DA01S Series 1W DC/DC CONVERTER, DIP-Package, High Isolation FEATURES Efficiency up to 79% DIP Package with Industry Standard Pinout High Isolation Voltage 3000VDC Temperature Performance -40 to +75 > 2MHours MTBF Internal SMD platform Lead free, RoHs Compliant 12 Standard Models 3 Years Product Warranty The DA01S series are miniature, DIP Package, isolated 1W DC/DC converters with 3,000VDC isolation. It allows a wide operating temperature range of -40C to +75C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Model List Model Number Input Voltage (Range) Output Voltage VDC DA01S0505A DA01S0509A 5 DA01S0512A (4.5 ~ 5.5) DA01S0515A DA01S1205A DA01S1209A 12 DA01S1212A (10.8 ~ 13.2) DA01S1215A DA01S2405A DA01S2409A 24 DA01S2412A (21.6 ~ 26.4) DA01S2415A VDC 5 9 12 15 5 9 12 15 5 9 12 15 Output Current Max. Min. mA 200 110 84 67 200 110 84 67 200 110 84 67 mA 4 2 1.5 1 4 2 1.5 1 4 2 1.5 1 Input Current Load Regulation Max. apacitive Load @Max. Load @Max. Load @No Load mA(typ.) 290 260 262 257 117 107 106 106 60 54 53 53 Efficiency (typ.) mA(typ.) % (max.) 11 8 7 6 9 5 5 4 8 5 4 4 30 13 10 uF % 69 76 77 78 71 77 79 79 70 76 79 79 33 33 33 Input Characteristics Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 7 12V Input Models -0.7 --- 15 24V Input Models -0.7 --- 28 --- --- 0.3 Reverse Polarity Input Current Input Filter Internal Power Dissipation DS_DA01S_03152012 All Models Unit VDC A Internal Capacitor --- --- 450 mW E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P1 Output Characteristics Parameter Conditions Min. Typ. Max. Unit --- 1.0 3.0 % --- 1.2 1.5 % mV P-P Output Voltage Accuracy Line Regulation For Vin Change of 1% Load Regulation Io=20% to 100% +-11% max Ripple & Noise (20MHz) --- 100 150 --- --- 200 mV P-P Ripple & Noise (20MHz) --- --- 15 mV rms Temperature Coefficient --- 0.01 0.02 %/ Ripple & Noise (20MHz) Over Line, Load & Temp. Short Circuit Protection 0.5 Second Max. General Characteristics Parameter I/O Isolation Voltage (rated) Conditions Min. Typ. Max. Unit 60 Seconds 3000 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- G I/O Isolation Capacitance 100KHz, 1V --- 60 100 pF 50 90 110 KHz 2,000,000 --- --- Hours Switching Frequency MTBF (calculated) MIL-HDBK-217F@25, Ground Benign Recommended Input Fuse 5V Input Models 500mA Slow-Blow Type 12V Input Models 200mA Slow-Blow Type 24V Input Models 100mA Slow-Blow Type Environmental Characteristics Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. Max. -40 +85 --+90 -50 +125 --95 Free-Air convection --260 Unit % rel. H Output Power (%) Output Power (%) Power Derating Curve (5V Output Only) (All Other Output) Notes 1 2 3 4 5 Specifications typical at Ta=+25, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P2 Package Specifications Pin Connections 2.54 [0.10] 0.50 [0.02] 7.62 [0.30] Bottom View 7 5 -Vin 4 +Vin 5 +Vout 7 -Vout L=8.0 [0.31] for 24V Input Models 10.2 [0.40] 4 Function 1 L=7.0 [0.28] for 5V & 12V Input Models 2.6 [0.10] 7.62 [0.30] 1 Pin L 3.1 [0.12] 0.4 [0.02] Mechanical Dimensions 12.7 [0.50] 1.29 [0.05] All dimensions in mm 5.08 [0.20] Tolerance: X.X0.25 (inches) (X.XX0.01) X.XX0.13 ( X.XXX0.005) Pin diameter 0.5 0.05 (0.020.002) Physical Characteristics Case Size (5V&12V Input) : 12.7x7.0x10.2mm (0.50x0.28x0.40 Inches) Case Size(24V Input) : 12.7x8.0x10.2mm (0.50x0.31x0.40 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight(5V&12V Input) : 1.3g Weight(24V Input) : 1.7g DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P3 Part Numbering System D A 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Delta Electronics: DA01S2409A DA01S1209A DA01S0515A DA01S0512A DA01S1215A DA01S1212A DA01S2412A DA01S1205A DA01S0505A DA01S2405A DA01S2415A DA01S0509A