SMD High Power Precision Resistors Type RP73 Series Key Features n High precision tolerances down to 0.05% n Low TCR - down to 5ppm/C n Stable high frequency performance n Operating temperature -55C to +155C n Increased power rating up to 1.0W n Up to 200V DC operating voltage n Range of packaging options n Terminal finish electroplated 100% matte Sn Applications n Communications n Instrumentation n Industrial Controls n Medical The RP73 resistor series is a stable thin film chip resistor range offering increased power dissipation, higher temperature capabilities and increased working voltages compared to the standard RN73 series. The resistor is produced by sputtering a metal film onto high grade alumina and protecting with three complete printed layers. Values are normally offered in E96 and E24 series. The RP73 resistor has accurate and uniform physical dimensions to reduce placement problems. Characteristics - Electrical - RP73 Series - Standard Rated Power @ 70C: 0402 0603 0.063W 0.1W Resistance Range (Ohms) Min: 49R9 49R9 49R9 49R9 49R9 49R9 10R 49R9 49R9 10R 24R9 Max: 5K0 15K 100K 5K0 15K Tolerance (%): Code Letter: 70K 255K 5K0 15K 255K 15K 4R7 24R9 4R7 4R7 24R9 4R7 4R7 332K 15K 332K 1M0 15K 332K 1M0 0.05 0.1 0.5 / 1 0.05 0.1 0.5 / 1 A B D/F A B D/F Selection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/C): 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 5 10 15 2550 5 10 15 25 50 5 1015 25 50 Code Letter: A C D F G A C D F G A C D F G A C D F G A C D F G A CD F G Limiting Element Voltage: 25V 75V Max. Overload Voltage: 50V 150V Operating Temp. Range: -55 to +155C -55 to +155C 55/125/55 55/125/55 1000M 1000M 0.5% 0.5% Climatic Category (C): Insulation Resistance Dry Min: Stability: Rated Power @ 70C: Resistance Range (Ohms) Min: 24R9 4R7 Max: 30K Tolerance (%): Code letter: 511K 0805 1206 0.125W 0.25W 24R9 4R7 4R7 24R9 4R7 4R7 1R0 24R9 4R7 30K 511K 1M0 30K 511K 1M0 1M0 50K 1M0 0.05 0.1 0.5 / 1 0.05 / 0.1 / 0.5 / 1 A B D/F A/B/D/F Selection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/C): 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter: A C D F G A C A C D F G A C D F G Limiting Element Voltage: D F G 150V 200V Max. Overload Voltage: 300V 400V Operating Temp. Range: -55 to +155C -55 to +155C 55/125/55 55/125/55 1000M 1000M 0.5% 0.5% Climatic Category (C): Insulation Resistance Dry Min: Stability: 1773272 CIS WR 04/2012 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help SMD High Power Precision Resistors Type RP73 Series Rated Power @ 70C: Resistance Range (Ohms) Min: Max: 1210 2010 0.3W 0.3W 2512 1W 24R9 4R7 24R9 4R7 4R7 1R0 50K 1M0 50K 1M0 100R 100R 0.5 / 1 Tolerance (%): 0.05 / 0.1 / 0.5 / 1 0.05 / 0.1 / 0.5 / 1 0.1 A/B/D/F A/B/D/F B E24 & E96 E24 & E96 Code Letter: Selection Series: D/F E24 & E96 Temp. Coefficient (ppm/C): 5 10 15 25 50 5 10 15 25 50 25 50 25 50 Code Letter: A C D F G A C D F G F G F G Limiting Element Voltage: 200V 200V 200V Max. Overload Voltage: 400V 400V Operating Temp. Range: -55 to +155C -55 to +155C -55 to +155C 55/125/55 55/125/55 55/125/55 1000M 1000M 1000M 0.5% 0.5% 0.5% Climatic Category (C): Insulation Resistance