LITE-ON SEMICONDUCTOR Sensitive Gate Sillicon Controlled Rectifiers Reverse Blocking Thyristors S4M02-600F SCRs 4 AMPERES RMS 600 VOLTS TO-126 FEATURES Glass-Passivated Surface for Reliability and Uniformity Power Rated at Economical Prices Practical Level Triggering and Holding Characteristics Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability PIN ASSIGNMENT 1 Cathode 2 Anode 3 Gate MAXIMUM RATINGS (Tj= 25 unless otherwise noticed) Rating Symbol Value Unit VDRM, VRRM 600 Volts IT(RMS) 4.0 Amp ITSM 25 Amps It 2.6 As PGM 1 Watt PG(AV) 0.1 Watt TJ -40 to +110 Tstg -40 to +150 Peak Repetitive Off- State Voltage (TJ= -40 to 110, Sine Wave, 50 to 60 Hz; Gate Open) On-State RMS Current (TC = 80) 180 Conduction Angles Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave, 60 Hz, TJ = 25) 2 Circuit Fusing Consideration (t = 8.3 ms) Forward Peak Gate Power Forward Average Gate Power Operating Junction Temperature Range @ Rate VDRM and VRRM Storage Temperature Range Notice: (1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded 2 Rev.1, Oct.-2010, KTXD06 RATING AND CHARACTERISTIC CURVES S4M02-600F THERMAL CHARACTERISTICS Characteristic Thermal Resistance - Junction to Case - Junction to Ambient Maximum Lead Temperature for Soldering Purposes 1/16" from Case for 10 Seconds Symbol Value Unit RthJC RthJA 7.0 75 /W TL 260 ELECTRICAL CHARACTERISTICS (TJ=25unless otherwise noted) Characteristics Symbol Min Typ Max Unit IDRM IRRM ------- ------- 10 200 uA VTM ---- ---- 2.0 Volts Gate Trigger Current (VAK = 12 V ; RL = 100 Ohms) (1) IGT ---- ---- 200 uA Holding Current (VAK = 12 V, RL = 100 Ohms ) IH ---- ---- 5.0 mA VGT ---- ---- 1.0 Volts IL ---- ---- 10 mA dv/dt ---- 10 ---- V/us OFF CHARACTERISTICS Peak Reptitive Forward or Reverse Blocking Current (VAK=Rated VDRM and VRRM; RGK =1K Ohms) TJ = 25 TJ =110 ON CHARACTERISTICS Peak Forward On-State Voltage @TJ=25 (ITM= 8.0A Peak, Pulse Width 1.0 ms, Duty Cycle 1%) Gate Trigger Voltage (VAK = 12 V ; RL =100 Ohms) (1) Latching Current (VAK = 12 V, RL = 100 Ohms ) DYNAMIC CHARACTERISTICS Critical Rate of Rise of Off-State Voltage (VAK =0.67% Rated VDRM,Exponential Waveform, TJ=110 ,RGK=1Kohm) (1) RGK current is not included in measurement RATING AND CHARACTERISTIC CURVES S4M02-600F IT ,INSTANTANEOUS ON-STATE CURRENT (AMP) 100 10 TJ = 110 TJ = 25 1 0.1 0 0.5 1 1.5 2 2.5 3 VT ,INSTANTANEOUS ON-STATE VOLTAGE(VOLT) Figure 1. On-State Characteristics 3.5 1.4 1.5 1.2 VGT(Tj) / VGT(25) 2 1 0.5 -20 0 20 40 60 80 -20 0 20 40 60 80 TJ, JUNCTION TEMPERATURE() TJ, JUNCTION TEMPERATURE() Figure 2. Typical IGT versus TJ Figure 3. Typical VGT versus TJ 1.6 1.6 1.4 1.4 1.2 1 0.8 100 1.2 1 0.8 0.6 0.6 0.4 -40 0.4 -40 IT(RMS) ,RMS ON-STATE CURRENT (AMP) 0.8 0.6 -40 100 IL (Tj) / IL (25) IH (Tj) / IH (25) 0 -40 1 -20 0 20 40 60 80 100 -20 0 20 40 60 80 TJ, JUNCTION TEMPERATURE() TJ, JUNCTION TEMPERATURE() Figure 4. Typical IH versus TJ Figure 5. Typical IL versus TJ 100 5 5 4 3 2 1 0 0 25 50 75 100 TC, CASE TEMPERATURE() Figure 6. On-State Current Derating Curve 125 IT(AV), AVERAGE ON -STATE CURRENT (AMP) IGT(Tj) / IGT(25) RATING AND CHARACTERISTIC CURVES S4M02-600F 4 3 TJ = 25 2 TJ = 110 1 0 0 1 2 3 P(AV) ,AVERAGE POWER DISSIPATION (WATTS) Figure 7. Power Dissipation versus IT 4 RATING AND CHARACTERISTIC CURVES S4M02-600F MARKING DIAGRAMS LT YXWW S4M02 600F Y : Year X : Subcon WW : Work Week ORDERING INFORMATION Ordering type Marking Package Base qty Delivery mode S4M02-600F S4M02600F TO-126 50 Tube S 4M 02-600F (4A S CR ) Product F am ily S SC R Current 08 0.8A 4 4A 12=12A Sensitivity Grade MmA U A Sensitivity 02 0.2 2 2 20 20 S 4 M 02 600 Voltage 400 400V 600 600V 800 800V F Package A TO -92 B TO -220AB D SOT-223 F TO -126 Specifications mentioned in this publication are subject to change without notice. Legal Disclaimer Notice S4M02-600F Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.