Tyco Electronics Corporation
Harrisburg, PA
www.tycoelectronics.com
1307895–5M–LUG–FP–4-10
Fiber Optic Products
Catalog 1307895 Revised 4-10 Fiber Optic Products
Cat1307895_2010_Cover_v2.qxp:TE_Cover+Spine Master.qxp 4/12/10 2:29 PM Page 1
2
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Introduction
Fiber Optic Products Catalog
Restriction on the use of Hazardous Substances (RoHS)
At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed
more than 1.5 million end items/components for RoHS compliance, and issued new
part numbers where any change was required to eliminate the restricted materials. Part
numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS Compliant, unless
marked otherwise. These products comply with European Union Directive 2002/95/EC
as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexava-
lent chromium, PBB, and PBDE in certain electrical and electronic products sold into
the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant
are products that are clearly “Out of Scope” of the RoHS Directive such as hand tools
and other non-electrical accessories.
Non-RoHS Compliant — These part numbers are identified with a “⽧” symbol.
These products do not comply with the material restrictions of the European Union
Directive 2002/95/EC.
NOTE: Information regarding RoHS compliance is provided based on reasonable
inquiry of our suppliers and represents our current actual knowledge based on the
information provided by our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to
answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked
Questions) is available with links to more detailed information. You can also submit
RoHS questions and receive a response within 24 hours during a normal work week.
The Support Center also provides:
■Cross-Reference from
Non-compliant to Compliant Products
■Ability to browse RoHS Compliant Products in our
on-line catalog
■Downloadable Technical Data Customer Information
Presentation
■More detailed information regarding the definitions
used above
■So whatever your questions when it comes to RoHS,
we have the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
Tyco Electronics is a globally
recognized preeminent
supplier of fiber optic con-
nectors and interconnection
devices. We offer an exten-
sive variety of optical con-
nectors, cable assemblies,
fiber management systems,
and optoelectronic active
and passive components —
connectivity solutions.
With unparalleled, world-
class technologies and
high quality products,
Tyco Electronics demon-
strates its commitment to
satisfying all types of cus-
tomers. Our sales service
and support is available
globally via an extensive
network of Tyco Electronics
sales engineers, field
program managers, and
applications engineers.
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms
Export Control Act (Title 22, U.S.C.
Sec 2751, et seq.) or the Export
Administration Act of 1979, as amended
(Title 50, U.S.C., App. 2401 et seq.).
Orders may be subject to export approval
by the U.S. Government. Buyer must
comply with all applicable export laws of
all applicable jurisdictions.
Copyright 2010, 2007, 2006 and 2004
Tyco Electronics Corporation.
All Rights Reserved.
AMP, AMP NETCONNECT, AMPTRAC,
ARMOR-LIGHT, CORELINK, DUALAN,
FIBRBOSS, FIST, FOSC, FSD, LC SECURE,
LIGHTCRIMP, LIGHTCRIMP PLUS,
LIGHTRAY, LIGHTRAY MPX,
LIGHTRAY OFX, MPO SECURE,
MT-RJ SECURE, NETCONNECT,
PARALIGHT, PARA-OPTIX, PRO BEAM,
PRO-CRIMPER, TE (logo) and
Tyco Electronics are trademarks of the
Tyco Electronics group of companies and
its licensors.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
See inside back cover for Global
Contacts and phone numbers.
Additional Fiber Optic products available through Tyco Electronics:
Rugged Fiber Optic products can be found in Catalog 1308940
(Connectors for Aerospace, Defense and Marine)
Netconnect Fiber Optic products can be found in Catalog 82164
(AMP Netconnect Product Catalog)
3
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
WHAT’S NEW IN THIS ISSUE
Fiber Optic Products Catalog
PARALIGHT Active Optical Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 8-11
40Gb/s QDR QSFP+Cable
Assemblies
■100 meters + length
■Functions like a standard
electrical cable
■Low latency – 15.84pc +
cable
■1/3 size and 1/10 weight of
copper assemblies
20Gb/s DDR QSFP and CX-4
Cable Assemblies
■Reach 150 meters and
greater
■Available in QSFP, CX-4,
and hybrid (QSFP-CX-4)
configurations
Fiber to the Antenna Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 71-96
■Designed for next generation WiMax and LTE Applications
■Robust designs for external antenna applications
■Broad range of solutions including traditional products and
direct Tx mating solutions
ODVA Compliant Connector —
Economic Robust Design
■All plastic
■IP-67 rated
■Rated for outdoor applications
ODC – Traditional Fiber to the
Antenna Applications
■Robust all metal connector
■Significant product already deployed
■Available in Duplex or Quad
Direct Attach
■Mates directly through the box to the Tx
■Eliminates one cable assembly internal
to the antenna box
10 Gigabit Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 12-13
■Supports IEEE 802.ae 10BASE-SR and 10GBASE-LX4 to 300m
■Complies with OM-3 fiber specifications of 2nd edition ISO
11801
■Allows Gigabit Ethernet 1000BASE-SX to 1000m
■Supports 50/125um legacy LED and laser-based applications
■This section outlines all the parts needed for an end-to-end
system with 10 Gigabit cable assemblies and connectors
MPO on Round Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
■Flexible round outer jacket for easier installation
and cable routing
■Same standards compliant performance
■Fiber counts up to 24 for standard MPO, and up to
72 fibers using high density PARA-OPTIX
assemblies
ODC is a product and trademark of
HUBER+SUHNER AG.
ODVA is a trademark of ODVA, Inc.
4
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
TABLE OF CONTENTS
Introduction............................................................................................. 2
What’s New In This Issue............................................................................. 3
Table of Contents.................................................................................... 4-6
Section 1 — Cable Assemblies & Backplane Interconnects ................................ 7-27
PARALIGHT Active Optical Cable Assemblies.................................................................... 8-11
10 Gigabit Fiber Optic Products Overview
MTP/MPO Round Cable Assemblies.......................................................................... 12
LC Cable Assemblies................................................................................................. 12
LC and SC Connector Kits ......................................................................................... 13
LC and SC Adapters .................................................................................................. 13
MPO Cable Assemblies
MTP/MPO Round Cable Assemblies.......................................................................... 14
MTP/MPO Breakout Cable Assemblies...................................................................... 15
MPO Connectors and Adapters ................................................................................. 16
PARA-OPTIX High Density Cable Assemblies ........................................................... 17
MPX Backplane Solutions.............................................................................................. 18-26
LIGHTRAY MPX Connector ........................................................................................ 18
Bulkhead Coupling Adapter....................................................................................... 19
Backplane Housings and Adapters ...................................................................... 19-21
Fanout Assemblies ..................................................................................................... 22
Mini Trunk Assemblies................................................................................................ 22
Trunk Assemblies ....................................................................................................... 22
Singlemode — Standard Loss LIGHTRAY MPX Assemblies ............................... 23, 24
Dust Covers, Cleaning Kit and Connector Microscope Adapters ............................. 25
Cleaners ..................................................................................................................... 26
Simplex and Duplex Fiber Assemblies................................................................................. 27
Section 2 — Connectors, Adapters, Tooling & Accessories............................... 29-60
LC Connectors .............................................................................................................. 30-35
LC Connector Kits ................................................................................................ 30, 31
LC Connector Components.................................................................................. 32, 33
LC Adapters................................................................................................................. 34, 35
SC Connectors .............................................................................................................. 36-38
SC Connector Kits ...................................................................................................... 36
SC Connector Components ................................................................................. 37, 38
SC Adapters ................................................................................................................. 39-41
SC to SC Adapters ............................................................................................... 39, 40
SC to ST Hybrid Adapters .................................................................................... 40, 41
Slide-On Retractable Cover for SC Simplex or Duplex Applications......................... 41
ST Connectors and Adapters.......................................................................................... 42-45
ST Connector Kits....................................................................................................... 42
ST Connector Components ........................................................................................ 43
ST Active Device Mounts ........................................................................................... 43
5
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
TABLE OF CONTENTS (Continued)
FC Connectors ................................................................................................................... 44
FC Connector Kits ...................................................................................................... 44
FC Adapters................................................................................................................. 44, 45
FC to FC Adapters...................................................................................................... 44
FC to ST Hybrid Adapters .......................................................................................... 45
FC to SC Hybrid Adapters.......................................................................................... 45
ESCON Connector............................................................................................................... 46
FSMA Connector ................................................................................................................ 46
FSMA Adapter.................................................................................................................... 46
MT-RJ SECURE Connectors................................................................................................. 47
LIGHTCRIMP PLUS No Epoxy, No Polish LC, SC and ST Connectors ....................................... 48
Tooling......................................................................................................................... 49-56
Section 3 — Fiber Management & Capabilities ............................................ 57-62
Fiber Management Systems ............................................................................................... 58
LIGHTRAY OFX Optical Fiber Circuit Assemblies .................................................................. 59
On Card Fiber Management ................................................................................................ 60
Enclosures and Customer Interface Panels .......................................................................... 61
Laser Process for Fibershape Products................................................................................ 62
Section 4 — Other Products and Capabilities ............................................... 63-70
AMP NETCONNECT Premises Wiring Products...................................................................... 64
Telecom Outside Plant Products ......................................................................................... 65
Attenuators .................................................................................................................. 66-69
Switches ........................................................................................................................... 70
Section 5 — Fiber to the Antenna Rugged Interconnect ................................... 71-96
Introduction....................................................................................................................... 72
FULLAXS Fiber to the Antenna Rugged Interconnect............................................................. 73
ODC™ Plug and Socket Cable Assemblies ...................................................................... 74-78
Max-Travel Fiber to the Antenna Rugged Interconnect .......................................................... 79
LC ODVA Connectors .................................................................................................... 80, 81
PRO BEAM Expanded Beam Rugged Optics Products....................................................... 82-96
Part Number Index .............................................................................. 97, 98
Tyco Electronics Global Locations................................................................. 99
ODC is a product and trademark of
HUBER+SUHNER AG.
Fiber Optic Products Catalog
6
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Engineering Notes
Section 1 — Cable Assemblies & Backplane Interconnects ................................ 7-27
PARALIGHT Active Optical Cable Assemblies.................................................................... 8-11
10 Gigabit Fiber Optic Products Overview
MTP/MPO Round Cable Assemblies.......................................................................... 12
LC Cable Assemblies................................................................................................. 12
LC and SC Connector Kits ......................................................................................... 13
LC and SC Adapters .................................................................................................. 13
MPO Cable Assemblies
MTP/MPO Round Cable Assemblies.......................................................................... 14
MTP/MPO Breakout Cable Assemblies...................................................................... 15
MPO Connectors and Adapters ................................................................................. 16
PARA-OPTIX High Density Cable Assemblies ........................................................... 17
LIGHTRAY MPX Backplane Solutions.............................................................................. 18-26
LIGHTRAY MPX Connector ........................................................................................ 18
Bulkhead Coupling Adapter....................................................................................... 19
Backplane Housings and Adapters ...................................................................... 19-21
Fanout Assemblies ..................................................................................................... 22
Mini Trunk Assemblies................................................................................................ 22
Trunk Assemblies ....................................................................................................... 22
Singlemode — Standard Loss LIGHTRAY MPX Assemblies ............................... 23, 24
Dust Covers, Cleaning Kit and Connector Microscope Adapters ............................. 25
Cleaners ..................................................................................................................... 26
Simplex and Duplex Fiber Assemblies................................................................................. 27
Cable Assemblies &
Backplane Interconnects
Fiber Optic Products Catalog
Table of Contents
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
7
1
Product Facts
■4 transmit and 4 receive
channels at 5 Gb/s and
10 Gb/s per channel
■Industry standard (SFF-8470)
electrical connector (aka
InfiniBand 4X, IB 4X, CX4*,
Fibre Channel) and QSFP/
QSFP+Connector
■Internally terminated
optics — no optical
connector to clean
■Differential data I/O per
InfiniBand version 1.2.1
■Asynchronous, internally AC
coupled inputs and outputs
■Passively cooled design —
low thermal resistance
heat path from chip to
connector shell
■Small diameter cable
(3.0 mm)
■Light weight
■Tight bend radius
■Following configurations
also available. Contact your
Tyco Electronics sales
representative for details
■SFP+ 10 Gb/s single lane
■CXP 10 Gb/s twelve lane
*CX4 available in 5 Gb/s only.
Tyco Electronics’
PARALIGHT active optical
cable assemblies use
state-of-the-art technology
to provide cost effective
high data throughput
interconnects. The cables
incorporate E/O and O/E
conversion built into the
connector shell to yield a
dramatic improvement in
PCB real estate utilization.
Using 850 nm VCSEL
technology, the 5 Gb/s
active cable assemblies will
operate over a data rate of
2.5 to 5 Gb/s per lane with
an aggregate data rate of
20 Gb/s in each direction.
The 10 Gb/s active cable
assemblies will operate over
a data rate of 2.5 to 10 Gb/s
per lane with an aggregate
data rate of 40 Gb/s in each
direction.
They are available in lengths
up to 100 meters using 50
micron fiber. Longer lengths
available upon request. The
EOE circuitry is designed for
use with 8B/10B encoded
data streams, such as
InfiniBand, Fibre Channel,
and XAUI.