Dry Min: Stability: 400V Characteristics - Electrical - RP73P Series - High Power Rated Power @ 70C: 0603 0805 0.166W 0.25W Resistance Range (Ohms) Min: 10R 10R Max: 332K 500K Tolerance (%): Code Letter: 0.1 0.5 1 0.1 0.5 1 B D F B D F Selection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/C): 25 50 25 50 25 50 25 50 25 50 25 50 Code Letter: F G F G F G F G F G F G Limiting Element Voltage: 100V 150V Max. Overload Voltage: 150V 300V Operating Temp. Range: -55 to +155C -55 to +155C 55/125/55 55/125/55 1000M 1000M 0.5% 0.5% Climatic Category (C): Insulation Resistance Dry Min: Stability: Characteristics - Environmental Requirement Tol. 0.05% Tol. > 0.05% Item Temperature Coefficient of Resistance (TCR): Test Method As per TCRs specified in value range table on page 1 Short Time Overload: Insulation Resistance: Endurance: Damp Heat with Load: Bending Strength: RCWV* 2.5 or max. overload voltage for 5 seconds R 0.05% R 0.2% >7k R 0.5% R 0.5% for high power rating R 0.05% R 0.3% R 0.5% for high power rating 70 2C, max. working voltage for 1000hrs with 1.5hrs "ON" and 0.5 hrs "OFF" R 0.05% Solderability: R 0.2% 95% min. coverage Resistance to Soldering Heat: +25/-55/+25/+125/+25C R 0.05% R 0.2% R 0.2% for high power rating >1000M R 0.05% Dielectric Withstand Voltage: R 0.2% By Type Apply 100VDC for 1 minute 40 2C, 90 - 95% R.H. max. working voltage hrs with 1.5hrs "ON" and 0.5hrs "OFF" Bending amplitude 3mm for 10 seconds 245 5C for 3 seconds 260 5C for 10 seconds Max. overload voltage for 1 minute Thermal Shock: R 0.05% R 0.25% Low Temperature Operation: R 0.05% R 0.2% R 0.5% for high power rating -55C to +150C, 100 cycles 1 hour, -65C, followed by 45 minutes of RCWV Reference Standards: MIL-STD-202, JIS-C 5201-1 Storage Temperature: 253C; Humidity < 80%RH 1773272 CIS WR 04/2012 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help SMD High Power Precision Resistors Type RP73 Series Power Derating Curve 100 Rated Load (%) 80 60 40 20 0 -55 -40 -20 0 20 40 60 70 80 100 120 140 155 Ambient Temperature (C) For resistors operated in ambient temperatures above 70C, power rating must be derated in accordance with this curve. Dimensions L D W t C 1. Alumina Substrate 4. Edge Electrode (NiCr) 7. Resistor Layer (NiCr) 2. Bottom Electrode (Ag) 5. Barrier Layer (Ni) 8. Overcoat (Epoxy) 3. Top Electrode (Ag-Pd) 6. External Electrode (Sn) 9. Marking Part Number L W t D C Weight (g) 1000 pieces RP73 1E (0402) 1.00 0.05 0.50 0.05 0.30 0.05 0.20 0.10 0.20 0.10 0.54 RP73(P) 1J (0603) 1.55 0.10 0.80 0.10 0.45 0.10 0.30 0.20 0.30 0.20 1.83 RP73(P) 2A (0805) 2.00 0.15 1.25 0.15 0.55 0.10 0.30 0.20 0.40 0.25 4.71 RP73 2B (1206) 3.05 0.15 1.55 0.15 0.55 0.10 0.42 0.20 0.35 0.25 9.02 RP73 2E (1210) 3.10 0.15 2.40 0.15 0.55 0.10 0.40 0.20 0.55 0.25 10.00 RP73 2H (2010) 4.90 0.15 2.40 0.15 0.55 0.10 0.60 0.30 0.50 0.25 23.61 RP73 3A (2512) 6.30 0.15 3.10 0.15 0.55 0.10 0.60 0.30 0.50 0.25 38.08 Marking Codes - Case Sizes 0805 to 2512 IEC 4 Digit Marking Resistance: 100 2.2K 10K 49.9K 100K Marking Code: 1000 2201 1002 4992 1003 Case Sizes 0603 E24 3 Digit Marking - Example: 101=100 102=1K E24 