SFP+ PLUGGABLE I/O INTERCONNECT TE Connectivity's (TE) family of SFP+ interconnects is designed to transfer data at speeds of up to 16 Gb/s. The portfolio features 20-position SMT connectors as well as cages in multiple configurations, and with elastomeric gasket or enhanced EMI springs to address EMI containment at higher data rates. The SFP+ interconnect family also includes thermal- and EMI-enhanced stacked configurations to further improve performance. Complementary SFP+ direct-attach copper cable assemblies are also offered by TE as high-speed, cost-effective alternatives to fiber optic cables. The assemblies enable hardware OEMs and data center operators to achieve high port density and configurability at low costs and with reduced power requirements. FEATURES AND BENEFITS Interconnect Direct-Attach Copper Cable Assemblies * Supports applications up to 16 Gb/s * Comply to SFF-8431 specifications * Offers cages in single-port, ganaged and stacked configurations. Belly-to-belly mounting cages also offered * Support up to 10 Gb/s serial data rates * Uses enhanced 20-position connector that is backward-compatible with SFP connectors * Consume low power * Features elastomeric gaskets and springs for EMI containment * Feature pull-to-release retractable pin latch * Serve as a low-cost alternative to fiber optic cables * Offer enhanced EMI suppression * Offers heat sink and light pipe options DATA AND DEVICES /// SFP+ PLUGGABLE I/O INTERCONNECT SFP+ Pluggable I/O Interconnect Product Applications Applications by Protocol * Storage, servers, routers, switches and hubs * Network Interface Cards (NICs) * Other telecommunications equipment * 10 Gigabit Ethernet (IEEE802.3ae) * Fibre Channel: 2G, 4G, 8G and 16G * Fibre Channel over Ethernet (FCoE) SFP+ Thermal and EMI Enhancements Gasket retention plate Conductive elastomeric gasket Thermal Enhancements SFP+ stacked cages have been modified to enhance thermal performance. These changes include revised side walls of the cage for airflow through the middle of the cage to promote cooling of lower ports Additionally, two thermal vent holes have been added to each port to further enhance thermal performance. Two thermal vent holes Side walls modified to promote more air flow Latch plate EMI Enhancements SFP+ stacked cages with EMI enhancements feature a gasket retention plate with multiple attachment points that improve the electrical connection to the cage. A new right-angle design of the gasket retention plate also improves the strength of the product. A pocket spring has been added to the latch plate area to further reduce EMI emission. This component is internal to the cage assembly. The additional component still allows airflow through the front of the cage assembly. Conducted, Total Radiated Power (dBm) SFP+ 2x4 EMI-Enhanced Cage vs. SFP+ 2x4 Standard Cage GHz Configuration Part Number Cage Design Configuration Part Number Cage Design 2007198-1 11-Pin Press-Fit (PF) 2x1 2007538-X Elastomeric Gasket Thermally-Enhanced 2110304-1 Standard Solder Tail 2x1 2170409-X 2007194-1 PCI Solder Tail 2x2 2007637-X EMI Spring Version 2057086-2 Enhanced Footprint 2x4 2007399-X Elastomeric Gasket 1x2 2007263-1 PF, Thermal Vent Holes 2x4 2274010-X Thermally-Enhanced 1x4 2169260-1 Heat Sink Slots 2x6 2007562-X EMI Spring Version Single Port 1x5 2284170-1 Heat Sink Slots 2x6 2180640-X Thermally-Enhanced 1x6 2007251-1 PF, Thermal Vent Holes 2x8 2149490-X EMI Spring Version To see more part numbers, visit www.te.com/products/sfpplus or refer to the Pluggable Input/Output Solutions Catalog 1773408-1 DATA AND DEVICES /// SFP+ PLUGGABLE I/O INTERCONNECT PAGE 2 SFP+ Pluggable I/O Interconnect 20 Pin SMT Connector Dust Cap PN Description PN 2110759-1 Rated to 16G 1367147-X Description Dust Cap 1888247-1 30 in Au 1888901-1 EMI Plug 1888247-2 15 in Au 1761394-1 Dust Cap (narrow for multiport cages) Cable Assembly Features and Benefits * * * * * * Truly broadband - operates from 1 to 10 Gb/s 100 Ohm differential impedance 3.3 V input source voltages Pull tab allows compact belly-to-belly application 360 degree cable braid crimp and enhanced EMI skirt Uses MADISON CABLE brand TurboTwin parallel pair cable Direct Attach Copper Cable Assemblies PN 2127934 2127933 2127932 2127931 Description Standard Passive Other Passive AWG Cable Length (meters) 0.5 1 2 3 4 5 6 7 24 -1 -2 -3 -4 -5 -6 -7 -8 26 -1 -2 -3 -4 -5 -6 -7 28 -1 -2 -3 -4 -5 -6 30 -1 -2 -3 -4 8 9 10 -10 -11 24 2032757 Active 28 30 2053453 SFP+ to 26 QSFP+ 28 Hybrid 30 -1 -2 -3 -4 -5 -6 -7 -8 11 12 13 14 15 -12 -13 -14 -15 -16 -9 -6 -5 -1 -2 -3 -4 Frequently Asked Questions What is belly-to-belly mounting? What are the PCB termination options? * Belly-to-belly mounting allows a customer to install connectors and cages on both sides of a PCB. This design reduces board space and is an alternative solution to stacked connectors. * Cages are offered in press-fit and solder PCB termination styles. If I am currently using SFP cabling, can I use SFP+ host board configurations? * Yes. SFP+ configurations support higher rates. You can design SFP+ products in the host board for future upgrades. What data rate does SFP support? * SFP supports up to 16Gb/s. DATA AND DEVICES /// SFP+ PLUGGABLE I/O INTERCONNECT Is TE's footprint compatible with other suppliers? * It depends. The single port cages are designed to industry standards. The ganged versions are not compatible with all other sources. Are heat sinks available? * Yes. Riding heat sink technology is available for thermal management. Is application tooling required? * Single port assemblies do not require application tooling, yet ganged assemblies do require application tooling. PAGE 3 For More Information te.com/products/sfpplus TE Technical Support Center USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree te.com (c) 2015 TE Connectivity Ltd. family of companies. All Rights Reserved. 4-1773455-3 DND PDF 07/2015 MADISON CABLE, TurboTwin, TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other logos, product and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. DATA AND DEVICES /// SFP+ PLUGGABLE I/O INTERCONNECT