To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1
September 2014
LM78XX / LM78XXA
3-Terminal 1 A Positive Voltage Regulator
Features
Output Current up to 1 A
Output Voltages: 5, 6, 8, 9, 10, 12, 15, 18, 24 V
Thermal Overload Protection
Short-Circuit Protection
Output Transistor Safe Operating Area Protection
Ordering Information(1)
Note:
1. Above output voltage tolerance is available at 25°C.
Product Number Output Voltage
Tolerance Package Operating
Temperature Packing Method
LM7805CT
±4%
TO-220
(Single G auge)
-40°C to +125°C
Rail
LM7806CT
LM7808CT
LM7809CT
LM7810CT
LM7812CT
LM7815CT
LM7818CT
LM7824CT
LM7805ACT
±2% 0°C to +125°C
LM7809ACT
LM7810ACT
LM7812ACT
LM7815ACT
Description
The LM78XX series of three-terminal positive regulators
is available in the TO-220 package and with several fixed
output voltages, making them useful in a wide range of
applications. Each type employs internal current limiting,
thermal shut-down, and safe operating area protection. If
adequate heat sinking is provided, they can deliver over
1 A output current. Although designed primarily as fixed-
voltage regulators, these devices can be used with exter-
nal components for adjustable voltages and currents.
1
1. Input
2. GND
3. Output
GND
TO-220 (Single Gauge)
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 2
Block Diagram
Figure 1. Block Diagram
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the re co mmen ded operating conditions and s tres si ng the parts to these level s i s not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless ot herwise noted.
Symbol Parameter Value Unit
VIInput Voltage VO = 5 V to 18 V 35 V
VO = 24 V 40
RθJC Thermal Resistance, Junction-Case (TO-220) 5 °C/W
RθJA Thermal Resistance, Junction-Air (TO-220) 65 °C/W
TOPR Operati ng Tempe ratu re Rang e LM78xx -40 to +125 °C
LM78xxA 0 to +125
TSTG Storage Temperature Range - 65 to +150 °C
Starting
Circuit
Input
1
Reference
Voltage
Current
Generator
SOA
Protection
Thermal
Protection
Series Pass
Element
Error
Amplifier
Output
3
GND
2
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 3
Electrical Characteristics (LM7805)
Refer to the test circuit, -40°C < TJ < 125°C, IO = 500 mA, VI = 10 V, CI = 0.1 μF, unless otherwise specifi ed.
Notes:
2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects
must be taken into account separately. Pulse testing with low duty is used.
3. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 4.805.005.20 V
IO = 5 mA to 1 A, PO 15 W,
VI = 7 V to 20 V 4.75 5.00 5.25
Regline Line Regulation(2) TJ = +25°CVI = 7 V to 25 V 4.0 100.0 mV
VI = 8 V to 12 V 1.6 50.0
Regload Load Regulation(2) TJ = +25°CIO = 5 mA to 1.5 A 9.0 100.0 mV
IO = 250 mA to 750 mA 4.0 50.0
IQQuiescent Current TJ = +25°C58mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.03 0.50 mA
VI = 7 V to 25 V 0.30 1.30
ΔVO/ΔT Output Voltage Drift(3) IO = 5 mA -0.8 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C42μV
RR Ripple Rejection(3) f = 120 Hz, VI = 8 V to 18 V 62 73 dB
VDROP Dropout Voltage TJ = +25°C, IO = 1 A 2 V
ROOutput Resistance(3) f = 1 kHz 15 mΩ
ISC Short-Circ uit Current TJ = +25°C, VI = 35 V 230 mA
IPK Peak Current(3) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 4
Electrical Characteristics (LM7806)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 11 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
4. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
5. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 5.756.006.25 V
IO = 5 mA to 1 A, PO 15 W,
VI = 8.0 V to 21 V 5.70 6.00 6.30
Regline Line Regulation(4) TJ = +25°CVI = 8 V to 25 V 5.0 120.0 mV
VI = 9 V to 13 V 1.5 60.0
Regload Load Regulation(4) TJ = +25°C IO = 5 mA to 1.5 A 9.0 120.0 mV
IO = 250 mA to 750 mA 3.0 60.0
IQQuiescent Current TJ = +25°C58mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.5 mA
VI = 8 V to 25 V 1.3
ΔVO/ΔT Output Voltage Drift(5) IO = 5 mA -0.8 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C45μV