QSFP connector style
supports connections for an
I2C serial interface, which
can be used to identify the
product and performance
capabilities.
Applications
■High Performance
Computing Clusters
■Supercomputers
■High End Servers
■Mass Storage
■Metro Network Switch/Cross
Connect
■High End Carrier Class
Routers
■SDR, QDR and DDR
InfiniBand Applications
■Other 2.5–10.0 Gb/s
Applications (e.g. 10 Gb
Fibre Channel or 10 Gig
Ethernet XAUI on ports
providing InfiniBand pinout
3.3 V power)
Mechanical/Environmental
■Up to 100 meters — longer
lengths available upon
request
■25 mm bend radius
■Operating Case Temperature
0° C to 70° C
■Storage Temperature -40° C
to 85° C
Materials
■OFNR/CSA-FT-6 (plenum)
cable
■OFN-LS (LSZH rated) cable
Technical Document
Product Specification
108-2330
Fibre Channel is a trademark of the Fibre
Channel Industry Association.
INFINIBAND is a trademark of the
InfiniBand Trade Association.
XAUI is a trademark of the 10Gigabit
Ethernet Alliance XAUI Interoperability
Group.
Fiber Optic Products Catalog
PARALIGHT Active Optical Cable Assemblies
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
8
Product Dimensions
IB 4X to QSFP/QSFP+
Front Panel Door Clearance Typical 5 Gb/s Eye Diagram
(PRBS2^7-1 with crosstalk)
108.00
[4.252] Min.
75.00
[2.953] Min.
I/O Plate
Typical 10 Gb/s Eye Diagram
(PRBS2^7-1 with crosstalk)
Cable Assemblies &
Backplane Interconnects
Fiber Optic Products Catalog
PARALIGHT Active Optical Cable Assemblies (Continued)
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
9
1
5 Gb/s Part Numbers 5 GB/S 5 GB/S 5 GB/S 10 GB/S
Length Cable CX4*** CX4 to QSFP QSFP QSFP+
(meters) Type Part Numbers Part Numbers Part Numbers Part Numbers
2OFNP** 2064782-1 2064781-1 2064778-1 2064779-1
LSZH* 2064815-1 2064814-1 2064812-1 2064813-1
3OFNP** 2064782-2 2064781-2 2064778-2 2064779-2
LSZH* 2064815-2 2064814-2 2064812-2 2064813-2
5OFNP** 2064782-32064781-32064778-32064779-3
LSZH* 2064815-32064814-32064812-32064813-3
10 OFNP** 2064782-4 2064781-4 2064778-4 2064779-4
LSZH* 2064815-4 2064814-4 2064812-4 2064813-4
15 OFNP** 2064782-5 2064781-5 2064778-5 2064779-5
LSZH* 2064815-5 2064814-5 2064812-5 2064813-5
20 OFNP** 2064782-6 2064781-6 2064778-6 2064779-6
LSZH* 2064815-6 2064814-6 2064812-6 2064813-6
25 OFNP** 2064782-7 2064781-7 2064778-7 2064779-7
LSZH* 2064815-7 2064814-7 2064812-7 2064813-7
30OFNP** 2064782-8 2064781-8 2064778-8 2064779-8
LSZH* 2064815-8 2064814-8 2064812-8 2064813-8
40 OFNP** 2064782-9 2064781-9 2064778-9 2064779-9
LSZH* 2064815-9 2064814-9 2064812-9 2064813-9
50 OFNP** 1-2064782-0 1-2064781-0 1-2064778-0 1-2064779-0
LSZH* 1-2064815-0 1-2064814-0 1-2064812-0 1-2064813-0
100 OFNP** 1-2064782-1 1-2064781-1 1-2064778-1 1-2064779-1
LSZH* 1-2064815-1 1-2064814-1 1-2064812-1 1-2064813-1
*LSZH = Low Smoke Zero Halogen
**OFNP = Optical Fiber Nonconductive Plenum
***Also known as CX4 and SFF-8470
Note: Longer lengths available upon request.
5 GB/S
General Specifications
Symbol Parameter Min. Typical Max. Unit Notes
Data Rate/Channel 2.5 — 5 Gb/s 1
Tc Operating Case Temperature 0 — 70 °C 2
Vcc Supply Voltage 3.133.33.47 V
Total Power Dissipation — 1.31.5 W 3
Fiber Core Diameter — 50 — µm
1. Test pattern PRBS 2E7-1
2. Per End
3. Central office environment per GR-468-CORE
5 GB/S Transmitter
Electrical Specifications
Symbol Parameter Min. Typical Max. Unit Notes
Input Common Mode 0 — Vcc V 1
V_diff_IN Differential data swing 650 — 1600 mVpp
Rin Differential Input Impedance 80 100 120 Ω
1. Internally AC coupled.
5 GB/S Receiver
Electrical Specifications
Symbol Parameter Min. Typical Max. Unit Notes
Output Common Mode — — — V 1
V_diff_OUT Differential data swing 200 300 1200 mVpp
Rout Differential Output Impedance — 100 — Ω
TJ Total Jitter (p-p) — — .42 UI 2
ΔT ch-ch Skew — — 200 ps
1. Internally AC Coupled.
2. Total jitter is specified at a BER of 10^-12 using PRBS 2^7-1.
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
PARALIGHT Active Optical Cable Assemblies (Continued)
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
10
10 GB/S
General Specifications
Symbol Parameter Min. Typical Max. Unit Notes
Data Rate/Channel 2.5 — 10.0 Gb/s 1
Tc Operating Case Temperature 0 — 70 °C 2
Vcc Supply Voltage 3.133.33.47 V
Total Power Dissipation — 1.5 1.7 W 3
Fiber Core Diameter — 50 — µm
1. Test pattern PRBS 2E7-1
2. Per End
3. Central office environment per GR-468-CORE
10 GB/S Transmitter
Electrical Specifications
Symbol Parameter Min. Typical Max. Unit Notes
Input Common Mode 0 — Vcc V 1
V_diff_IN Differential data swing 500 — 1600 mVpp
Rin Differential Input Impedance 80 100 120 Ω
1. Internally AC coupled.
10 GB/S Receiver Electrical
Specifications
Symbol Parameter Min. Typical Max. Unit Notes
Output Common Mode — — — V 1
V_diff_OUT Differential data swing 200 300 1200 mVpp
Rout Differential Output Impedance — 100 — Ω
TJ Total Jitter (p-p) — — .42 UI 2
ΔT ch-ch Skew — — 200 ps
1. Internally AC Coupled.
2. Total jitter is specified at a BER of 10^-12 using PRBS 2^7-1.
Mechanical Symbol Parameter Value Unit Notes
Off Axis Load 22.2 N
Retention Load 89 N
Durability 250 cycles
Regulatory Information Symbol Parameter Compliance
Preliminary Eye Safety Classification11M
Electrostatic Discharge (ESD), JESD22-A114D, Class 1 (1000 volts),
human body human body model
Optical energy contained within cable.
CAUTION: Do not cut optical cable. Viewing the cut fiber ends, especially with certain optical instruments (for exam-
ple, eye loupes, magnifiers, and microscopes) may pose an eye hazard.
This product is classified as a Class 1M Laser product in accordance with IEC 60825-1:1993+A1+A2 and complies
with 21CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice N0. 50, dated 24-Jun-2007.
Note: The TUV Bauartmark does not apply to LSZH assemblies
INVISIBLE LASER RADIATION
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS “(MAGNIFIERS)”
CLASS 1M LASER PRODUCT
840-850nm, 700uW
Cable Assemblies &
Backplane Interconnects
Fiber Optic Products Catalog
PARALIGHT Active Optical Cable Assemblies (Continued)
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
11
1
MTP/MPO Round
Cable Assemblies
QSFP Compatible MPO to MPO
Fiber Type Fiber Length Part Number
Count in meters
11938323-1
51938323-5
10 Gig / OM3 (50/125) 8 10 1-1938323-0
20 2-1938323-0
50 5-1938323-0
12-Fiber Reversed Fiber Path MPO to MPO
Fiber Type Fiber Length Part Number
Count in meters
11938324-1
51938324-5
10 Gig / OM3 (50/125) 12 10 1-1938324-0
20 2-1938324-0
50 5-1938324-0
LC Cable Assemblies
Simplex / Part Numbers/Lengths (m)
Duplex Cable Type Side A Side B Jacket Type Part Number 12351015
LC Cable Assemblies
Duplex 50/125 OM3 LC LC 2 mm jacketed riser X-2064862-X 2064862-1 2064862-2 2064862-3 2064862-5 1-2064862-0 1-2064862-5
10Gig Fiber LC SC 2 mm jacketed riser X-2064863-X 2064863-1 2064863-2 2064863-3 2064863-5 1-2064863-0 1-2064863-5
SC Cable Assemblies
Simplex 50/125 OM3 SC SC 2 mm jacketed riser X-2064883-X 2064883-1 2064883-2 2064883-3 2064883-5 1-2064883-0 1-2064883-5
10Gig Fiber
50/125 OM3 SC SC 2 mm jacketed riser X-2064886-X 2064886-1 2064886-2 2064886-3 2064886-5 1-2064886-0 1-2064886-5
Duplex 10Gig Fiber
50/125 OM3 SC ST 2 mm jacketed riser X-2064889-X 2064889-1 2064889-2 2064889-3 2064889-5 1-2064889-0 1-2064889-5
10Gig Fiber
ST Cable Assemblies
Simplex 50/125 OM3 ST ST 2 mm jacketed riser X-2064877-X 2064877-1 2064877-2 2064877-3 2064877-5 1-2064877-0 1-2064877-5
10Gig Fiber
Duplex 50/125 OM3 ST ST 2 mm jacketed riser X-2064880-X 2064880-1 2064880-2 2064880-3 2064880-5 1-2064880-0 1-2064880-5
10Gig Fiber
MT-RJ SECURE Cable Assemblies
50/125 OM3 MT-RJ MT-RJ 1.8 mm jacketed riser X-6588572-X 6588572-1 6588572-2 6588572-3 6588572-5 1-6588572-0 1-6588572-5
Duplex 10Gig Fiber
50/125 OM3 MT-RJ SC 1.8 mm jacketed riser X-6588573-X 6588573-1 6588573-2 6588573-3 6588573-5 1-6588573-0 1-6588573-5
10Gig Fiber
Additional lengths available. See Tyco Electronics specification 1206850 for more details
For custom configurations, contact your Tyco Electronics sales representative.
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
10 Gigabit Fiber Optic Products Overview
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
12
LC and SC Connector Kits
LC Connector Kits — Standard Kits
Description Fiber Type Housing Boot Used with Assembly Pack
Color Color Part Number
900 µm Buffered 2064938-1
Simplex Multimode Beige Beige 1.6-2.0 mm Jacketed 2064938-2
3.0 mm Jacketed 2064938-3
900 µm Buffered 2-2064938-1
Duplex Multimode Beige Beige 1.6-2.0 mm Jacketed 2-2064938-2
3.0 mm Jacketed 2-2064938-3
SC Connector Kits — Standard Kits
Description Fiber Type Housing Boot Used with Assembly Pack
Color Color Part Number
900 µm Buffered 2064939-1
Simplex Multimode Beige Beige 2.0 mm Jacketed 2064939-2
3.0 mm Jacketed 2064939-3
Duplex Multimode Beige Beige 2.0 mm Jacketed 5504928-1
3.0 mm Jacketed 5504657-1
LC and SC Adapters LC Duplex Adapter for SC Cutout — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Ceramic Flanged Aqua 1-6457567-6
Flangeless Aqua 1-6457567-4
Metal Flanged Aqua 2-6457567-0
Flangeless Aqua 1-6457567-8
Shuttered LC Duplex Adapter for SC Cutout — Plastic
Alignment Shutter
Sleeve Description Housing Label Part
Material Color Color Number
Ceramic Flanged Aqua Aqua 1-2064658-6
Flangeless Aqua Aqua 1-2064752-4
LC Quad Adapter for SC Duplex Cutout — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Ceramic Flanged Aqua 1-1695790-0
Flangeless Aqua 1-1695790-1
Metal Flanged Aqua 1695790-9
SC Simplex Adapter — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Ceramic Flanged Aqua 2-5502632-4
Flangeless Aqua 5504632-6
Metal Flanged Aqua 2-5502632-3
SC Duplex Adapter — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Ceramic Flanged Aqua 2-5502776-6
Metal Flanged Aqua 2-5502776-5
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
10 Gigabit Fiber Optic Products Overview (Continued)
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
13
1
10 GIG Overview
MTP/MPO Round
Cable Assemblies
Suitable for Interface to
Transceiver
Product Facts
■Flexible round outer jacket
for easier installation/
routing
■Available in fiber counts up
to 24
■Fiber path reversed or
straight
Applications
■Transceiver interface
■High density interconnect
for optical switches,
routers, PC cards
Options
■Fiber Types
■Singlemode
■Low Loss Singlemode
■50/125 µm OM4
■50/125 µm OM3
■50/125 µm OM2
■62.5/125 µm
■Bend insensitive fiber
G657A or G657B
■Cable Ratings
■Riser rated, UL-OFNR
■Plenum rated, UL-OFNP
■Low Smoke, Zero
Halogen rated, LSZH
For custom configurations, contact your Tyco Electronics sales representative.