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 E96 3 Digit Marking - Examples: 14C=13K7, 13C=13K3, 68B=4K99, 68X=49.9 14C 1773272 CIS WR 04/2012 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help SMD High Power Precision Resistors Type RP73 Series 0603 E96 Marking Code Table Code E96 Code E96 Code E96 Code E96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Recommend Land Pattern Type A B C RP73 1E (0402) 0.5 0.5 0.60 0.2 RP73(P) 1J (0603) 0.8 1.0 0.90 0.2 RP73(P) 2A (0805) 1.0 1.0 1.35 0.2 RP73 2B (1206) 2.0 1.15 1.70 0.2 RP73 2E (1210) 2.0 1.15 2.50 0.2 RP73 2H (2010) 3.6 1.4 2.50 0.2 RP73 3A (2512) 4.9 1.6 3.10 0.2 1773272 CIS WR 04/2012 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help SMD High Power Precision Resistors Type RP73 Series Packaging Quantity & Reel Specifications Type oA oB oC W T Paper Tape (EA) Embossed Plastic Tape (EA) RP73 1E (0402) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - RP73(P) 1J (0603) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - RP73(P) 2A (0805) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - RP73 2B (1206) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - RP73 2E (1210) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - RP73 2H (2010) 178.0 1.0 60.0 +1.0 13.5 0.7 13.5 1.0 15.5 1.0 - 1000 / 4000 RP73 3A (2512) 178.0 1.0 60.0 +1.0 13.5 0.7 13.5 1.0 15.5 1.0 - 1000 / 4000 * 250 piece packs supplied in sealed bags of cut tape length Paper Tape Specification A B W E F P0 P1 P2 oD0 T RP73 1E (0402) Type 0.70 0.05 1.16 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 2.00 0.05 2.00 0.05 1.55 0.05 0.40 0.03 RP73(P) 1J (0603) 1.10 0.05 1.90 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 4.00 0.10 2.00 0.05 1.55 0.05 0.60 0.03 RP73(P) 2A (0805) 1.60 0.05 2.37 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 4.00 0.10 2.00 0.05 1.55 0.05 0.75 0.05 RP73 2B (1206) 2.00 0.05 3.55 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 4.00 0.10 2.00 0.05 1.55 0.05 0.75 0.05 RP73 2E (1210) 2.75 0.05 3.40 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.05 4.00 0.10 2.00 0.05 1.60 0.10 0.75 0.05 1773272 CIS WR 04/2012 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help SMD High Power Precision Resistors Type RP73 Series Embossed Plastic Tape Specifications Type A B W E F P0 P1 P2 oD0 T RP73 2H (2010) 2.85 0.10 5.45 0.10 12.0 0.10 1.75 0.10 5.5 0.05 4.00 0.05 4.00 0.10 2.00 0.05 1.50 +0.10 1.00 0.20 RP73 3A (2512) 3.40 0.10 6.65 0.10 12.0 0.10 1.75 0.10 5.5 0.05 4.00 0.05 4.00 0.10 2.00 0.05 1.50 +0.10 1.00 0.20 How to Order RP73 C 2A 1K0 B TG Common Part Temp. Coefficient Package Size Resistor Value Tolerance Packaging 1E - 0402 100R (100 Ohms) RP73 - Standard RP73P - High Power A - 5ppm/C 1J - 0603 C - 10ppm/C 2A - 0805 D - 15ppm/C 2B - 1206 F - 25ppm/C 2E - 1210 G - 50ppm/C 2H - 2010 3A - 2512 1K0 (1000 Ohms) 10K (10,000 Ohms) 100K (100,000 Ohms) 1M0 (1,000,000 Ohms) TG - Cut Tape (250 pcs) A - 0.05% B - 0.1% D - 0.5% F - 1% TDF - Reel (1000 pcs) TD - Reel (5000 pcs) TDG - Reel (250 pcs) TE - Reel (4000 pcs) 2H & 3A only TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: RP73D2A20R5BTDF