RR Ripple Rejection(5) f = 120 Hz, VI = 8 V to 18 V 62 73 dB
VDROP Dropout Voltage TJ = +25°C, IO = 1 A 2 V
ROOutput Resistance(5) f = 1 kHz 19 mΩ
ISC Short-Circ uit Current TJ = +25°C, VI = 35 V 250 mA
IPK Peak Current(5) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 5
Electrical Characteristics (LM7808)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 14 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
6. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
7. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 7.7 8.0 8.3 V
IO = 5 mA to 1 A, PO 15 W,
VI = 10.5 V to 23 V 7.6 8.0 8.4
Regline Line Regulation(6) TJ = +25°CVI = 10.5 V to 25 V 5 160 mV
VI = 11.5 V to 17 V 2 80
Regload Load Regulation(6) TJ = +25°C IO = 5 mA to 1.5 A 10 160 mV
IO = 250 mA to 750 mA 5 80
IQQuiescent Current TJ = +25°C58mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.05 0.50 mA
VI = 10.5 V to 25 V 0.5 1 .0
ΔVO/ΔT Output Voltage Drift(7) IO = 5 mA -0.8 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C52μV
RR Ripple Rejection(7) f = 120 Hz, VI = 11.5 V to 21.5 V 56 73 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(7) f = 1 kHz 17 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C230mA
IPK Peak Current(7) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 6
Electrical Characteristics (LM7809)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 15 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
9. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 8.659.009.35 V
IO = 5 mA to 1 A, PO 15 W,
VI = 11.5 V to 24 V 8.60 9.00 9.40
Regline Line Regulation(8) TJ = +25°CVI = 11.5 V to 25 V 6 180 mV
VI = 12 V to 17 V 2 90
Regload Load Regulation(8) TJ = +25°C IO = 5 mA to 1.5 A 12 180 mV
IO = 250 mA to 750 mA 4 90
IQQuiescent Current TJ = +25°C58mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.5 mA
VI = 11.5 V to 26 V 1.3
ΔVO/ΔT Output Voltage Drift(9) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C58μV
RR Ripple Rejection(9) f = 120 Hz, VI = 13 V to 23 V 56 71 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(9) f = 1 kHz 17 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(9) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 7
Electrical Characteristics (LM7810)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 16 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
10. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
11. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 9.6 10.0 10.4 V
IO = 5 mA to 1 A, PO 15 W,
VI = 12.5 V to 25 V 9.5 10.0 10.5
Regline Line Regulation(10) TJ = +25°CVI = 12.5 V to 25 V 10 200 mV
VI = 13 V to 25 V 3 100
Regload Load Regulation(10) TJ = +2 5°C IO = 5 mA to 1.5 A 12 200 mV
IO = 250 mA to 750 mA 4 400
IQQuiescent Current TJ = +25°C5.18.0mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.5 mA
VI = 12.5 V to 29 V 1.0
ΔVO/ΔT Output Voltage Drift(11) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C58μV
RR Ripple Rejection(11) f = 120 Hz, VI = 13 V to 23 V 56 71 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(11) f = 1 kHz 17 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(11) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 8
Electrical Characteristics (LM7812)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 19 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
12. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
13. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 11.5 12.0 12.5 V
IO = 5 mA to 1 A, PO 15 W,
VI = 14.5 V to 27 V 11.4 12.0 12.6
Regline Line Regulation(12) TJ = +25°CVI = 14.5 V to 30 V 10 240 mV
VI = 16 V to 22 V 3 120
Regload Load Regulation(12) TJ = +2 5°C IO = 5 mA to 1.5 A 11 240 mV
IO = 250 mA to 750 mA 5 120
IQQuiescent Current TJ = +25°C5.18.0mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.1 0. 5 mA
VI = 14.5 V to 30 V 0.5 1 .0
ΔVO/ΔT Output Voltage Drift(13) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C76μV