L
Fiber Optic Cable
3 mm Round
MPO Connector, mm
No Pins, 2 Plcs.
QSFP Compatible MPO to MPO
Fiber Type Fiber Count Length in meters Part Number
11938323-1
10 Gig / 51938323-5
OM3 (50/125) 8 10 1-1938323-0
20 2-1938323-0
50 5-1938323-0
11938208-1
51938208-5
OM2 50/125 8 10 1-1938208-0
20 2-1938208-0
50 5-1938208-0
Reverse Fiber Path
MPO Left MPO Right
Fiber # Fiber #
112
211
310
49
5 Not Connected 8
6 Not Connected 7
7 Not Connected 6
8 Not Connected 5
94
10 3
11 2
12 1
12-Fiber Reversed Fiber Path MPO to MPO
Fiber Type Fiber Count Length in meters Part Number
11938324-1
10 Gig / 51938324-5
OM3 (50/125) 12 10 1-1938324-0
20 2-1938324-0
50 5-1938324-0
11938209-1
51938209-5
OM2 50/125 12 10 1-1938209-0
20 2-1938209-0
50 5-1938209-0
Reverse Fiber Path
MPO Left MPO Right
Fiber # Fiber #
112
211
310
49
58
67
76
85
94
10 3
11 2
12 1
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
MPO Cable Assemblies
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
14
MTP/MPO Breakout
Cable Assemblies
Suitable for
Telecommunication and
Data Communication
Equipment
Options include:
■Ribbon or Round Cable
■Fiber counts up to 24
■Fiber Types
■Singlemode
■Low Loss Singlemode
■50/125 µm OM3
■50/125 µm OM2
■62.5/125 µm
■Bend insensitive fiber
G657A or G657B
■Cable Ratings
■Riser rated, UL-OFNR
■Plenum rated, UL-OFNP
■Low Smoke, Zero
Halogen rated, LSZH
■Connector Types
■LC
■SC
■ST
■FC
■MU
■MT-RJ SECURE Connector
■Different configurations
available upon request
MPO to LC Duplex
8 Fiber Straight Through on Ribbon Fiber
L
P1
P2
P3
P4
P5
P6
MPO to LC Duplex
12 Fiber Straight Through on Round Cable
Cable Assemblies &
Backplane Interconnects
Fiber Optic Products Catalog
MPO Cable Assemblies (Continued)
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
15
1
Product Facts
■Tested to Telecordia GR-1435
■Push Pull Latching
■4, 8, 12, OR 24 fibers
■Color-coded housings
differentiate singlemode
and multimode:
■Multimode — Beige
■Singlemode — Green
■Manufactured to IEC
Standards 61754-7 and
TIA/EIA 604-5
Industry Standard
Performance Characteristics
Singlemode
Insertion Loss (Typ.) — 0.25 dB
Insertion Loss (Max.) — 0.75 dB
Return Loss — > 55 dB
Multimode
Insertion Loss (Typ.) — 0.2 dB
Insertion Loss (Max.) — 0.5 dB
Return Loss — > 20 dB
MPO Connector Kit Selection — Plug Kits
Fiber Type Female (no pins) Male (with pins)
Singlemode 6457981-1 6457981-2
Multimode 6457983-1 6457983-2
Note: Ferrules and Mini-Boots are sold separately. See chart below for
proper part numbers.
MPO Ferrule Kit with Mini-Boot
Fiber Type 4 Position 8 Position 12 Position
Singlemode 5492221-1 5492221-2 5492221-3
Multimode 5503839-1 5503839-2 5503839-3
MPO Simplex Adapters
Adapter Type Part Number
Adapter w/flange 1588172-1
Adapter w/flange and clip 1588172-2
Adapter w/o flange 1588172-3
Adapter w/o flange and w/clip 1588172-4
MPO Quad 30°
Adapter Type Part Number
Adapter 2064792-1
Crimping Tool with Dieset
1588698-1
44.38
[1.747]
21.30
[.839]
11.80
[.465]
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
MPO Connectors and Adapters
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
16
Product Facts
■Uses the latest generation
MT-style ferrules
■Available in up to 72 fibers
through a single MPO style
connector
■Available in 24, 48, and
72 fiber
■Other fiber counts and
lengths available
■Reduced space
requirements
■Can provide cost benefit
on a per-fiber basis
Potential Applications
■Jumpers and trunk cables
for Data Centers
■Optical backplanes
■SAN Very Short Reach
applications
Please contact your local
Sales Representative or
Tyco Electronics for detailed
performance characteristics
and specifications.
Note: “X” above denotes length. Check latest version of Tyco Electronics’ customer drawing or contact your local sales
representative for specific lengths available.
Part Number Description
6588967-X 24-fiber MPO-MPO, 50/125 Multimode
6693069-X 48-fiber MPO-MPO, 50-125 Multimode
1919166-X 72-fiber MPO-MPO, 50/125 Multimode
Part Number Description
6693068-X 48-fiber MPO — (4), 12-fiber MPO, 50/125 bare ribbon
Part Number Description
6693067-X 72-fiber MPO — (6), 12-fiber MPO, 50/125 bare ribbon
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS
compliant.
Fiber Optic Products Catalog
PARA-OPTIX High Density Cable Assemblies
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
17
1
LIGHTRAY MPX Backplane Solutions
Product Facts
■LIGHTRAY MPX
Interconnects offer a
blindmate backplane
solution
■A complete fiber optic
system which is ideal for
applications requiring
customized solutions
■Features very small, high
density LIGHTRAY MPX
connectors
■Based on industry proven
MT interconnection
technology
■Can use both multimode
(62.5/125 µm or 50/125 µm)
and singlemode (9 µm)
fiber, and is designed to
meet Bellcore GR 1435
■Saves valuable board
space on the PCB,
backplane and I/O
■Suitable for blind mate
(free floating) and
bulkhead applications.
Offers flexible fiber routing
and management
■2.5 mm of daughter card
axial travel is provided
■Misalignment pick-up
tolerance are:
± 2.0 mm horizontal
± 2.5 mm vertical
± 2 degree angular
Design Objectives
Value
Parameter Multimode Singlemode Singlemode Low Loss
Insertion Loss, Mean (typical) 0.20 dB 0.25 dB 0.20 dB
Insertion Loss, Max. 0.50 dB 0.75 dB 0.30 dB / 0.5 dB*
Return Loss, Min. 20 dB 45 dB 45 dB
Durability, 0.3 dB CIT — 200 cycles
Straight Pull 2.2N 0.3 dB change
Vibration, 10 to 55 Hz 0.3 dB change
Temperature, Storage -40° C to +85° C
Temperature Operating -40° C to +85° C
Thermal Aging, 14 Days @ +85° C 0.3 dB change
Humidity,14 days 95% Rh @ +60° C 0.3 dB change
* Low loss tested in-house to a maximum of 0.3 dB against a reference. 0.5 dB is maximum random mate loss.
LIGHTRAY MPX Connector
Tyco Electronics’
LIGHTRAY MPX
Interconnection System is
designed for blind mate
backplane and bulkhead
dense fiber-to-fiber
interconnect applications,
including stand alone
interconnections when used
with bulkhead adapters.
The LIGHTRAY MPX
Interconnection System
offers maximum flexibility,
making them ideal for cus-
tomized requirements and
solutions.
Based on the field-proven
MT ferrule technology,
the LIGHTRAY MPX
Interconnection System
features a miniature multi-
fiber connector, which holds
up to 24 fibers on 250 µm
centers.
Tyco Electronics’ LIGHTRAY
MPX Interconnection
System is multi-sourced and
features fanout assemblies,
mini trunk and trunk cable
assemblies, pre-loaded
enclosures, cable manage-
ment systems, PC card
connector housings and
tooling, bulkhead adapters
and transceiver modules
and datalinks.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
18
50.1
[1.97]
9.0
[.354]
7.3
[.287]
LIGHTRAY MPX Backplane Solutions (Continued)
Bulkhead Coupling Adapter
36.6
[1.44]
3.00
[.118]
12.00
[.472]
17.50
[.689]
23.00
[.906]
Ø 2.35
[.093] 2 Plcs.
White Ink Stripe
Part Number 492739-1
Part Number 492305-1
Backplane Housings and
Adapters
Backplane Housing —
Simplex
System Card Housing —
Simplex
Part Number 492234-1
Side View
Top View
Product Facts
■Holds one standard or low
loss LIGHTRAY MPX connector
■Simple press-fit mounting —
no hardware needed
■Unique latching provides
positive retention when card
is unmated
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
19
1
20.0 ± 0.16
[.787 ± .006]
10.2 ± 0.16
[.40 ± .006]
13.1 ± 0.10
[.515 ± .004]
11.7 ± 0.10
[.460 ± .004]
18.7 ± 0.10
[.736 ± .004]
20.00
[.787]
20.00
[.787]
17.00
[.669]
2 Plcs.
21.05
[.828]
9.25
[.364]
5.0
[.197]
11.9
[.468]
2 Plcs.
4.9
[.193]
1 Plc.
0.75
[.030]
3.4
[.134]
LIGHTRAY MPX Backplane Solutions (Continued)
Part Number 1374490-1 and 6374493-1 (with safety shutter) Backplane Housing —
Duplex
Product Facts
■Holds two standard or low loss
LIGHTRAY MPX connectors
■Optional self actuated laser
safety shutter
■Up to 48 fibers simultaneously
mated and managed
■Mates to part number
1374491-1
■Used with clip part number
1278530-2
Panel Cutout
Product Facts
■Holds two standard or
low loss LIGHTRAY MPX
connectors
■Up to 48 fibers
simultaneously mated
and managed
Part Number 1374491-1
System Card Housing —
Duplex
Backplane Housings and
Adapters (Continued)
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
20
LIGHTRAY MPX Backplane Solutions (Continued)
Product Facts
■Holds up to 4 standard or
low loss LIGHTRAY MPX
connectors
■Self actuated laser-safe
shutter
■Up to 96 fibers
simultaneously mated
and managed
Part Number 6278529-1
Backplane Housings and
Adapters (Continued)
Backplane Housing —
Quad
Product Facts
■Holds 4 standard or low loss
LIGHTRAY MPX connectors
■Up to 96 fibers
simultaneously mated
and managed
System Card Housing —
Quad
Part Number 1278391-1
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
21
1
LIGHTRAY MPX Backplane Solutions (Continued)
Mini Trunk Assemblies
Trunk Assemblies
Fanout Assemblies
Product Facts
■Multimode 62.5/125 µm and
50/125 µm
■Singlemode 9 µm, 8° angle
interface
■250 µm bare ribbon and
LSZH (Low Smoke Zero
Halogen) sheathed ribbon
cable available
■Female LIGHTRAY MPX
connectors (without guide
pins)
■4, 8, 12, 16 and 24 fibers
■Custom lengths available
■Connector labeling to guide
insertion
Product Facts
■Multimode 62.5/125 µm and
50/125 µm
■Singlemode 9 µm, 8° angle
interface
■Available with female
LIGHTRAY MPX connectors
(without guide pins) and/or
male LIGHTRAY MPX
connectors (with guide pins)
■LC, SC, ST, FC or MT-RJ
terminations available for
hybrid configurations
■4, 8 and 12 position ribbon
fiber sub-units
■LSZH (Low Smoke Zero
Halogen) sheathed cable
(round construction)
■Internal/external cable
■Custom lengths available
Product Facts
■Multimode 62.5/125 µm and
50/125 µm
■Singlemode 9 µm, 8° angle
interface
■Color coded buffered fiber
or LSZH (Low Smoke Zero
Halogen) sheathed cable
with breakout kit
■Male LIGHTRAY MPX
connectors (with guide pins)
■4, 8, 12, 16 and 24 fibers
■Custom lengths available
■Connector labeling to guide
insertion
■LC, SC, ST, FC or MT-RJ
terminations available
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
22
LIGHTRAY MPX Backplane Solutions (Continued)
Singlemode — Standard Loss LIGHTRAY MPX Pigtails
Maximum Insertion Loss 1.0dB (1310nm)
Description Part Number
4-fiber LIGHTRAY MPX (m) pigtail assy., 900 µm buffered fibers 6457078-x
8-fiber LIGHTRAY MPX (m) pigtail assy., bare ribbon 6374392-x
8-fiber LIGHTRAY MPX (f) pigtail assy., bare ribbon 6374539-x
8-fiber LIGHTRAY MPX (m) pigtail assy., 900 µm buffered fibers 6374538-x
8-fiber LIGHTRAY MPX (f) pigtail assy., 900 µm buffered fibers 6374537-x
Singlemode — Standard
Loss LIGHTRAY MPX
Pigtails
Singlemode — Low Loss LIGHTRAY MPX Pigtails
Maximum Insertion Loss 0.5dB (1310nm) Random Mate
Description Part Number
8-fiber LIGHTRAY MPX (m) pigtail assy., bare ribbon 6374448-x
8-fiber LIGHTRAY MPX (f) pigtail assy., bare ribbon 6374639-x
8-fiber LIGHTRAY MPX (m) pigtail assy., 900 µm buffered fibers 6457173-x
8-fiber LIGHTRAY MPX (f) pigtail assy., 900 µm buffered fibers 6457174-x
Note: All assemblies are customer built to customer's length specifications. Dash number indicated length.
