100 X100Z | 3.250 74,93 2.950 60.96 2.400 Ordering data shown is for our standard product offering. For non-standard or custom products, contact your authorized Berg Electronics representative. M 9005431 0002656 125 17-12 HPC Berg Electronics 1-800-237-2374Shrouded Headers 2.54 mm (0.100 in.) Ordering Data (cont'd) Number of | Dash Number [ A Dimensions C Positions (XYYYZ) . - - .. - 4 _ mm in. mm in. mm in. 104 X104Z 85.09 3.350 77.47 3.050 63.50 2.500 108 X108Z 87.63 3.450 80.01 3.150 66.04 2.600 112 X112Z 90.17 3.550 82.55 3.250 68.58 2.700 116 X116Z 92.71 3.650 85.09 3.350 7112 2.800 120 X120Z 95.25 3.750 87.63 3.450 73.66 2.900 124 X124Z 97.79 3.850 90.17 3.550 76.20 3.000 128 X128Z 100.33 3.950 92.71 3.650 78.74 3.100 132 X132Z 102.87 4.050 95.25 3.750 81.28 3.200 136 X136Z 105.41 | 4.150 97.79 3.850 83.82 3.300 140 X140Z 107.95 4.250 100.33 3.950 86.36 3.400 144 X144Z 110.49 4.350 102.87 4.050 88.90 3.500 148 X148Z 113.03 4.450 105.41 4.150 91.44 3.600 152 X1522 115.57 4.550 107.95 4.250 93.98 3.700 156 X156Z 118.11 4.650 110.49 4.350 96.52 3.800 160 X160Z 120.65 4.750 113.03 4.450 99.06 3.900 164 X164Z 123.19 4,850 415.57 4.550 101.60 4.000 168 X168Z 125.73 4.950 418.11 4.650 104.14 4.100 172 X1722 128.27 .050 120.65 4,750 106.68 4.200 176 X176Z 130.81 5.150 123.19 4.850 109.22 4.300 180 X180Z 133.35 5.250 125.73 4.950 111.76 4.400 184 X184Z 135.89 5.350 128.27 5.050 114.30 4.500 188 X188Z 138.43 5.450 130.81 5.150 116.84 4.600 192 X192Z 140.97 5.550 133.35 5.260 119.38 4.700 196 X196Z 443.51 5.650 135.89 5.350 121.92 4.800 200 X200Z 146.05 5.750 138.43 5.450 124.46 4.900 204 X204Z 148.59 5.850 140.97 5.550 127.00 5.000 208 X208Z 151.13 5.950 143.51 5.650 129.54 5.100 212 X212Z 153.67 6.050 146.05 5.750 132.08 5.200 216 X216Z 156.21 6.150 148.59 5.850 134.62 5.300 220 X220Z 168.75 6.250 151.13 5.950 137.16 5.400 224 X224Z 161.29 6.350 153.67 6.050 139.70 5.500 228 X228Z 163.83 6.450 156.21 6.150 142.24 5.600 232 X232Z 166.37 6.550 158.75 6.250 144.78 5.700 236 X236Z 168.91 6.650 161.29 6.350 147.32 5.800 240 X240Z 171.45 6.750 163.83 6.450 149.86 5.900 244 X244Z 173.99 6.850 166.37 6.550 152.40 6.000 248 X248Z 176.53 6.950 168.91 6.650 154.94 6.100 252 X252Z 179.07 7.050 171.45 6.750 157.48 6.200 256 X256Z2 181.61 7.150 173.99 6.850 160.02 6.300 260 X260Z 184.15 7.250 176.53 6.950 162.56 6.400 264 X264Z 186.69 7.350 179.07 7.050 165.10 6.500 268 X268Z 189.23 7.450 181.61 7.150 167.64 6.600 272 X272Z 191.77 7.550 184.15 7.250 170.18 6.700 276 | X276Z 194.31 7.650 186.69 7.350 172.72 6.800 280 X280Z 196.85 7.750 189.23 7.450 175.26 6.900 284 X284Z | 199.39 7.850 | 491.77 7.550 177.80 7.000 288 X288Z 201.93 7.950 194.31 | 7,650 180.34 7.100 292 X292Z 204.47 | 8.050 | 196.85, 7.750 182.88 7.200 296 X296Z 207.01 8.150 | 199.39 7.850 185.42 7.300 300 X300Z 209.55 8.250 | 201.93 7.950 187.96 7.400 304 X304Z 212.09 8.350 | 204.47 8.050 190.50 7.500 308 X308Z 214,63 8.450 207.01 8.150 193.04 7.600 312 X312Z 217.17 8.550 209.55 8.250 195.58 7.700 316 X316Z 219.71 8.650 212.09 8.350 198.12 7.800 320 X320Z 222.25 8.750 