RR Ripple Rejection(13) f = 120 Hz, VI = 15 V to 25 V 55 71 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(13) f = 1 kHz 18 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C230mA
IPK Peak Current(13) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 9
Electrical Characteristics (LM7815)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 23 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
14. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
15. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 14.40 15.00 15.60 V
IO = 5 mA to 1 A, PO 15 W,
VI = 17.5 V to 30 V 14.25 15.00 15.75
Regline Line Regulation(14) TJ = +25°CVI = 17.5 V to 30 V 11 300 mV
VI = 20 V to 26 V 3 150
Regload Load Regulation(14) TJ = +2 5°C IO = 5 mA to 1.5 A 12 300 mV
IO = 250 mA to 750 mA 4 150
IQQuiescent Current TJ = +25°C5.28.0mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.5 mA
VI = 17.5 V to 30 V 1.0
ΔVO/ΔT Output Voltage Drift(15) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C90μV
RR Ripple Rejection(15) f = 120 Hz, VI = 18.5 V to 28.5 V 54 70 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(15) f = 1 kHz 19 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(15) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 10
Electrical Characteristics (LM7818)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 27 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
16. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
17. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 17.3 18.0 18.7 V
IO = 5 mA to 1 A, PO 15 W,
VI = 21 V to 33 V 17.1 18.0 18.9
Regline Line Regulation(16) TJ = +25°CVI = 21 V to 33 V 15 360 mV
VI = 24 V to 30 V 5 180
Regload Load Regulation(16) TJ = +2 5°C IO = 5 mA to 1.5 A 15 360 mV
IO = 250 mA to 750 mA 5 180
IQQuiescent Current TJ = +25°C5.28.0mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.5 mA
VI = 21 V to 33 V 1.0
ΔVO/ΔT Output Voltage Drift(17) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C110μV
RR Ripple Rejection(17) f = 120 Hz, VI = 22 V to 32 V 53 69 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(17) f = 1 kHz 22 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(17) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 11
Electrical Characteristics (LM7824)
Refer to the test circuit, -40°C < T J < 125°C, IO = 500 mA, V I = 33 V, CI = 0.3 3 μF, CO = 0.1 μF, unless otherwise spec-
ified.
Notes:
18. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
19. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 23.00 24.00 25.00 V
IO = 5 mA to 1 A, PO 15 W,
VI = 27 V to 38 V 22.80 24.00 25.25
Regline Line Regulation(18) TJ = +25°CVI = 27 V to 38 V 17 480 mV
VI = 30 V to 36 V 6 240
Regload Load Regulation(18) TJ = +2 5°C IO = 5 mA to 1.5 A 15 480 mV
IO = 250 mA to 750 mA 5 240
IQQuiescent Current TJ = +25°C5.28.0mA
ΔIQQuiescent Current
Change IO = 5 mA to 1 A 0.1 0. 5 mA
VI = 27 V to 38 V 0.5 1.0
ΔVO/ΔT Output Voltage Drift(19) IO = 5 mA -1.5 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C120μV
RR Ripple Rejection(19) f = 120 Hz, VI = 28 V to 38 V 50 67 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(19) f = 1 kHz 28 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C230mA
IPK Peak Current(19) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 12
Electrical Characteristics (LM7805A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 10 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Notes:
20. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
21. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 4.9 5.0 5.1 V
IO = 5 mA to 1 A, PO 15 W,
VI = 7.5 V to 20 V 4.8 5.0 5.2
Regline Line Regulation(20)
VI = 7.5 V to 25 V, IO = 500 mA 5.0 50.0
mV
VI = 8 V to 12 V 3.0 50.0
TJ = +25°CVI = 7.3 V to 20 V 5.0 50.0
VI = 8 V to 12 V 1.5 25.0
Regload Load Regulation(20) TJ = +2 5°C, IO = 5 mA to 1.5 A 9 100 mVIO = 5 mA to 1 A 9 100
IO = 250 mA to 750 mA 4 50
IQQuiescent Current TJ = +25°C56mA
ΔIQQuiescent Current
Change