Please contact Tyco Electronics for proper dash number.
Singlemode — Low Loss
LIGHTRAY MPX Pigtails
Singlemode — Standard Loss LIGHTRAY MPX to MPX Cable Assemblies Bare Ribbon
Maximum Insertion Loss 1.0dB (1310nm)
Description Part Number
8-fiber LIGHTRAY MPX (m) to LIGHTRAY MPX (m) assy., bare ribbon 6457394-x
8-fiber LIGHTRAY MPX (f) to LIGHTRAY MPX (f) assy., bare ribbon 6374600-x
12-fiber LIGHTRAY MPX (m) to LIGHTRAY MPX (m) assy., bare ribbon 6374743-x
Singlemode — Low Loss LIGHTRAY MPX to MPX Cable Assemblies
Maximum Insertion Loss 0.5dB (1310nm) Random Mate
Description Part Number
4-fiber LIGHTRAY MPX (m) to LIGHTRAY MPX (m) assy., bare ribbon 6457398-x
8-fiber LIGHTRAY MPX (m) to LIGHTRAY MPX (m) assy., bare ribbon 6374738-x
Note: All assemblies are customer built to customer's length specifications. Dash number indicated length.
Please contact Tyco Electronics for proper dash number.
Singlemode — Standard
Loss LIGHTRAY MPX to
MPX Cable Assemblies
Bare Ribbon
Singlemode — Low Loss
LIGHTRAY MPX to MPX
Cable Assemblies
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
23
1
LIGHTRAY MPX Backplane Solutions (Continued)
Singlemode — Standard Loss LIGHTRAY MPX to MPX Cable Assemblies Jacketed
Maximum Insertion Loss 1.0dB (1310nm)
Description Part Number
8-fiber LIGHTRAY MPX (f) to LIGHTRAY MPX (f) assy., jacketed ribbon 6374887-x
Singlemode — Standard
Loss LIGHTRAY MPX to
MPX Cable Assemblies
Jacketed
Singlemode — Standard Loss LIGHTRAY MPX to SC Cable Assemblies
Maximum Insertion Loss 1.0dB (1310nm)
Description Part Number
12-fiber LIGHTRAY MPX (m) assy. To (12) SC, ruggedized 5492515-x
Singlemode — Standard
Loss LIGHTRAY MPX to
SC Cable Assemblies
12 Plcs.
A
A
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
24
LIGHTRAY MPX Backplane Solutions (Continued)
Dust Covers Description Part Number
Simplex
System Card Board Side 1278201-1
Backplane Side 492578-1
Backplane Inside Cage 492575-1 (no insert)
5492576-1 (with insert)
503967-5 (removal tool)
Back of Cage 5502871-1
Duplex
System Card Board Side 5502871-1
Backplane Side 1374674-1
Backplane Inside Cage 6374671-1
Back of Rack 5502871-1
Quad
System Card Board Side 5502871-1
Backplane Side 1374547-1
Backplane Inside Cage 6374548-1
Back of Rack 5502871-1
Bulkhead 5502871-1
Cable 492577-1 (without strap)
492577-2 (with strap)
Cleaning Kit
Product Facts
■2 re-useable cleaning kit
assemblies
■2 LIGHTRAY MPX bulkhead
adapters
■2 LIGHTRAY MPX backplane
housings
■1 pack of 24 cleaning tool
inserts (can be ordered
separately)
Description Part Number
LIGHTRAY MPX Cleaning Kit 1278498-1
Cleaning Inserts (24/pack) 1457019-3
Connector Microscope
Adapters
Product Facts
■Designed specifically for the
LIGHTRAY MPX Connector
■Fits in standard
Tyco Electronics’ microscope
Part Number 1754767-1
■200 x power
Description Part Number*
Microscope Adapter 1828834-1
Microscope Adapter (angled) 1828835-1
* Coupling adapter Part Number 1985041-1 required.
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
25
1
Cleaners
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
26
MTP/MPO IBC Cleaner
Part Number 1918809-1
Product Facts
■Cleans male or female
MTP/MPO connectors
■Pre-washed cleaning cloth
is lint and debris free
■Each cleaner is capable of
more than 400 cleanings
■Can be used for bulkhead
and unmated MTP/MPO
cleaning
■Protective dust cover
doubles as an adapter cap
for cleaning unmated
connectors
■FOCIS 5-Type MTP/MPO
interface compliant
■Removes dust and oil
contamination
■Ideal solution for cleaning
parallel optics transceivers
MTP is a trademark of US Conec Ltd.
The MTP/MPO IBC
(In Bulkhead Cleaner) dry
cloth cleaner offered by
Tyco Electronics utilizes a
densely woven micro-fiber
cloth that cleans male (with
pins) or female MTP/MPO
connectors while in adapters,
bulkheads, faceplates, or
in unmated form with the
unique adapter/dust cover.
The unique cleaning cloth
also reduces static charge
making it one of the most
advanced cleaning systems
available for bulkhead opti-
cal connector cleaning.
Applications
For effective cleaning of:
■Male and female
MTP/MPO connectors
inside mating adapters
■Unmated male and female
MTP/MPO connectors
using included adapter
■Parallel optics
transceivers
■Networking gear includ-
ing switches and routers
■Factory or field connectors
Product Dimensions
Length — 184.2 mm [7.25 in.]
Width — 56.5 mm [2.22 in.]
Thickness — 22 mm [0.866 in.]
Adapter Length — 19.5 mm [0.759 in.]
OPTIPOP R Reel Cleaner
Product Facts
■Static attraction is
minimized
■Ultra clean micro-fiber cloth
captures debris and other
contamination
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■High-end cost effective
cleaning solution
The OPTIPOP R dry cloth
cassette cleaners offered
by Tyco Electronics utilize a
densely woven micro-fiber
cloth that cleans fiber optic
connector tips while reduc-
ing static charge. This
makes them one of the most
advanced cleaning systems
available for optical connec-
tor cleaning.
Applications
A variety of reel cleaner
configurations allow for use
on the major optical con-
nector types including FC,
SC, ST, LC, MU, ODVA con-
forming, MT-RJ SECURE
connectors, and MPO.
Product Dimensions
Length — 127 mm [5.00 in.]
Width — 83 mm [3.26 in.]
Thickness — 48 mm [1.89 in.]
Weight — 150 g [0.33 lb.]
OPTIPOP is a trademark of
NTT Advanced Technology Corporation.
Description Part Number
MPO w/pins reel cleaner 1918802-1
One slot reel cleaner; 1.25 mm, 2.5 mm, MT No Pins 1918803-1
Reel cleaner refill (six per pack) 1918806-1
Reel Cleaner Refill (Six per Pack)
Part Number 1918806-1
Simplex and Duplex Fiber Assemblies
LC Cable Assemblies
LC Loopback Cables
Simplex /
Duplex Cable Type Side A Side B Jacket Type Part Number
Singlemode LC N/A N/A 2064872-1
LC 62.5/125 LC N/A N/A 2064873-1
Loopback Multimode
Cables 50/125 LC N/A N/A 2064874-1
Multimode
SC Loopback Cables
Simplex /
Duplex Cable Type Side A Side B Jacket Type Part Number
Singlemode SC N/A N/A 5504883-1
SC 62.5/125 SC N/A N/A 5503141-2
Loopback Multimode
Cables 50/125 SC N/A N/A 5503141-1
Multimode
Simplex / Part Numbers/Lengths (m)
Duplex Cable Type Side A Side B Jacket Type Part Number 13510
LC LC 900 micron X-2064843-X 2064843-1 2064843-3 2064843-5 1-2064843-0
2 mm jacketed riser X-2064844-X 2064844-1 2064844-3 2064844-5 1-2064844-0
LC SC 900 micron X-2064845-X 2064845-1 2064845-3 2064845-5 1-2064845-0
2 mm jacketed riser X-2064846-X 2064846-1 2064846-3 2064846-5 1-2064846-0
Singlemode LC FC 2 mm jacketed riser X-2064847-X 2064847-1 2064847-3 2064847-5 1-2064847-0
LC / LC / 2 mm jacketed riser X-2064869-X 2064869-1 2064869-3 2064869-5 1-2064869-0
APC APC
Simplex LC / SC / 2 mm jacketed riser X-2064870-X 2064870-1 2064870-3 2064870-5 1-2064870-0
APC APC
LC / FC / 2 mm jacketed riser X-2064871-X 2064871-1 2064871-3 2064871-5 1-2064871-0
APC APC
50/125 LC LC 2 mm jacketed riser X-2064848-X 2064848-1 2064848-3 2064848-5 1-2064848-0
Multimode LC SC 2 mm jacketed riser X-2064849-X 2064849-1 2064849-3 2064849-5 1-2064849-0
62.5/125 LC LC 900 micron X-2064850-X 2064850-1 2064850-3 2064850-5 1-2064850-0
Multimode LC LC 2 mm jacketed riser X-2064851-X 2064851-1 2064851-3 2064851-5 1-2064851-0
LC SC 2 mm jacketed riser X-2064852-X 2064852-1 2064852-3 2064852-5 1-2064852-0
LC LC 2 mm jacketed riser X-2064853-X 2064853-1 2064853-3 2064853-5 1-2064853-0
Singlemode LC SC 2 mm jacketed riser X-2064854-X 2064854-1 2064854-3 2064854-5 1-2064854-0
LC ST 2 mm jacketed riser X-2064856-X 2064856-1 2064856-3 2064856-5 1-2064856-0
LC LC 2 mm jacketed riser X-2064858-X 2064858-1 2064858-3 2064858-5 1-2064858-0
50/125 LC SC 2 mm jacketed riser X-2064859-X 2064859-1 2064859-3 2064859-5 1-2064859-0
Multimode LC ST 2 mm jacketed riser X-2064860-X 2064860-1 2064860-3 2064860-5 1-2064860-0
Duplex LC MT-RJ 1.8 mm jacketed riser X-2064861-X 2064861-1 2064861-3 2064861-5 1-2064861-0
50/125 OM3 LC LC 2 mm jacketed riser X-2064862-X 2064862-1 2064862-3 2064862-5 1-2064862-0
10Gig Fiber LC SC 2 mm jacketed riser X-2064863-X 2064863-1 2064863-3 2064863-5 1-2064863-0
LC LC 2 mm jacketed riser X-2064865-X 2064865-1 2064865-3 2064865-5 1-2064865-0
62.5/125 LC SC 2 mm jacketed riser X-2064866-X 2064866-1 2064866-3 2064866-5 1-2064866-0
Multimode LC ST 2 mm jacketed riser X-2064867-X 2064867-1 2064867-3 2064867-5 1-2064867-0
LC MT-RJ 1.8 mm jacketed riser X-2064868-X 2064868-1 2064868-3 2064868-5 1-2064868-0
Additional lengths available. See Tyco Electronics specification 1206850 for more details.
Cable Assemblies &
Backplane Interconnects
Note: All part numbers are RoHS compliant.
Fiber Optic Products Catalog
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
27
1
Fiber Optic Products Catalog
28
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Engineering Notes
29
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Table of Contents
Fiber Optic Products Catalog
Connectors, Adapters,
Tooling & Accessories
2
Section 2 — Connectors, Adapters, Tooling & Accessories .............................. 29-60
LC Connectors .............................................................................................................. 30-35
LC Connector Kits ................................................................................................ 30, 31
LC Connector Components.................................................................................. 32, 33
LC Adapters................................................................................................................. 34, 35
SC Connectors .............................................................................................................. 36-38
SC Connector Kits ...................................................................................................... 36
SC Connector Components ................................................................................. 37, 38
SC Adapters ................................................................................................................. 39-41
SC to SC Adapters ............................................................................................... 39, 40
SC to ST Hybrid Adapters .................................................................................... 40, 41
Slide-On Retractable Cover for SC Simplex or Duplex Applications......................... 41
ST Connectors and Adapters.......................................................................................... 42-45
ST Connector Kits....................................................................................................... 42
ST Connector Components ........................................................................................ 43
ST Active Device Mounts ........................................................................................... 43
FC Connectors ................................................................................................................... 44
FC Connector Kits ...................................................................................................... 44
FC Adapters................................................................................................................. 44, 45
FC to FC Adapters...................................................................................................... 44
FC to ST Hybrid Adapters .......................................................................................... 45
FC to SC Hybrid Adapters.......................................................................................... 45
ESCON Connector............................................................................................................... 46
FSMA Connector ................................................................................................................ 46
FSMA Adapter.................................................................................................................... 46
MT-RJ SECURE Connectors................................................................................................. 47
LIGHTCRIMP PLUS Connector............................................................................................. 48
Tooling......................................................................................................................... 49-56
ESCON is a trademark of IBM
Corporation.
