HMC893LP5E v01.0112 Typical Applications Features The HMC892LP5E is ideal for: Fast Tuning Response; 200 ns * Test & Measurement Equipment Excellent Wideband Rejection; >30 dB * Military RADAR & EW/ECM Single Chip Replacement for Mechanically Tuned Designs * Industrial & Medical Equipment 32 Lead 5x5 mm SMT Package TE * SATCOM & Space General Description Functional Diagram LE The HMC893LP5E is a MMIC band pass filter which features a user selectable passband frequency. The 3 dB filter bandwidth is approximately 6.5%. The 20 dB filter bandwidth is approximately 18%. The center frequency can be varied between 4.8 and 9.5 GHz by applying an analog tune voltage between 0 and 14V. This tunable filter can be used as a much smaller alternative to physically large switched filter banks and cavity tuned filters. The HMC893LP5E has excellent microphonics due to the monolithic design, and provides a dynamically adjustable solution in advanced communications applications. SO Filters - Tunable - SMT FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Electrical Specifications, TA = +25C, Vfctl = Vbwctl Unless Otherwise Stated B Parameter Fcenter Tuning Range Min. Typ. 4.8 3 dB Bandwidth Low Side Rejection Frequency (Rejection >20 dB) O High Side Rejection Frequency (Rejection >20 dB) Re-entry Frequency (Rejection <30 dB) Max. Units 9.5 GHz 6.5 % 0.9*Fcenter GHz 1.1*Fcenter GHz 2.7*Fcenter GHz 3 dB Bandwidth Control (Vbwctl) 3 % Insertion Loss 10 dB Return Loss (2 dB Bandwidth) 7 Maximum Input Power for Linear Operation Frequency Control Voltage (Vfctl) 0 Source/Sink Current (Ifctl) Bandwidth Control Voltage (Vbwctl) dB 10 0 Source/Sink Current (Ibwctl) dBm 14 V 1 mA 14 V 1 mA Residual Phase Noise [1] (1 MHz Offset) -163 dBc/Hz Fcenter Drift Rate -0.75 MHz/C Tuning Characteristics [2] tFULLBAND (0% Vfctl to 90% RF) 200 ns [1] Optimum residual phase noise performance requires the use of a low noise driver circuit. [2] Tuning speed is dependent on driver circuit. Data measured with a high speed op-amp driver and includes driver slew rate delay. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Broadband Insertion Loss vs. Control Voltages, Vfctl = Vbwctl Broadband Return Loss vs. Control Voltages, Vfctl = Vbwctl 0 -5 0V 7V 14V -30 -40 -50 S11 S22 -15 0V -20 7V 14V -25 -60 -70 -30 0 5 10 15 20 25 30 0 FREQUENCY (GHz) 5 10 20 LE -4 25 30 Return Loss vs. Control Voltages, Vfctl = Vbwctl 0 -6 -5 -8 -12 -14 -16 -20 4 5 SO -10 RETURN LOSS (dB) 0V 7V 14V -18 6 7 8 9 10 -10 0V 7V S11 S22 -20 -25 -30 11 B Insertion Loss vs. Temperature, Vfctl = Vbwctl = 7V 4 5 6 8 9 10 11 O 0 -6 RETURN LOSS (dB) -5 +25C +85C -40C -10 7 FREQUENCY (GHz) Return Loss vs. Temperature, Vfctl = Vbwctl = 7V -4 -8 14V -15 FREQUENCY (GHz) INSERTION LOSS (dB) 15 FREQUENCY (GHz) Insertion Loss vs. Control Voltages, Vfctl = Vbwctl INSERTION LOSS (dB) -10 TE -20 RETURN LOSS (dB) INSERTION LOSS (dB) -10 Filters - Tunable - SMT 0 -12 -14 -16 S11 -10 S22 -15 -20 +25C +85C -40C -25 -18 -20 -30 4 5 6 7 8 FREQUENCY (GHz) 9 10 11 4 5 6 7 8 9 10 11 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Broadband Return Loss vs. Vbwctl, Vfctl = 7V Broadband Insertion Loss vs. Vbwctl, Vfctl = 7V 0 Vbwctl=4V Vbwctl=7V Vbwctl=10V -5 -30 -40 -50 -60 Vbwctl=4V Vbwctl=7V -10 Vbwctl=10V -15 -20 TE -20 RETURN LOSS (dB) INSERTION LOSS (dB) -10 S11 S22 -25 -30 -70 -80 -35 0 5 10 15 20 25 30 0 FREQUENCY (GHz) 5 10 25 30 Return Loss vs. Vbwctl, Vfctl = 7V 0 -6 -5 Vbwctl=4V Vbwctl=7V Vbwctl=10V Vbwctl=4V RETURN LOSS (dB) -8 -12 -14 -16 4 5 SO -10 -20 6 7 8 9 10 -10 Vbwctl=7V -15 Vbwctl=10V -20 -25 S11 S22 -30 -35 11 4 5 6 B FREQUENCY (GHz) Center Frequency vs. Temperature, Vfctl = Vbwctl 9 10 11 10 12 14 FREQUENCY (GHz) O 0 INSERTION LOSS (dB) 9 8 7 +25C +85C -40C 5 8 -2 10 6 7 Insertion Loss vs. Temperature, Vfctl = Vbwctl 11 CENTER FREQUENCY (GHz) 20 LE -4 -18 -4 -6 -8 -10 -12 -14 -16 +25C +85C -40C -18 4 -20 0 2 4 6 Vfctl (V) 3 15 FREQUENCY (GHz) Insertion Loss vs. Vbwctl, Vfctl = 7V INSERTION LOSS (dB) Filters - Tunable - SMT 0 8 10 12 14 0 2 4 6 8 Vfctl (V) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Maximum Return Loss in a 2 dB Bandwidth vs. Temperature, Vfctl = Vbwctl 3 dB Bandwidth vs. Temperature, Vfctl = Vbwctl 9 +25C +85C -40C 6 -4 -6 TE 7 5 -8 -10 4 -12 0 2 4 6 8 10 12 14 0 2 4 6 10 12 14 0.95 12 14 LE Low Side Rejection Ratio vs. Temperature, Vfctl = Vbwctl [1] High Side Rejection Ratio vs. Temperature, Vfctl = Vbwctl [1] 1.15 0.89 SO 0.91 F20dB To Fcenter RATIO 0.93 +25C +85C -40C 0.87 0.85 0 2 4 6 8 10 12 1.13 1.11 1.09 +25C +85C -40C 1.07 1.05 14 0 2 4 6 B Vfctl (V) Tuning Sensitivity vs. Temperature, Vfctl = Vbwctl O 2 GROUP DELAY (ns) 0V 500 400 300 +25C +85C -40C 100 0 0 2 4 6 Vfctl (V) 8 10 10 Vfctl (V) 600 200 8 Group Delay 700 SENSITIVITY (MHz/V) 8 Vfctl (V) Vfctl (V) F20dB TO Fcenter RATIO +25C +85C -40C -2 RETURN LOSS (dB) BANDWIDTH (%) 8 Filters - Tunable - SMT 0 12 14 14V 7V 1.5 1 0.5 0 3.5 4.5 5.5 6.5 7.5 8.5 FREQUENCY (GHz) 9.5 10.5 11.5 [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to center Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Group Delay vs. Fcenter vs. Temperature 3 dB Bandwidth vs. Bandwidth Control 12 + 25C + 85C - 40C 1.8 10 1.7 1.6 1.5 8 6 TE BANDWIDTH (%) GROUP DELAY (nS) 1.9 1.4 4 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v 2 1.3 1.2 0 0 2 4 6 8 10 12 14 0 Vfctl (V) 2 4 8 10 12 14 LE Low Side Rejection Ratio vs. Bandwidth Control [1] 1 -5 -15 SO -10 F20dB TO Fcenter RATIO 0 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v -20 -25 0 2 4 6 8 10 12 0.95 0.9 0.85 Vbwctl=Vfctl Vbwctl=Vfctl +3v Vbwctl=Vfctl -3v 0.8 14 0 2 4 B Vfctl (V) High Side Rejection Ratio vs. Bandwidth Control [1] O 8 10 12 14 Vfctl (V) 0 Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v Vbwctl=Vfctl Vbwctl=Vfctl+3v Vbwctl=Vfctl-3v -2 RETURN LOSS (dB) 1.2 6 Maximum Return Loss in a 2 dB Bandwidth vs. Bandwidth Control 1.25 F20dB TO Fcenter RATIO 6 Vfctl (V) Insertion Loss vs. Bandwidth Control INSERTION LOSS (dB) Filters - Tunable - SMT 2 1.15 1.1 1.05 -4 -6 -8 1 -10 0 2 4 6 8 10 12 14 0 2 4 Vfctl (V) 6 8 10 12 14 Vfctl (V) [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to center 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Input IP3 vs. Power Input Vfctl = Vbwctl Residual Phase Noise Vfctl = Vbwctl 35 25 20 Pin = 0 dBm Pin = 5 dBm Pin = 10 dBm Pin = 15 dBm Pin = 20 dBm 15 10 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 -150 -160 1.0e+3 1.0e+4 1.0e+5 1.0e+6 1.0e+7 OFFSET FREQUENCY (Hz) LE -0.5 to +15V Bandwidth Control Voltage (Vbwctl) -0.5 to +15V RF Power Input 26 dBm Storage Temperature -65 to +150 C Reliability Information SO Frequency Control Voltage (Vfctl) ESD Rating (HBM) -140 -170 1.0e+2 10.1 FREQUENCY (GHz) Absolute Maximum Ratings 0V 7V 13V -130 Junction Temperature to Maintain 1 Million Hour MTTF 150 C Nominal Junction Temperature (T= 85 C and Pin = 10 dBm) 90 C Operating Temperature -40 to +85 C Filters - Tunable - SMT IP3 (dBm) 30 TE RESIDUAL PHASE NOISE (dBc/Hz) -120 Class 1B O B ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz LE TE Filters - Tunable - SMT Outline Drawing SO NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. Pin BURR LENGTH SHALL BE 0.15mm MAXIMUM. Pin BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC893LP5E Package Body Material Lead Finish RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H893 XXXX O B [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Pin Descriptions 1 - 4, 7 - 11, 13 15 - 18, 21 - 32 N/C 5, 20 GND These pins and exposed paddle must be connected to RF/DC ground. 6 RFIN This pin is DC coupled and matched to 50 Ohms. External voltage must not be applied to this pin. 12 Vfctl 14 Vbwctl 19 Interface Schematic LE Center frequency control voltage. Bandwidth control voltage. Filters - Tunable - SMT Description The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. TE Function SO Pin Number RFOUT This pin is DC coupled and matched to 50 Ohms. External voltage must not be applied to this pin. O B Application Circuit Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8 HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz B SO LE TE Filters - Tunable - SMT Evaluation PCB List of Materials for Evaluation PCB 128531 [1] Description O Item J1, J2 SMA - SRI J3, J4 SMA - Johnson C1, C2 100 pF Capacitor, 0402 Pkg. U1 HMC893LP5E Filter - Tunable PCB [2] 127338 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 9 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohms impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC893LP5E v01.0112 FILTER - TUNABLE, BAND PASS SMT 4.8 - 9.5 GHz Filters - Tunable - SMT O B SO LE TE Notes: Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC893LP5E 128531-HMC893LP5E HMC893LP5ETR