IO = 5 mA to 1 A 0.5 mAVI = 8 V to 25 V, IO = 500 mA 0.8
VI = 7.5 V to 20 V, TJ = +25°C0.8
ΔVO/ΔT Output Voltage Drift(21) IO = 5 mA -0.8 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C42μV
RR Ripple Rejection(21) f = 120 Hz, VO = 500 mA,
VI =8 V to 18 V 68 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(21) f = 1 kHz 17 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(21) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 13
Electrical Characteristics (LM7809A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 15 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Notes:
22. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
23. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 8.829.009.16 V
IO = 5 mA to 1 A, PO 15 W,
VI = 11.2 V to 24 V 8.65 9.00 9.35
Regline Line Regulation(22)
VI = 11.7 V to 25 V, IO = 50 0 mA 6 90
mV
VI = 12.5 V to 19 V 4 45
TJ = +25°CVI = 11.5 V to 24 V 6 90
VI = 12.5 V to 19 V 2 45
Regload Load Regulation(22) TJ = +2 5°C, IO = 5 mA to 1.5 A 12 100 mVIO = 5 mA to 1 A 12 100
IO = 250 mA to 750 mA 5 50
IQQuiescent Current TJ = +25°C56mA
ΔIQQuiescent Current
Change
IO = 5 mA to 1 A 0.5 mAVI = 12 V to 25 V, IO = 500 mA 0.8
VI = 11.7 V to 25 V, TJ = +25°C0.8
ΔVO/ΔT Output Voltage Drift(23) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C58μV
RR Ripple Rejection(23) f = 120 Hz, VO = 500 mA,
VI =12 V to 22 V 62 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(23) f = 1 kHz 17 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(23) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 14
Electrical Characteristics (LM7810A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 16 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Notes:
24. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
25. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 9.8 10.0 10.2 V
IO = 5 mA to 1 A, PO 15 W,
VI = 12.8 V to 25 V 9.6 10.0 10.4
Regline Line Regulation(24)
VI = 12.8 V to 26 V, IO = 50 0 mA 8 100
mV
VI = 13 V to 20 V 4 50
TJ = +25°CVI = 12.5 V to 25 V 8 100
VI = 13 V to 20 V 3 50
Regload Load Regulation(24) TJ = +2 5°C, IO = 5 mA to 1.5 A 12 100 mVIO = 5 mA to 1 A 12 100
IO = 250 mA to 750 mA 5 50
IQQuiescent Current TJ = +25°C56mA
ΔIQQuiescent Current
Change
IO = 5 mA to 1 A 0.5 mAVI = 12.8 V to 25 V, IO = 500 mA 0.8
VI = 13 V to 26 V, TJ = +25°C0.5
ΔVO/ΔT Output Voltage Drift(25) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C58μV
RR Ripple Rejection(25) f = 120 Hz, VO = 500 mA,
VI =14 V to 24 V 62 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(25) f = 1 kHz 17 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(25) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 15
Electrical Characteristics (LM7812A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 19 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Notes:
26. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
27. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 11.75 12.00 12.25 V
IO = 5 mA to 1 A, PO 15 W,
VI = 14.8 V to 27 V 11.50 12.00 12.50
Regline Line Regulation(26)
VI = 14.8 V to 30 V, IO = 50 0 mA 10 120
mV
VI = 16 V to 22 V 4 120
TJ = +25°CVI = 14.5 V to 27 V 10 120
VI = 16 V to 22 V 3 60
Regload Load Regulation(26) TJ = +2 5°C, IO = 5 mA to 1.5 A 12 100 mVIO = 5 mA to 1 A 12 100
IO = 250 mA to 750 mA 5 50
IQQuiescent Current TJ = +25°C56mA
ΔIQQuiescent Current
Change
IO = 5 mA to 1 A 0.5 mAVI = 14 V to 27 V, IO = 500 mA 0.8
VI = 15 V to 30 V, TJ = +25°C0.8
ΔVO/ΔT Output Voltage Drift(27) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C76μV
RR Ripple Rejection(27) f = 120 Hz, VO = 500 mA,
VI =14 V to 24 V 60 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(27) f = 1 kHz 18 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(27) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 16
Electrical Characteristics (LM7815A)
Refer to the test circuit, 0°C < TJ < 125°C, IO = 1 A, VI = 23 V, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified.