30
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LC Connector Kits
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
LC Connector Kits —
Standard Kits
Product Facts
■Singlemode Telcordia GR-
326 Tested (Report 501-652)
■Multimode TIA/EIA 568B.3
tested
■Components packaged in 25
piece bags for easy access
■Same one-piece connector
body for jumper and buffer
■Field installable duplex clip
■Compatible with anaerobic
adhesives
■Mates with LC adapters
(pages 34-35), LC
Transceivers
LC Connector Kits —
Short Boot Kits
Product Facts
■Ferrule Tip to End of Boot
Length: 42.5 mm
■27.45 mm adapter to end of
boot
■GR-326 small form factor
requirements
Performance (typical)
Insertion Loss — 0.2dB
Reflectance — -55dB
Operating Temperature —
-40° C to +75° C
Material
Ferrule — Zirconia
Housing — UL 94 V-O rated
thermoplastic
Length —
Ferrule Tip to End of Boot
900 µm Buffered — 31.5 mm
2.0 mm Jacketed — 52.0 mm
3.0 mm Jacketed — 51.0 mm
Description Fiber Type Housing Boot Used with Assembly Pack
Color Color Part Number
900 µm Buffered 2064937-1
Singlemode Blue Blue 1.6-2.0 mm Jacketed 2064937-2
Simplex 3.0 mm Jacketed 2064937-3
900 µm Buffered 2064938-1
Multimode Beige Beige 1.6-2.0 mm Jacketed 2064938-2
3.0 mm Jacketed 2064938-3
900 µm Buffered 2-2064937-1
Singlemode Blue Blue 1.6-2.0 mm Jacketed 2-2064937-2
Duplex 3.0 mm Jacketed 2-2064937-3
900 µm Buffered 2-2064938-1
Multimode Beige Beige 1.6-2.0 mm Jacketed 2-2064938-2
3.0 mm Jacketed 2-2064938-3
Description Fiber Type Housing Boot Used with Installation Pack
Color Color Part Number
Simplex Singlemode Blue Blue 1.6-2.0 mm Jacketed 1918407-1
Multimode Beige Beige 1.6-2.0 mm Jacketed 1918405-1
Duplex Singlemode Blue Blue 1.6-2.0 mm Jacketed 1918406-1
Multimode Beige Beige 1.6-2.0 mm Jacketed 1918404-1
27.45
[1.081] Ref.
41.00
[1.614] Max.
31
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LC Connector Kits (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
LC Connector Kits —
Tight Jacketed Kits
Product Facts
■Non pull-proof connector for
use with tight jacketed fiber
cable
■Allows jacket and buffer to
move together to prevent
micro-bends and fiber
breakage
■LC Commercial Item
Description (CID) interim
approval by Naval Surface
Warfare Center, Dahlgren
Division
■Tested using MIL-PRF-
85045/16 2.0 mm cable
LC Connector Kits —
Ultra Short LC
Product Facts
■Ferrule tip to end of boot
length 37.5 mm
■GR-326 small form factor
requirements
■Ideal for cabinets with
limited space
■Call for details about duplex
connectors
Applications
■In flight networks
■Shipboard applications
■Aero market
Material
Ferrule — Zirconia
Housing — UL 94 V-O rated
thermoplastic
Length — Ferrule Tip to End of
Boot: 52.0 mm
Engineering Report
502-1191
Description Fiber Type Housing Boot Used with Individual Pack Bulk Pack
Color Color Part Number Part Number
Singlemode Blue Blue 1.6-2.0 mm Jacketed 6828095-1 6828095-2
Simplex 2.4 mm Jacketed 1918228-1 1918228-2
Multimode Beige Beige 1.6-2.0 mm Jacketed 6828094-1 6828094-2
2.4 mm Jacketed 1918153-1 1918153-2
Duplex Singlemode Blue Blue 1.6-2.0 mm Jacketed 6828130-1 6828130-2
Multimode Beige Beige 1.6-2.0 mm Jacketed 6828129-1 6828129-2
Description Fiber Type Housing Boot Used with Installation Pack
Color Color Part Number
Simplex Singlemode Blue Blue 1.6-2.0 mm Jacketed 2064687-1
Short Bend
Limiting Boot
Connector
Subassembly
Termination
Cover
Short Crimp Eyelet/
Heat Shrink Assembly
37.50
[1.476] Max.
32
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LC Connector Components
Fiber Optic Products Catalog
50° Angled
Boot
50°
Angled
Boot
Right-
Angled
Boot
Short
Bend
Limiting
Boot
Bend
Limiting
Boot
Bend
Limiting
Boot
Short Bend
Limiting Boot
Crimp Eyelet/
Heat Shrink
Tube
Connector
Sub-Assembly
Duplex Clip
Max.
Protective
Cap
Right-Angled
Boot
46.5
[1.83]
41.0
[1.61]
52.0
[2.05]
58.5
[2.30]
Buffer
Boot
Short
Buffer
Boot
Connector
Sub-Assembly
Duplex Clip
Protective
Cap
Buffer
Boot
53.0
[2.09]
Short
Buffer
Boot
31.5
[1.24]
Straight
Boot
Crimp Eyelet
Connector
Sub-Assembly
Duplex Clip
Protective
Cap
Straight
Boot
49.5
[1.95]
Simplex Connector
Fiber Type Sub-Assembly & Duplex Clip Cable Size Crimp Eyelet with Boot Boot Part Number
Protective Cap Heat Shrink Tube Description (see chart page 33)
1.6-2.0 mm 1918918-2 Short Bend Limiting 1918403-x
Bend Limiting 1588153-x
Singlemode 1.6-2.0 mm 6374150-2 Right-Angled 1374737-x
(Blue Hsg.) 1828456-1 1754371-4 50 Degree Angled 6457543-x
Bend Limiting 1588153-x
2.4 mm 6588189-1 Right-Angled 1374737-x
50 Degree Angled 6457543-x
1.6-2.0 mm 1918918-1 Short Bend Limiting 1918403-x
Bend Limiting 1588153-x
Multimode 1.6-2.0 mm 6374150-1 Right-Angled 1374737-x
(Beige Hsg.) 1754625-1 1754371-5 50 Degree Angled 6457543-x
Bend Limiting 1588153-x
2.4 mm 6588189-1 Right-Angled 1374737-x
50 Degree Angled 6457543-x
LC Components —
1.6-2.4 mm Jacketed Cable
(Order One of Each
Component Excluding Clip
for Simplex, Two of Each
Plus One Clip for Duplex)
LC Components — 900 µm Buffered Fiber
(Order One of Each Component Excluding Clip for Simplex,
Two of Each Plus One Clip for Duplex)
Simplex Boot
Fiber Connector Duplex Boot Part Number
Type Sub-Assembly & Clip Description (see chart
Protective Cap page 33)
Singlemode 1828456-1 1754371-4 Buffer 1828184-x
(Blue Hsg.) Short Buffer 6588612-x
Multimode 1754625-1 1754371-5 Buffer 1828184-x
(Beige Hsg.) Short Buffer 6588612-x
LC Components — 3.0 mm Jacketed Cable
(Order One of Each Component Excluding Clip for Simplex,
Two of Each Plus One Clip for Duplex)
Simplex Boot
Fiber Connector Duplex Crimp Part Number
Type Sub-Assembly & Clip Eyelet (see chart
Protective Cap page 33)
Singlemode
(Blue Hsg.) 1828456-1 1754371-4 5504118-3 502716-x
Multimode
(Beige Hsg.) 1754625-1 1754371-5 5504118-3 502716-x
Instruction Sheet: 408-8675
Note: All part numbers are RoHS compliant.
33
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LC Connector Components (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS
compliant.
Connectors, Adapters,
Tooling & Accessories
2
LC Components —
1.6 to 2.4 mm Boots
Short Bend Limiting Boot for
1.6 to 2.0 mm Cable
Base Beige Blue Black
Part Number
1918403 -2 -1 —
Right-Angled Boot for
1.6 to 2.4 mm Cable
Base Beige Blue Black
Part Number
1374737 -2 -1 -3
30.50
[1.200]
Bend Limiting Boot for
1.6 to 2.4 mm Cable
Base Beige Blue Black
Part Number
1588153 -5 -2 -3
50 Degree Angle Boot for
1.6 to 2.4 mm Cable
Base Beige Blue Black
Part Number
6457543 -1 -2 -4
LC Components —
900 µm Boots
Buffer 900 µm Boot
Base Beige Blue Black
Part Number
1828184 -4 -1 -2
Short Buffer 900 µm Boot
Base Beige Blue Black
Part Number
6588612 -1 -2 -5
LC Components —
3.0 mm Boots
Straight Boot for 3.0 mm Cable
Base Beige Blue Black
Part Number
502716 -3 -4 -1
21.00
[.827]
37.00
[1.457]
25.14
[.990]
31.5
[1.240] 10.25
[.404]
30.00
[1.181]
34
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LC Adapters
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
LC Duplex Adapter for SC Cutout — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Beige 6457567-8
Flanged Black 2-6457567-1
Aqua 2-6457567-0
Metal Blue 1-6457567-3
Beige 6457567-7
Flangeless Black 1-6457567-9
Aqua 1-6457567-8
Beige 6457567-5
Black 1-6457567-7
Flanged Aqua 1-6457567-6
Blue 6457567-4
Ceramic Green 6457567-6
Beige 6457567-2
Black 1-6457567-5
Flangeless Aqua 1-6457567-4
Blue 6457567-1
Green 6457567-3
Shuttered LC Duplex Adapter for SC Cutout — Plastic
Alignment Shutter
Sleeve Description Housing Label Part
Material Color Color Number
Beige Beige 2064658-5
Black Beige 1-2064658-7
Flanged Aqua Aqua 1-2064658-6
Blue Blue 2064658-4
Ceramic Green Green 2064658-6
Beige Beige 2064752-2
Black Beige 1-2064752-3
Flangeless Aqua Aqua 1-2064752-4
Blue Blue 2064752-1
Green Green 2064752-3
Recommended Panel Cutout
Max. Panel Thk. 1.70 [.067]
18.00
[.709]
13.0–13.5
[.512–.531]
9.5–10.0
[.375–.393]
31.30
[1.232]
10.90
[.429] Ref.
LC Duplex Adapter for SC Cutout — Metal
Alignment
Sleeve Material Description Housing Color Part Number
Flanged 1754683-1
Flangeless 1754682-1
Flanged Electroless
Ceramic with Shutter Nickel 2064685-1
Flangeless
with EMI Shield 1754727-1
Recommended Panel Cutout
Max. Panel Thk. 1.70 [.067]
18.00
[.709]
13.0–13.5
[.512–.531]
9.5–10.0
[.375–.393]
35
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LC Adapters (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
Recommended Panel Cutout
Panel Thk. 1.2/1.7 [.047/.067]
Recommended Panel Cutout
Panel Thk. 1.2/1.7 [.047/.067]
LC Simplex Adapter — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Ceramic Simplex Beige 1457062-2
Adapter Blue 1457062-1
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
LC Quad Adapter — Plastic Flanged
Alignment Description Housing Part Numbers
Sleeve Material Color
Metal Flanged Beige 1695790-5
Ceramic Flanged Blue 1695790-4
Note: All part numbers are RoHS compliant.