214.63 8.450 200.66 7.900 Ordering data shown is for our standard product offering. For non-standard or custom products, contact your authorized Berg Electronics representative. Berg Electronics 1-800-237-2374 M@ 9005411 0002697? Obl HPC 17-13Shrouded Headers 2.54 mm (0.100 in.) 4-Row Vertical and Right-Angle Headers Compliant Press-Fit or Solder-Tail Pins Description No Guide Hole TAL LENGTH = fe fa i fa Ye 4 y l .80 [.220} -64 [.025} +1 L. 3.62 [.143]} SC. PINS R/A STYLE, SOLDER TAIL PINS ONLY Otel A Ow B bu c : i doo) |DonoooDoooeooosAaoeoe oe coo ape (588) Bf oD oO, oseooeo0OD oc oD oreo oe ooo oO ao o SS 86 (586) ROD) Poa ocecocoatvoapaocoosoaenoeoeoes oo 0 He v ooo jpeeaecaoecanocesaeoooae oaoc | F = tT 7.43 [.292] -64 [.025} SQ PINS SOLDER TAIL PINS 5.60 [.220; PRESS FIT PINS Berg Electronics 1-800-237-2374 Me 9005411 0002695 259 HPC 17-11PCB Mounted Headers and Shrouds High Pin Count (HPC) 2.54 mm (0.100 in.) Centerlines 3- and 4-Row Vertical and Right-Angle Headers Self-Retaining and Slip-On Shrouds 0, 1, and 2 header Guide Pins Features Options Approvals and = =3-Row: 30 through 450 positions. Solder-tail or press-fit pins. Certifications = 4-Row: 40 through 600 positions. = Three mating pin lengths for CAL File no. E66906 Polyphenylene sulfide (PPS) housing for IR and vapor-phase soldering. Plated with gold or Bergs exclusive first-make--last-break applications. Selective loading of pins. Various tail lengths. G- File no. LR46923 GXT (palladium-nickel alloy with gold flash). =) Made with 0.64 mm (0.025 in.) drawn-wire pins. Mating Data Application Equipment = 3- and 4-row shrouds for all header Berg Electronics Products Page sizes. = HPC Right-Angle Berg Electronics Products Page All mounting brackets are Receptacles ................ 17-18 = HPC Header pre-assembled. Installation Kit............... 17-51 = Hardware for mounting, power and static discharge, guidance, and keying. Radiused pin tip for lower insertion force. Technical Data q Materials = Contact resistance ........ <20 mQ (mated system) after Housing...............000. Glass-filled PPS (UL-94 V-0) environmental conditions ai \ 9) (0) ga Black Mechanical Performance @ Pin......... Phosphor-bronze, 3/4 hard per ASTM B-159 Normal force................004 0.54 N (60 gf) typical; Electrical Performance 0.49 N (50 gf) min, 200 kpsi Hertz stress = Insulation resistance. .................. 21000 MQ after Environmental Properties environmental test conditions o RR 9 = Withstanding voltage ................ 21000 V ac rms, Temperature range... .-..s sees 65C to +125C 60 Hz at sea level Packaging Current rating . ae . Ant Allcontacts powered ........... 1.0 amp continuous ntistatic tubes per contact One contact powered........... 3.0 amp continuous per contact Customer Support Materials Description Order No. Description Order No. Customer Product Drawings............... By Part No. Product Samples................00000- Upon Request Product Specifications.................... BUS-12-090 ; Me 9005411 O002b4b 246 17-2, HPC Berg Electronics 1-800-237-2374