Notes:
28. Load and line re gulati on are s pecifi ed at co nstan t junction temperature . Cha nges in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
29. These parameters, although guaranteed, are not 100% tested in production.
Symbol Parameter Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ = +25°C 14.75 15.00 15.30 V
IO = 5 mA to 1 A, PO 15 W,
VI = 17.7 V to 30 V 14.40 15.00 15.60
Regline Line Regulation(28)
VI = 17.4 V to 30 V, IO = 50 0 mA 10 150
mV
VI = 20 V to 26 V 5 150
TJ = +25°CVI = 17.5 V to 30 V 11 150
VI = 20 V to 26 V 3 75
Regload Load Regulation(28) TJ = +2 5°C, IO = 5 mA to 1.5 A 12 100 mVIO = 5 mA to 1 A 12 100
IO = 250 mA to 750 mA 5 50
IQQuiescent Current TJ = +25°C5.26.0mA
ΔIQQuiescent Current
Change
IO = 5 mA to 1 A 0.5 mAVI = 17.5 V to 30 V, IO = 500 mA 0.8
VI = 17.5 V to 30 V, TJ = +25°C0.8
ΔVO/ΔT Output Voltage Drift(29) IO = 5 mA -1 mV/°C
VNOutput Noise Voltage f = 10 Hz to 100 kHz, TA = +25°C90μV
RR Ripple Rejection(29) f = 120 Hz, VO = 500 mA,
VI =18.5 V to 28.5 V 58 dB
VDROP Dropout Voltage IO = 1 A, TJ = +25°C2V
ROOutput Resistance(29) f = 1 kHz 19 mΩ
ISC Short-Circ uit Current VI = 35 V, TJ = +25°C250mA
IPK Peak Current(29) TJ = +25°C2.2A
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 17
Typical Performance Characteristics
Figure 2. Quiescent Current Figure 3. Pea k Output Current
Figure 4. Output Voltage Figure 5. Quiescent Current
6
5.75
5.5
5.25
5
4.75
4.5
VI = 10V
VO = 5V
IO = 5mA
-25-50 0 25 50 75 100 125
QUIESCENT CURRENT (mA)
JUNCTION TEMPERATURE (°C)
0
3
2.5
2
1.5
1
.5
0
TJ = 25°C
ΔVO = 100mV
5 101520253035
OUTPUT CURRENT (A)
INPUT-OUTPUT DIFFERENTIAL (V)
1.02
1.01
1
0.99
0.98
VI – VO = 5V
IO = 5mA
-25-50 0 25 50 75 100 125
NORMALIZED OUTPUT VOLTAGE (V)
JUNCTION TEMPERATURE (°C)
7
6.5
6
5.5
5
4.5
4
TJ = 25°C
VO = 5V
IO = 10mA
1051520253035
QUIESCENT CURRENT (mA)
INPUT VOLTAGE (V)
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 18
Typical Applications
Figure 6. DC Parameters
Figure 7. Load Regulation
Figure 8. Ripple Rejection
0.1μF
CO
CI0.33μF
Output
Input
LM78XX
13
2
LM78XX
3
2
1
0.33μF
270pF
100Ω30μS
RL
2N6121
or EQ
Output
Input
VO
0V
VO
LM78XX
Output
Input
5.1Ω
0.33μF 2
31
RL
470μF
120Hz +
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 19
Typical Applications (Continued)
Figure 9. Fixed-Output Regulator
Figure 10. Constant Current Regulator
Notes:
29. To specify an out put volt age, substitute volta ge value for “XX”. A common ground is requ ired between the input and
the output voltage. The input volt age mu st remain typi cally 2.0 V above t he output volt age even durin g the low point
on the input ripple voltage.