LC Duplex Adapter for LC Cutout — Plastic
Alignment Description Housing Part Numbers
Sleeve Material Color
Duplex Sr-Jr Beige 1985150-4
Metal Blue 1985150-3
Duplex Sr-Sr Beige 1985149-4
Blue 1985149-3
Duplex Sr-Jr Beige 1985150-2
Ceramic Blue 1985150-1
Duplex Sr-Sr Beige 1985149-2
Blue 1985149-1
13.2–13.4
[.520–.527]
13.2–13.4
[.520–.527]
11.7–11.8
[.461–.465]
7.1–7.2
[.280–.283]
30.7 ± 0.10
[1.209 ± .004]
26.3–26.8
[1.035–1.055]
36
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
SC Connector Kits
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
SC Connector Kits —
Standard Kits
Product Facts
■Compliant with
■JIS C-5973
■Fibre Channel
■TIA FOCIS-3
■One-piece connector body
■Compatible with anaerobic
adhesives
■Instruction Sheet 408-8674
■Components packaged in 25
piece bags for easy access
■Field installable duplex clip
(6348522-1) available
■Mates with SC adapters
(pages 39-41), SC
Transceivers
Performance (typical)
Insertion Loss — 0.2dB
Reflectance — -55dB
Operating Temperature —
-40° C to +75° C
Material
Ferrule — Zirconia
Housing and Connector Body —
UL 94 V-O rated thermoplastic
Length —
Ferrule Tip to End of Boot
900 µm Buffered — 54 mm
2.0 mm Jacketed — 50 mm
3.0 mm Jacketed — 50 mm
SC Connector Kits —
Tight Jacketed Kits
Product Facts
■Non pull-proof connector for
use with tight jacketed fiber
cable
■Allows jacket and buffer to
move together to prevent
micro-bends and fiber
breakage
■SC Commercial Item
Description (CID) interim
approval by Naval Surface
Warfare Center, Dahlgren
Division
■Tested using MIL-PRF-
85045/16 2.0 mm cable
Applications
■In flight networks
■Shipboard applications
■Aero market
Material
Ferrule — Zirconia
Housing — UL 94 V-O rated
thermoplastic
Length — Ferrule Tip to End of
Boot: 57.0 mm
Engineering Report
502-1191
Description Fiber Type Housing Boot Used with Assembly Pack
Color Color Part Number
900 µm Buffered 2064939-1
Singlemode Blue Blue 2.0 mm Jacketed 2064939-2
Simplex 3.0 mm Jacketed 2064939-3
900 µm Buffered 2064940-1
Multimode Beige Beige 2.0 mm Jacketed 2064940-2
3.0 mm Jacketed 2064940-3
Singlemode Blue Blue 2.0 mm Jacketed 5504936-2
Duplex 3.0 mm Jacketed 5504655-2
Multimode Beige Beige 2.0 mm Jacketed 5504927-1
3.0 mm Jacketed 5504657-1
Description Fiber Type Housing Boot Used with Individual Pack Bulk Pack
Color Color Part Number Part Number
Singlemode Blue Blue 1.6-2.0 mm Jacketed 6828100-1 6828100-2
Simplex 2.4 mm Jacketed 1918227-1 1918227-2
Multimode Beige Beige 1.6-2.0 mm Jacketed 6828099-1 6828099-2
2.4 mm Jacketed 1918154-1 1918154-2
Duplex Singlemode Blue Blue 1.6-2.0 mm Jacketed 1828573-1 1828573-2
Multimode Beige Beige 1.6-2.0 mm Jacketed 1828574-1 1828574-2
37
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
SC Connector Components
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
SC Components —
Duplex Clip
SC Duplex Clip (Black)
Part Number 6348522-1
Use 2 pieces to create one
clip for duplexing simplex
housings
Straight
Boot
Bend
Limiting
Boot
Straight
Boot
Bend
Limiting
Boot
Angled
Boot
Crimp Eyelet
Connector
Sub-Assembly
Protective
Cap
50.0
[1.97]
51.0
[2.01]
Angled
Boot
58.0
[2.28]
Short
Buffer
Boot
Short
Buffer
Boot
Buffer
Boot
Connector
Sub-Assembly
Protective
Cap
54.0
[2.13]
31.0
[1.22]
Buffer
Boot
Simplex Connector
Fiber Type Sub-Assembly & Duplex Clip Cable Size Crimp Eyelet Boot Boot Part Number
Protective Cap Description (see chart page 38)
2.0 mm 503970-9 Straight 5503971-x
Singlemode 2.4 mm 503970-6 Straight 5503971-x
(Blue Outer Hsg.) 5492123-7 6348522-1 Straight 5503971-x
3.0 mm 503970-3 Bend Limiting 1588491-x
Angled 1278705-x
2.0 mm 503970-9 Straight 5503971-x
Multimode 2.4 mm 503970-6 Straight 5503971-x
(Beige Outer Hsg.) 5503948-7 6348522-1 Straight 5503971-x
3.0 mm 503970-3 Bend Limiting 1588491-x
Angled 1278705-x
SC Components —
2.0 – 3.0 mm Jacketed
Cable (Order One of Each
Component Excluding Clip
for Simplex, Two of Each
for Duplex)
SC Components — 900 µm Buffered Fiber
(Order One of Each Component Excluding Clip for Simplex,
Two of Each for Duplex)
Simplex Boot
Fiber Connector Duplex Boot Part Number
Type Sub-Assembly & Clip Description (see chart
Protective Cap page 38)
Singlemode 5492123-7 6348522-1 Short Buffer 6278309-x
(Blue Outer Hsg.)
Buffer 6457493-x
Multimode 5503948-7 6348522-1 Short Buffer 6278309-x
(Beige Outer Hsg.)
Buffer 6457493-x
38
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
SC Connector Components (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
SC Components —
2.0 to 3.0 mm Boots
SC Components —
900 µm Boots
Straight Boot for 2.0 to 3.0 mm Cable
Cable Size Beige Blue Black Red
2.0 mm 5503971-5 5503971-6 2-5503971-3 2-5503971-7
2.4 mm 5503971-3 5503971-4 1-5503971-2 1-5503971-3
3.0 mm 5503971-1 5503971-2 1-5503971-0 1-5503971-1
Bend Limiting Boot for 3.0 mm Cable
Base Beige Blue Black
Part Number
1588491 -5 -2 —
Angled Boot for 3.0 mm Cable
Base Beige Blue Black
Part Number
1278705 -2 -1 -3
Buffer 900 µm Boot
Base Beige Blue Black
Part Number
6457493 -9 -1 -3
Short Buffer 900 µm Boot
Base Beige Blue Black
Part Number
6278309 — -2 -1
29.50
[1.161]
35.56
[1.400]
37.00
[1.457]
33.76
[1.329] 10.35
[.407]
39
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
SC Adapters
Fiber Optic Products Catalog
Note: All part numbers are RoHS
compliant.
Connectors, Adapters,
Tooling & Accessories
2
SC to SC Adapters
SC Simplex Adapter — Plastic
SC Duplex Adapter — Plastic
SC Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278348-1
Ceramic Electroless Nickel 6278348-3
SC Duplex Adapter — Plastic
Alignment Sleeve Housing Part Numbers
Material/Application Color
Beige 5504640-1
Metal/MM only Black 5504640-4
Aqua 5504640-6
Beige 5502776-9
Metal Black 5502776-7
Aqua 2-5502776-5
Blue 5502776-8
Beige 1-5502776-2
Ceramic Black 1-5502776-0
Aqua 2-5502776-6
Blue 1-5502776-1
Ceramic/APC Green 2-5502776-3
Flangeless SC Simplex Adapter —
Plastic
SC Simplex Adapter — Metal
Flangeless SC Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278348-5
Ceramic Electroless Nickel 6278348-7
Flangeless SC Simplex Adapter —
Metal
SC Simplex Adapter — Plastic
Alignment Sleeve Housing Part Numbers
Material/Application Color
Beige 5504614-1
Metal/MM only Black 5504614-4
Aqua 5504614-3
Beige 5502632-9
Metal Black 5502632-7
Aqua 2-5502632-3
Blue 5502632-8
Beige 1-5502632-2
Ceramic Black 1-5502632-0
Aqua 2-5502632-4
Blue 1-5502632-1
Ceramic/APC Green 1828028-2
Flangeless SC Simplex Adapter — Plastic
Alignment Housing Part Numbers
Sleeve Material Color
Metal Black 5504632-1
Blue 5504632-3
Black 5504632-2
Ceramic Aqua 5504632-6
Blue 5504632-4
Green 5504632-5
18.00 ± 0.10
[.709 ± .004]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
18.00 ± 0.10
[.709 ± .004]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
30.70
[1.209]
26.10
[1.027]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
40
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
SC Adapters (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
SC to SC Adapters
(Continued)
SC Duplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278049-1
Ceramic Electroless Nickel 6278049-3
SC to ST Simplex Adapter — Plastic
Alignment Housing Part Numbers
Sleeve Material Color
Beige 5502780-3
Metal Black 5502780-1
Aqua 2-5502780-0
Blue 5502780-2
Beige 5502780-6
Ceramic Black 5502780-4
Aqua 2-5502780-1
Blue 5502780-5
SC to ST Simplex Adapter —
Plastic
SC Duplex Metal Adapter
w/ EMI Shielding
SC Duplex Adapter
SC to ST Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278350-1
Ceramic Electroless Nickel 6278350-3
SC to ST Simplex Adapter —
Metal
Shielded SC Duplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6374223-1
Ceramic Electroless Nickel 6374223-3
SC to ST Hybrid Adapters
30.70
[1.209]
26.10
[1.027]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067] For
SC Duplex Adapter — Metal and
Shielded SC Duplex Adapter —
Metal
18.00 ± 0.10
[.709 ± .004]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
18.00 ± 0.10
[.709 ± .004]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
Flangeless SC to ST Simplex Adapter — Plastic
Alignment Housing Part Numbers
Sleeve Material Color
Metal Black 5504634-1
Ceramic Black 5504634-2
Flangeless SC to ST Simplex
Adapter — Plastic
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
41
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
SC Adapters (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
SC to ST Hybrid Adapters
(Continued)
SC to ST Duplex Adapter —
Plastic
SC to ST Duplex Adapter — Plastic
Alignment Housing Part Numbers
Sleeve Material Color
Beige 5504663-4
Metal (MM Only) Black 5504663-6
Aqua 5504663-5
Beige 5503137-3
Metal Black 5503137-1
Aqua 2-5503137-1
Blue 5503137-2
Beige 5503137-6
Ceramic Black 5503137-4
Aqua 1-5503137-9
Blue 5503137-5
SC to ST Duplex Adapter — Metal
SC to ST Duplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278051-1
Ceramic Electroless Nickel 6278051-3
Flangeless SC to ST Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278350-5
Ceramic Electroless Nickel 6278350-7
Flangeless SC to ST Simplex
Adapter — Metal
Part Number 1693539-1 —
Blue Simplex SC
Part Number 1693539-2 —
Beige Simplex SC
Part Number 1693540-1 —
Blue Duplex SC
Part Number 1693540-2 —
Beige Duplex SC
Slide-on Retractable Cover
for SC Simplex or Duplex
Applications
These retractable doors slip
onto the end of existing
Tyco Electronics adapters
and can be mounted after
the adapter has already
been installed.
30.70
[1.209]
26.10
[1.027]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
42
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
ST Connector Kits
Fiber Optic Products Catalog
Note: All part numbers are RoHS
compliant.
Fiber Type Body Coupling Boot Color Used with Individual Pack
Nut Part Number
Yellow (900 µm) 900 µm Buffered 5503613-2
250 µm Buffered
Singlemode Nickel-plated Zinc 900 µm Buffered
Brass Yellow (3.0 mm) 250 µm Buffered 5502580-2
3.0 mm Cable
Polymer Polymer Black (3.0 mm) 900 µm Buffered 503571-1
3.0 mm Cable
Multimode Black (900 µm) 900 µm Buffered 5492458-1
Nickel-plated Zinc Black (3.0 mm) 3.0 mm Cable
Brass Black 900 µm Buffered 5502674-1
(Right-Angle) 3.0 mm Cable
Length —
Ferrule Tip to End of Boot
900 µm Buffered — 56.4 mm
3.0 mm Jacketed — 47.25 mm
3.0 mm Right-Angle — 58.0 mm
Instruction Sheet
408-9971
Fiber Type Body Coupling Boot Color Used with Individual Pack
Nut Part Number
Black (900 µm) 900 µm Buffered
Multimode Polymer Polymer Black (3.0 mm) 250 µm Buffered 5503415-1
3.0 mm Cable
ST Connector Kits —
Polymer Ferrule
Multimode Polymer Composite
Insertion Loss — 0.3dB
Operating Temperature —
-20° C to +75° C
Durability — 500 Cycles
Instruction Sheet
408-9971
Fiber Type Body Coupling Ferrule Boot Color Used with Part Number
Nut Designation
125 Black (Bend Limiting) 3.0 mm Cable 5504008-3
125 Black (Long) 4.3 mm Cable 5504008-4
Multimode Nickel-plated Zinc 140 Black (Bend Limiting) 3.0 mm Cable 5504008-7
Brass 231 Black (Bend Limiting) 3.0 mm Cable 1-5504008-4
240 Black (Bend Limiting) 3.0 mm Cable 1-5504008-3
280 Black (Bend Limiting) 3.0 mm Cable 4-5504008-6
ST Connector Kits —
Stainless Steel Ferrule
Multimode Stainless Steel
Insertion Loss — 0.3dB
Operating Temperature —
-30° C to +70° C
Durability — 500 Cycles
Instruction Sheet
408-4151
47.25
[1.860] Max.
56.40
[2.220] Max.
70.90
[2.791]
Long Boot
Max.
75.60
[2.976]
Bend Limiting Boot
Max.
ST Connector Kits —
Ceramic Ferrules
Singlemode Ceramic
Insertion Loss — 0.3dB
Reflectance — -40dB
Operating Temperature —
-20° C to +75° C
Durability — 200 Cycles
Multimode Ceramic
Insertion Loss — 0.3dB
Operating Temperature —
-20° C to +75° C
Durability — 500 Cycles
43
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
ST Connector Components
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
ST Components —
2.0 to 3.0 mm Boots
ST Coupling Receptacles
Straight Boot for 2.0 to 3.0 mm Cable
Cable Size Beige Blue Black
2.0 mm 503219-4 503219-5 503219-1
3.0 mm 501457-4 501457-5 501457-1
Bend Limiting Boot for 3.0 mm Cable
Base
Part Number Beige Blue Black
502128 -4 -7 -1
25.40
[1.000]
54.30
[2.138]
Right Angled Boot for 3.0 mm Cable
Base
Part Number Beige Blue Black
5502667 -3 -2 -1
Buffer 900 µm Boot
Base
Part Number Beige Blue Black
5503628 -19 -8 -1
37.70
[1.484]
33.80
[1.331]
Alignment
Sleeve Part
Material Number
Polymer
Composite 501381-1
(Multimode)
Metal
(Multimode) 504021-1
Ceramic
(Singlemode) 502750-1
Ø 9.68
[.381] Min.
7.88
[.310] Min.
Product Facts
■Designed to accept
multimode TO-18, TO-46
and TO-52 active devices
■Nickel plated, die cast zinc
■Mount to PCB or through
panel
■Includes positioning ring
Description Packaging Height Part Number
Standard height Single .410 5501474-1
Low profile Single .280 5502585-2
Low profile Single (100) .314 5504022-2
Low profile Bulk (50) .314 5504022-3
ST Active Device Mounts — Multimode
Suggested
Panel Cutout
44
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
FC Connector Kits
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Singlemode Ceramic
Insertion Loss — 0.2dB
Reflectance — -59dB
Durability — 200 Cycles
Length —
Ferrule Tip to End of Boot
900 µm buffered — 35.0 mm
2.0 mm jacketed — 51.0 mm
3.0 mm jacketed — 51.0 mm
Instruction Sheet
408-8674
FC Connector Kits — Standard Kits
Fiber Type Boot Color Used with Part Number
900 µm Buffered 6754264-2
Singlemode Blue 2.0 mm Jacketed 5504915-2
3.0 mm Jacketed 5504649-1
FC Connector Kits —
Ceramic Ferrules
FC Square Flange Adapter
FC 8 mm/9 mm Dia. Round
FC 8 mm Dia. Round (Double D)
FC Simplex 8 mm/9 mm Dia. Round (D-Hole) Adapter — Metal
Alignment Panel Keyway Part Numbers
Sleeve Material Cut-out Slot (Nom.)
Metal D-Hole Std. 5504407-1
(Copper) 2.33 mm
Ceramic D-Hole Std. 5504407-3
2.33 mm
Ceramic/APC D-Hole 2.05 mm 5504407-8
Type R
Ceramic/APC D-Hole Prec. 5504407-7
2.02 mm
FC Simplex 8 mm Dia. Round (Double D-Hole) Adapter — Metal
Alignment Panel Keyway Part Numbers
Sleeve Material Cut-out Slot (Nom.)
Metal Double Std. 5504013-1
D-Hole 2.33 mm
FC Simplex Square Flange Adapter — Metal
Alignment Panel Keyway Part Numbers
Sleeve Material Cut-out Slot (Nom.)
Metal Square Std. 5501506-2
Flange 2.33 mm
Ceramic Square Std. 5501506-1
Flange 2.33 mm
FC to FC Adapters
4.75
[.187]
Ø 9.53
[.375]
2 Plcs.
4.75
[.187] 2 Plcs.
Ø 1.85
[.073]
2 Plcs.
Recommended Panel Cutout
Max. Panel Thk. 1.70 [.067]
Ø 9.30/9.10
[.366/.358]
3.73/3.63
[.147/.143]
Standard
Slot
Recommended Panel Cutout
Max. Panel Thk. 1.65 [.065]
Ø 9.80
[.386]
8.00
[.315]
Recommended Panel Cutout
Max. Panel Thk. 1.65 [.065]
FC Adapters
45
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
FC Adapters (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
SC to FC Simplex Adapter —
Plastic
Flangeless SC to FC Simplex
Adapter — Metal
SC to FC Simplex Adapter — Plastic
Alignment Housing Part Numbers
Sleeve Material Color
Metal Black 5502781-1
Ceramic Black 5502781-4
Flangeless Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278349-5
Ceramic Electroless Nickel 6278349-7
SC to FC Duplex Adapter — Metal
SC to FC Duplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278050-1
Ceramic Electroless Nickel 6278050-3
FC to ST Simplex Adapter — Metal
Hybrid FC to ST Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 5503640-1
Ceramic Electroless Nickel 5503640-2
FC to ST Hybrid Adapters
FC to SC Hybrid Adapters
SC to FC Simplex Adapter — Metal
SC to FC Simplex Adapter — Metal
Alignment Housing Part Numbers
Sleeve Material Color
Metal Electroless Nickel 6278349-1
Ceramic Electroless Nickel 6278349-3
18.00 ± 0.10
[.709 ± .004]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
18.00 ± 0.10
[.709 ± .004]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
30.70
[1.209]
26.10
[1.027]
9.60
[.378]
13.10
[.516]
9.60
[.378]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
4.75
[.187]
Ø 9.53
[.375]
2 Plcs.
4.75
[.187] 2 Plcs.
Ø 1.85
[.073]
2 Plcs.
Recommended Panel Cutout
Max. Panel Thk. 1.70 [.067]
46
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
ESCON Connector Components
Fiber Optic Products Catalog
ESCON is a trademark of IBM
Corporation.
IBM is a trademark of International
Business Machine Corporation.
ESCON Connector Plug
Product Facts
■Multimode
■IBM Approved
■Simple field assembly
Performance Characteristics
Assembly Loss — 0.2 dB Typical
Durability — 200 cycles
Instruction Sheet
408-9808
http://www.tycoelectronics.com/documents
Description Part Number
125 µm Black
DUALAN Cable 5492181-1
DUALAN Cable 5492181-2*
* Bulk packed, 50 per package
Termination Kit: 503746-6.
Note: All part numbers are RoHS compliant.
FSMA Products — Multimode
Product Facts
■Industry compatible with
905 (FSMA-I) and 906
(FSMA-II) style connectors
■Terminates fiber sizes from
125 through 1000 microns in
diameter
■Design parameters conform
to NATO and IEC interface
standards
Adapter
Product Facts
■Precision mating adapter
for all FSMA connectors
■In-line splice or panel
mount design
Active Device Mount
Product Facts
■Designed to house TO-18,
TO-46, and TO-52 devices
■Constructed of nickel
plated die cast zinc alloy or
stainless steel
■Mounts to PC board or
through panel
FSMA Adapters
Description Part Number
Hex Flange, Stainless Steel 501049-1
Hex Flange, Stainless Steel, Counterbore, Sealed 501050-1
Fixed Flange, Nickel-Plated Brass 5504026-1
In-Line, Stainless Steel 504028-1
In-Line, Stainless Steel, Counterbore, Short 504031-1
FSMA Connectors
Ferrule Connector Fiber Nominal Jacket O.D.
Material Body Material Diameter 3.1 mm 4.3 mm
(µm) 905 906 905
125 5504566-1 5504014-1 5504567-1
140 5504566-2 1-5504014-0 5504567-2
Stainless Nickel-Plated 231 5504566-7 — —
Steel Brass 336 1-5504566-4 — —
1000 3-5504566-0 — —
1050 3-5504566-1 — 2-5504567-9
FSMA Active Device Mounts
Description Part Number
PC Mount Receptacle, Die Cast 5502136-1
PC Mount Receptacle, Die Cast, Bulk Packaged 5502136-2
PC Mount Receptacle, Stainless Steel 501055-1
Performance Characteristics
Insertion Loss — 1.3 dB Typical
Temperature Range —
-55° C to +105° C
Durability — 200 cycles
Length —
Ferrule Tip to End of Boot
Part Number 5504566 — 70 mm
Part Number 5504014 — 70 mm
Part Number 5504567 — 66 mm
Documentation
Product Specification
108-45106
Instruction Sheet
408-9863
FSMA 905 & 906
Test Report
501-359
http://www.tycoelectronics.com/documents
47
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Connectors, Adapters,
Tooling & Accessories
2
MTRJ Connectors
Note: All part numbers are RoHS
compliant.
MT-RJ Plugs
Product Facts
■Designed to meet TIA/EIA
568-B.3
■Each MT-RJ connector
houses two fibers
■Half the size of duplex SC
and ST Connectors
■Options available include:
■Multimode or singlemode
■Mini DUALAN or Mini
Zipcord cable
■With or without guide
pins
■MT-RJ SECURE Connector
Kits
Performance Characteristics
Insertion Loss — Typical (dB) 0.2 dB
Operating Temperature —
-10° C to 60° C
Durability — 500 Cycles
Instruction Sheet
408-4540
http://www.tycoelectronics.com/documents
Standard MT-RJ Connectors
Fiber Type Cable Type Pins Part Number
3.0 mm DUALAN Without Guide Pins 6278399-1
Singlemode 3.0 mm DUALAN With Guide Pins 6278399-2
1.8 mm Mini Zipcord Without Guide Pins 6278751-1
1.8 mm Mini Zipcord With Guide Pins 6278751-2
3.0 mm DUALAN Without Guide Pins 6278398-1
Multimode 3.0 mm DUALAN With Guide Pins 6278398-2
1.8 mm Mini Zipcord Without Guide Pins 6278750-1
1.8 mm Mini Zipcord With Guide Pins 6278750-2
MT-RJ to MT-RJ Adapter MT-RJ to MT-RJ Simplex Adapter MT-RJ to MT-RJ Duplex Adapter
MT-RJ SECURE Connectors
Fiber Type Cable Type Pins Color Part Number
Red 1918356-1
Yellow 1918356-2
Green 1918356-3
Blue 1918356-4
Multimode 1.8 mm Mini Zipcord Without Guide Pins Rose 1918356-5
Aqua 1918356-6
Brown 1918356-7
Violet 1918356-8
Orange 1918356-9
Slate 1-1918356-0
Simplex Part Number
1278017-1 (light almond)
Duplex Part Number
6374906-1 (Almond)
13.20 ± 0.30
[.520 ± 0.12]
9.70 ± 0.30
[.382 ± 0.12]
+ 0.04
– 0.00
+ .016
– .000
18.00
[.709 ]
Recommended Panel Cutout
Max. Panel Thk. 1.7 [.067]
30.70
[1.209]
26.40
[1.039]
9.90
[.390]
Recommended
Panel Cutout
48
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
LIGHTCRIMP PLUS No Epoxy, No Polish LC, SC and ST Connectors
Note: All part numbers are RoHS
compliant.
Product Facts
■Multimode connector kits
come with accessories
needed to terminate to
250 µm fiber, 900 µm
tight-buffered fiber, and
900 µm easy-strip
■SC and ST kits also
terminate 3 mm cables
■Singlemode connector kits
terminate to 250 µm fiber,
900 µm tight-buffered fiber,
900 µm easy-strip and
buffer tube splitter kits
■Easy installation:
■No epoxy, no polishing
■No bench tool required
■Strip, cleave and crimp
■Easy identification:
■Singlemode is blue
■Laser Optimized (10 Gig)
is aqua — 10 Gb/s
applications
■62.5/125 µm is beige
■50/125 µm is black
■Match fiber type of
cable to fiber type of
LIGHTCRIMP PLUS
Connector
■Mates with standard
couplers, adapters and
adapter plates
■Tested to and meets TIA/EIA
568-B.3
■Termination tool kits on
page 49
Performance Characteristics
Insertion Loss — Typical (dB)
0.2 dB Singlemode; 0.3 dB Multimode
Temperature Range —
-10° C to 60° C, tested to -40° C to 75°
C
Durability — 500 cycles
Simplex SC Connector Kits — LIGHTCRIMP PLUS No Epoxy, No Polish Connector
Fiber Type Housing Boot Used with Part Number
Color Color
Singlemode Digital APC Green Blue 900 µm & 250 µm Fibers 2064184-1
Singlemode Blue Blue 900 µm & 250 µm Fibers, 6693276-1
3 mm Cable
50/125 µm Multimode Beige Black 900 µm & 250 µm Fibers, 6278079-2
3 mm Cable
Laser Optimized (10 Gig)
(850 nm LO 50/125 µm) Beige Aqua 900 µm & 250 µm Fibers, 6588291-2
Multimode 3 mm Cable
62.5/125 µm Multimode Beige Beige 900 µm & 250 µm Fibers, 5492643-1
3 mm Cable
Duplex SC Clip Black — To convert Simplex kits for 6348522-1
(use 2) Duplex application
ST Connector Kits — LIGHTCRIMP PLUS No Epoxy, No Polish Connector
Fiber Type Housing Boot Used with Part Number
Color Color
50/125 µm Multimode Metallic Black 900 µm & 250 µm Fibers, 6278082-1
3 mm Cable
Laser Optimized (10 Gig)
(850 nm LO 50/125 µm) Metallilc Aqua 900 µm & 250 µm Fibers, 6278082-2
Multimode 3 mm Cable
62.5/125 µm Multimode Metallic Beige 900 µm & 250 µm Fibers, 5492642-2
3 mm Cable
Simplex LC Connector Kits — LIGHTCRIMP PLUS No Epoxy, No Polish Connector
Fiber Type Housing Boot Used with Part Number
Color Color
Singlemode Blue Blue 900 µm & 250 µm Fibers 6754482-1
50/125 µm Beige Black 900 µm & 250 µm Fibers 6754483-2
Multimode
Laser Optimized (10 Gig)
(850 nm LO 50/125 µm) Beige Aqua 900 µm & 250 µm Fibers 6754483-4
Multimode
62.5/125 µm Multimode Beige Beige 900 µm & 250 µm Fibers 6754483-1
Duplex LC Clip Black — To convert Simplex kits for 1754371-1
Duplex application
49
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
Tooling
Product Facts
■Includes all tools needed for
installing the listed type
LIGHTCRIMP PLUS no
epoxy/no polish connectors,
MT-RJ and MT-RJ SECURE
Jacks
■LIGHTCRIMP PLUS
Connector Termination
Video CD-Rom also
available separately,
Part Number 1374503-1
■Convenient carrying case
Description Part Number
Universal LIGHTCRIMP PLUS No epoxy/No polish Tool Kit (SC, LC, ST and MT-RJ Jack) 1278118-4 1278118-51
LIGHTCRIMP PLUS LC Connector Termination Tool Kit 1754845-1 1754845-21
LIGHTCRIMP PLUS SC Connector Termination Tool Kit 1278022-1 1278022-21
LIGHTCRIMP PLUS ST Connector Termination Tool Kit 492697-1 492697-21
1Includes Precision Cleaver and Microscope.
