3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M HDC Socket
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series
Ideal for parallel four-row PCB stacking•
Press-Fit tail requires only flat push tool for •
installation
Mates with four-row single-bay headers and plugs•
Optional feed-through tails•
See Regulatory Information Appendix (RIA) for •
chemical compliance information
Date Modied: March 25, 2008 TS-1138-C
Sheet 1 of 3
Physical
Insulation:
Material: Glass Filled Thermoplastic (LCP)
Flammability: UL 94V-0
Color: Black
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [ 1.27 μm ] min. Nickel
Wiping Area: See Ordering Information
Termination Area: See Ordering Information
Marking: Part Number and Date Code
Electrical
Current Rating: 3.0 A
Insulation Resistance: 1 x 103 M Ω min. at 500 VDC
Withstanding Voltage: 900 VAC for 1 minute
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: Maximum 260°C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M HDC Socket
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series
TS-1138-C
Sheet 2 of 3
4-Row Single Bay
Inch
[mm]
±.005
±.1 ±.01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M HDC Socket
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series
TS-1138-C
Sheet 3 of 3
Ordering Information
HDC - RXXX - 41XX - XXXX
Termination Style / Lead length - Dim. F
P1 - Press-t / 0.250″ (6.35)
P2 - Press-t / 0.550″ (13.97)
S1 - Solder / 0.157″ (3.99)
Contact Quantity:
See Table
Plating Options: (See Plating Chart)
Product Table/Dimensions for 4-Row, Single Bay
Description Contact
Quantity ABCD Description Contact
Quantity ABCD
HDC-R060-41XX-XXXX 60 2.250 1.950 1.400 1.524 HDC-R180-41XX-XXXX 180 5.250 4.950 4.400 4.524
]19.411[]67.111[]37.521[]53.331[]17.83[]65.53[]35.94[]51.75[
HDC-R076-41XX-XXXX 76 2.650 2.350 1.800 1.924 HDC-R200-41XX-XXXX 200 5.750 5.450 4.900 5.024
]16.721[]64.421[]34.831[]50.641[]78.84[]27.54[]96.95[]13.76[
HDC-R080-41XX-XXXX 80 2.750 2.450 1.900 2.024 HDC-R216-41XX-XXXX 216 6.150 5.850 5.300 5.424
]77.731
[]26.431[]95.841[]12.651[]14.15[]62.84[]32.26[]58.96[
HDC-R100-41XX-XXXX 100 3.250 2.950 2.400 2.524 HDC-R220-41XX-XXXX 220 6.250 5.950 5.400 5.524
]13.041[]61.731[]31.151[]57.851[]11.46[]69.06[]39.47[]55.28[
HDC-R120-41XX-XXXX 120 3.750 3.450 2.900 3.024 HDC-R240-41XX-XXXX 240 6.750 6.450 5.900 6.024
]10.351[]68.941[]38.361[]54.171[]18.67[]66.37[]36.78[]52.59[
HDC-R128-41XX-XXXX 128 3.950 3.650 3.100 3.224 HDC-R260-41XX-XXXX 260 7.250 6.950 6.400 6.524
]17.5
61[]65.261[]35.671[]51.481[]98.18[]47.87[]17.29[]33.001[
HDC-R140-41XX-XXXX 140 4.250 3.950 3.400 3.524 HDC-R280-41XX-XXXX 280 7.750 7.450 6.900 7.024
]14.871[]62.571[]32.981[]58.691[]15.98[]63.68[]33.001[]59.701[
HDC-R160-41XX-XXXX 160 4.750 4.450 3.900 4.024 HDC-R300-41XX-XXXX 300 8.250 7.950 7.400 7.524
]11.191[]69.781[]39.102[]55.902[]12.201[]60.99[]30.311[]56.021[
HDC-R168-41XX-XXXX 168 4.950 4.650 4.100 4.224 HDC-R320-41XX-XXXX 320 8.750 8.450 7.900 8.024
]18.302[]66.002[]36.412[]52.222[]92.701[]41.401[]11.811[]37.521[
Plating
Suffix
Press-Fit
Terminations
Solder Tail
Terminations Plating Composition
TR (RIA E2 & C2 apply) (RIA E3 & C2 apply)
3 µ" [0.08 µm] Min. Au over
7µ" [0.18 µm] PdNi area 1
100 µ" [2.54 µm] Min. Tin Lead area 4
50 µ" [1.27 µm] Min. Ni all over
TG30 (RIA E2 & C2 apply) (RIA E3 & C2 apply)
30 µ" [0.76 µm] Min. Au Area 1
100 µ" [2.54 µm] Min. Tin Lead Tail Area 4
50 µ" [1.27 µm] Min. Ni all over
HM (RIA E1 & C1 apply) (RIA E1 & C1 apply)
3 µ" [0.08 µm] Min Au on Area 1
100 µ" [2.54 µm] Min. Whisker Mitigating
Matte Tin on Area 4
50 µ" [1.27 µm] Min. Ni all over
KR (RIA E1 & C1 apply) (RIA E1 & C1 apply)
30 µ" [0.76 µm] Min. Au on Area 1
100 µ" [5.08 µm] Min. Whisker Mitigating
Matte Tin on Area 4
50
µ
"
[
1.27 µm]
µ
Min. Ni all over
Plating
Suffix
Press-Fit
Terminations
Solder Tail
Terminations Plating Composition
GG30 (RIA E2 & C2 apply) (RIA E3 & C2 apply)
30 µ" [0.76 µm] Min. Au on area 1
10 µ" [0.25 µm] Min. Au on area 2
100 µ" [2.54 µm] Min Tin Lead on area 3
50
µ
"
[
1.27
µ
m
]
Ni all over
RR (RIA E2 & C2 apply) (RIA E3 & C2 apply)
3 µ" [0.08 µm] Min. Au over
7µ" [0.18 µm] PdNi area 1 and 2
100 µ" [2.54 µm] Min Tin Lead on area 3
50
µ
"
[
1.27
µ
m
]
Min. Ni all over
Plating Chart (S1 & P1 Termination Styles ONLY)
Plating Chart (P2 Termination Styles ONLY)
7 µ" [0.18 µm] PdNi on area 1
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-D
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects 3M is a trademark of 3M Company.
Appendix C3: China RoHS
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.