30. CI is required if regulator is located an appreciable distance from power supply filter.
31. CO improves stability and transient response.
Figure 11. Circuit for Increasing Output Voltage
0.1μF
CO
CI0.33μF
Output
Input
LM78XX
13
2
0.1μF
CO
CI0.33μF
Output
Input
LM78XX
13
2VXX
R1
RL
IQ
IO
IO = R1 +IQ
VXX
0.1μF
CO
CI0.33μF
Output
Input
LM78XX
13
2VXX R1
R2
IQ
IRI 5 IQ
VO = VXX(1 + R2 / R1) + IQR2
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 20
Typical Applications (Continued)
Figure 12. Adjustable Output Regulator (7 V to 30 V)
Figure 13. High-Current Voltage Regulator
Figure 14. High Output Current with Short-Circuit Protection
LM741
-
+
2
3
6
4
2
3
1
0.33μF
CI
Input Output
0.1μF
CO
LM7805
10kΩ
IRI 5 IQ
VO = VXX(1 + R2 / R1) + IQR2
3
2
1
LM78XX
Output
Input
R1
3Ω
0.33μF
IREG
0.1μF
IO
IQ1
IO = IREG + BQ1 (IREG–VBEQ1/R1)
Q1 BD536
R1 = VBEQ1
IREG–IQ1 BQ1
/
LM78XX
Output
0.1μF
0.33μF
R1
3Ω
3
2
1
Q1
Input
Q2
Q1 = TIP42
Q2 = TIP42
RSC = I
SC
VBEQ2
RSC
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 21
Typical Applications (Continued)
Figure 15. Tracking Voltage Regulator
Figure 16. Sp lit Power Supply (±15 V - 1 A)
LM78XX
LM741
0.1μF
0.33μF
1
2
3
72
6
434.7kΩ
4.7kΩ
TIP42
COMMON
COMMON
VO
-VO
VI
-VIN
_
+
3
1
2
1
3
2
0.33μF 0.1μF
2.2μF
1μF +
+
1N4001
1N4001
+15V
-15V
+20V
-20V
LM7815
MC7915
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 22
Typical Applications (Continued)
Figure 17. Negative Output Voltage Circuit
Figure 18. Switching Regulator
LM78XX
Output
Input
+
1
2
0.1μF
3
LM78XX
1mH
3
1
2
2000μF
Output
Input D45H11
0.33μF
470Ω
4.7Ω
10μF
0.5Ω
Z1
+
+
LM78XX / LM78XXA — 3-Terminal 1 A Positive Voltage Regulator
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com
LM78XX / LM78XXA Rev . 1.3.1 23
Physical Dimensions
Figure 19. TO-220, MOLDED, 3-LEAD, JEDEC VARIATION AB (ACTIVE)
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower¥
Awinda
®
AX-CAP
®
*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED
®
Dual Cool™
EcoSPARK
®
EfficientMax¥
ESBC¥
Fairchild
®
Fairchild Semiconductor
®
FACT Quiet Series¥
FACT
®
FAST
®
FastvCore¥
FETBench¥
FPS¥
F-PFS¥
FRFET
®
Global Power Resource
SM
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid
®
MTi
®
MTx
®
MVN
®
mWSaver
®
OptoHiT¥
®
PowerTrench
®
PowerXS™
Programmable Active Droop¥
QFET
®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM
®
STEALTH¥
SuperFET
®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS
®
SyncFET¥
Sync-Lock™
®*
TinyBoost
®
TinyBuck
®
TinyCalc¥
TinyLogic
®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT
®
*
μSerDes¥
UHC
®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
Xsens™
௝❺
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. T
O OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE
AT HTTP://WWW.FAIRCHILDSEMI.COM.
FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain
life, and (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I71
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC