Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Hybrid Couplers
3 dB, 90°
Features
• Welded Tab Mount
• 2-Way Power Split
• Reliable Performance
• Handles 150 Watts
Applications
• Microstrip Circuits
• Divider/Combiners
• Switch Networks
• Balanced Detectors
• Antenna Feeds
Outline Drawing
Electrical Specifications
Caseless Components
4.1.38
Model 1B0890-3
Frequency Isolation Insert. Loss VSWR
GHz dB Min/Typ dB Max Max : 1
0.85 - 1.45 20/22 0.30 1.25/1.15
Amp. Bal. Phase Bal. Power
dB Max Degrees Max Ave. CW Watts
±0.50 ±2.0 150
Notes: Electrical specifications apply only with properly designed test fixtures. Testing is done at ambient temper-
ature only. Sample testing is performed to MIL-STD-105, Level 2, AQL 1.0. Test includes coupling, amplitude
balance, insertion loss and isolation. If your application requires additional testing, consult Anaren Power rating
applies when solder tab/coupler interface has been conformally coated. Impedance: 50 ohms. Meets MIL-E-5400
Class 3 requirements. Additional screening available for military and space applications.
Electrical and Mechanical Specifications subject to change without notice.
NOTES:
1. DIMENSIONS ARE IN INCHES OVER
(MILLIMETERS)
2. MARKING SHALL BE IN ACCORDANCE WILL
MIL-STD-130
3. FINISH: CHEMICAL CONVERSATION
COAT (CLEAR) PER MIL-C-5541, CLASS 1A
4. SOLDER TAB:
4.1 MATERIAL:FLAT WIRE, COPPER-061,
PER ASTM-B-272
4.2 FINISH: GOLD PLATE PER
MIL-G-45204, TYPE 3, GRADE A,
CLASS 00. OVER NICKEL SULFAMATE
FLASH PER QQ-N-290, CLASS I.