LIGHTCRIMP PLUS
Termination Tool Kits
LIGHTCRIMP PLUS
Cable Holders
Product Facts
■Used in LIGHTCRIMP PLUS
connector terminations
(included in
LIGHTCRIMP PLUS
Tool Kits)
A
B
C
Description Figure Part Number
ST A 492703-1
SC B 1278023-1
LC C 1754138-1
LC and SC — 2064540-1
LIGHTCRIMP Cleave Tool
Part Number 503705-1
Product Facts
■Used in both SC and ST
LIGHTCRIMP Connector
terminations
■Included in the Deluxe and
LIGHTCRIMP Tool Kits
50
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Tooling (Continued)
Hand Held Precision
Cleaver
Part Number 1871696-1
Product Facts
■Operator independent =
no craft sensitivity =
consistent cleave every time
■Hand held operation
■10,000 cleave blade life
■4, 6, 8, 10, and 18
millimeter cleave lengths
■Product specific markings
for LIGHTCRIMP PLUS and
MT-RJ jack connectors,
CORELINK splice, and
fusion splicing
■Cleaved surface angle < 1.5°
■No lip, no fracture, and
no roll-off
■Padded belt case for
convenience and storage
■Neck lanyard included
Tyco Electronics’ hand
held precision fiber cleaver
provides precision quality
cleaves with the feel and
robustness of a full scale
precision cleaver in a hand
held size at an exceptionally
competitive price. The
detailed scale markings
indicate proper cleave
lengths for popular
Tyco Electronics field
installable fiber optic
connectors and mechanical
splices in addition to the
standard numerical markings
for other applications
including fusion splicing.
The included belt pouch
and neck lanyard ensure
that the cleaver is always
within reach.
Applications
Affordable precision cleav-
ing solution for:
■Field installable mechani-
cal splice connectors
■Fusion splicing
■Mechanical splicing
■Bare fiber adapters
Product Dimensions
Length — 74 mm [2.913 in.]
Width — 65.5 mm [2.578 in.]
Thickness — 33.5 mm [1.318 in.]
Weight — 136 g [0.30 lb.]
51
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
Tooling (Continued)
Epoxy/Polish Connector
Termination Tool Kits
Product Facts
■Includes all tools necessary
to install the listed epoxy/
polish connectors
■For LC terminations, also
order Part Number
1754603-1
■Tool kits include:
■Pro-Crimper II Hand Tool
and crimping dies
■Polishing bushings
■Polishing film (also sold
separately)
■Cable and fiber strippers
■Scissors
■Scribe tool
■Includes polishing films to
install » 60 epoxy/polish
connectors
■Epoxy is sold separately
(see page 52)
■Does not include curing
oven or microscope
■Convenient carrying case
Description Part Number
SC and FC 503746-7
ST 503746-1
FSMA 503746-2
FSD 503746-6
Sapphire-Tipped Scribe
Tool and Accessories
Product Facts
■Long-lasting sapphire blade
■Pen-type casing
■Used to install all Epoxy/
Polish Connectors
■Included in Epoxy/Polish
Tool Kits
Description Part Number
Sapphire-tipped Scribe Tool 504064-1
Replacement Blades 504290-1
52
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Tooling (Continued)
TRA-CON Epoxies
Part Number 1918652-1
HYSOL Epoxy-Tubes
Part Number 502418-1
Product Facts
■For use with SC, LC, ST,
FSD, FC, and FSMA
Connectors
■Two-part epoxy in two tubes
■Heat-cured epoxy
■Terminates » 400
connectors
■One set of two (2) tubes per
part number
■Pot life = 30 minutes
■Cures in 30 minutes at
100° C
Product Facts
■For use with SC and LC
Connectors
■Pre-measured two-part
packets for consistent
results
■Long pot life once mixed
■Heat-cured epoxy
■Supplied in 4-gram packets
■Cures in 15 minutes at
115° C
EPO-TEK 353ND Epoxy
Part Number 504035-1
Description Part Number
LC Polishing Puck — Metal 1754074-1
LC Cable Preparation Template 1588756-1
LC Hand Tool and Die Set 1588176-1
LC 1.25 mm Ferrule Microscope Adapter 1278997-1
LC Oven Block Assembly 1457628-1
LC Adaptive Kit — Anaerobic Epoxy Style 1754603-1
LC Adaptive Kit — Heat Cure 1754462-1
Epoxy/Polish LC
Termination Accessories
Product Facts
■Supplement epoxy/polish
tool kits on page 51 with
these components to
terminate LC Epoxy/Polish
Connectors
■Different polishing films are
required for LC polishing
Product Facts
■For use with SC, LC, and
ST Connectors
■Pre-measured two-part
packets for consistent
results
■Can be heat-cured or cured
at ambient temperature
■Supplied in 2-gram packets
■Each packet terminates »
250 connectors
■25 packets per pack
■Pot life = 30 minutes
■Cures in:
■24 hours @ 25° C
■2 hours @ 65° C
■10 minutes @ 110° C
Epoxy Applicator Syringe
Part Number 501473-3
Product Facts
■3 cc capacity
EPO-TEK is a trademark of EPOXY
TECHNOLOGY INC.
HYSOL is a trademark of HENKEL
CORPORATION.
TRA-CON is a trademark of Tra-Con, Inc.
53
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
Tooling (Continued)
Hand Held Microscope
Product Facts
■High quality glass optics
■200X magnification
■Optimal visual examination
of terminated ends
■500 µm field of view
■Dual illumination
■Coaxial for inspecting
polish quality
■Oblique for general
conditions
■Pre-centered, threaded
adapter mount provides
easy focusing and changing
of connectors
■Field and laboratory
examination for multimode
and singlemode fibers
■Portable
■Integral infrared filter for
safety
■Do NOT use any
microscope to view active
fiber signals
■Disposable, Type LR44
batteries
■Long-life LED
(approximately 100,000
hours of operation)
■Each Kit includes:
■10-power objective
microscope with an
impact resistant
ergonomic rubber shell
and high quality glass
optics
■20-power eyepiece
■Padded carrying case
with an integrated belt
loop and internal adapter
storage pocket
■Neck lanyard with safety
breakaway feature
■Universal 2.5 mm ferrule
adapter (for SC, ST
and FC)
■Other adapters available
are:
■Universal 1.25 mm
(adapts LC and MU)
■MT-RJ
■MPO
■MPO APC
■LIGHTRAY MPX Connector
■LIGHTRAY MPX APC
Connector
Description Part Number
Hand Held Microscope 1754767-1
1.25 mm Universal LC and MU 1754765-1
2.5 mm Universal SC, ST and FC 1754766-1
SC APC 1828833-1
MT-RJ 1754768-1
Adapters MPO 1828836-1
MPO APC 1828837-1
LIGHTRAY MPX Connectors 1828834-1
LIGHTRAY MPX APC Connectors 1828835-1
FSMA 1985040-1*
* Coupling adapter Part Number 1985041-1 required.
DANGER: Active fibers should never be viewed through a microscope.
Tyco Electronics’ hand held
microscope incorporates
high quality glass optics
and dual illumination light-
ing for unsurpassed 200X
magnification. With a
500 µm Field of View (FOV)
and both coaxial and
oblique illuminations, this
microscope will meet the
proposed TIA/IEC hand held
microscope specification
for a polish quality scope
(coaxial) and general
conditions scope (oblique)
in one compact unit.
The built in IR-laser
attenuation filter will provide
protection from accidental
exposure to active fibers,
although intentional and
prolonged viewing of active
fibers is not recommended.
The ergonomic, impact
resistant shell provides
a rugged feel, and the
included padded belt case
and neck lanyard ensure
that the microscope is
always within reach.
Applications
Affordable inspection
device for:
■Polish inspection
■General conditions
(debris) inspection
■Cleave quality inspection
■Verifying core size
Product Dimensions
Length — 186.9 mm [7.359 in.]
Width — 51.6 mm [2.030 in.]
Height — 31.5 mm [1.240 in.]
Weight — 317.5 g [0.70 lb.]
54
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Tooling (Continued)
MTP/MPO IBC Cleaner
Part Number 1918809-1
Product Facts
■Cleans male or female
MTP/MPO connectors
■Pre-washed cleaning cloth
is lint and debris free
■Each cleaner is capable of
more than 400 cleanings
■Can be used for bulkhead
and unmated MTP/MPO
cleaning
■Protective dust cover
doubles as an adapter cap
for cleaning unmated
connectors
■FOCIS 5-Type MTP/MPO
interface compliant
■Removes dust and oil
contamination
■Ideal solution for cleaning
parallel optics transceivers
MTP is a trademark of US Conec Ltd.
The MTP/MPO IBC
(In Bulkhead Cleaner) dry
cloth cleaner offered by
Tyco Electronics utilizes a
densely woven micro-fiber
cloth that cleans male (with
pins) or female MTP/MPO
connectors while in adapters,
bulkheads, faceplates, or
in unmated form with the
unique adapter/dust cover.
The unique cleaning cloth
also reduces static charge
making it one of the most
advanced cleaning systems
available for bulkhead opti-
cal connector cleaning.
Applications
For effective cleaning of:
■Male and female
MTP/MPO connectors
inside mating adapters
■Unmated male and female
MTP/MPO connectors
using included adapter
■Parallel optics
transceivers
■Networking gear includ-
ing switches and routers
■Factory or field connectors
Product Dimensions
Length — 184.2 mm [7.25 in.]
Width — 56.5 mm [2.22 in.]
Thickness — 22 mm [0.866 in.]
Adapter Length — 19.5 mm [0.759 in.]
OPTIPOP R Reel Cleaner
Product Facts
■Static attraction is
minimized
■Ultra clean micro-fiber cloth
captures debris and other
contamination
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■High-end cost effective
cleaning solution
The OPTIPOP R dry cloth
cassette cleaners offered
by Tyco Electronics utilize a
densely woven micro-fiber
cloth that cleans fiber optic
connector tips while reduc-
ing static charge. This
makes them one of the most
advanced cleaning systems
available for optical connec-
tor cleaning.
Applications
A variety of reel cleaner
configurations allow for use
on the major optical con-
nector types including FC,
SC, ST, LC, MU, ODVA con-
forming, MT-RJ, and MPO.
Product Dimensions
Length — 127 mm [5.00 in.]
Width — 83 mm [3.26 in.]
Thickness — 48 mm [1.89 in.]
Weight — 150 g [0.33 lb.]
OPTIPOP is a trademark of
NTT Advanced Technology Corporation.
Description Part Number
MPO w/pins reel cleaner 1918802-1
One slot reel cleaner; 1.25 mm, 2.5 mm, MT No Pins 1918803-1
MT-RJ connector w/pins reel cleaner 1918804-1
Two slot reel cleaner; 1.25 mm and 2.5 mm 1918805-1
Reel cleaner refill (six per pack) 1918806-1
Reel Cleaner Refill (Six per Pack)
Part Number 1918806-1
55
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Connectors, Adapters,
Tooling & Accessories
2
Tooling (Continued)
OPTIPOP C Card Cleaner
Product Facts
■Static attraction is
minimized
■Ultra clean micro-fiber cloth
captures debris and other
contamination
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■Compact size The compact OPTIPOP C
dry cloth card cleaner
offered by Tyco Electronics
utilizes a densely woven
micro-fiber cloth that cleans
fiber optic connector tips
while reducing static charge.
This makes it one of the
most advanced cleaning
systems available for optical
connector cleaning.
Applications
The card cleaner can be
used on major optical
connector types including
FC compliant, SC, ST, LC,
MU, LC, ODVA, MT-RJ*,
and MPO*.
*Without guide pins installed.
Product Dimensions
Length — 120 mm [4.72 in.]
Width — 57 mm [2.24 in.]
Thickness — 16 mm [0.63 in.]
Weight — 60 g [0.13 lb.]
OPTIPOP is a trademark of
NTT Advanced Technology Corporation.
Description Part Number
Fiber connector card cleaner 1918810-1
Card cleaner refill (ten per pack) 1918811-1
Card Cleaner Refill (Ten per Pack)
Part Number 1918811-1
NEOCLEAN Stick Cleaner
Product Facts
■Perforated handle for
customizing length and
angle
■Ultra clean micro-fiber cloth
captures debris and other
contamination while
minimizing static attraction
■Robust cloth does not fray
or leave fibrous material
behind
■Reduces the number of field
and test issues caused by
contaminated end faces
■Convenient packaging
The NEOCLEAN dry cloth
stick cleaners offered by
Tyco Electronics utilize a
densely woven micro-fiber
cloth that cleans fiber optic
connector tips while reduc-
ing static charge. This
makes them one of the most
advanced cleaning systems
available for bulkhead opti-
cal connector cleaning.
Applications
The stick cleaners can be
used on major single fiber
optical connector types
inside bulkhead adapters
including FC compliant, SC,
ST, LC, MU, LC ODVA, and
MT-RJ Jacks in addition to
transceivers and lenses.
NEOCLEAN is a trademark of
NTT Advanced Technology Corporation.
2.5 mm
1.25 mm
Product Dimensions
Part Number 1918807-1
2.5 mm Stick Cleaner
Overall Length — 151.2 mm [5.95 in.]
Tip Diameter — 1.25 mm [0.049 in.]
Handle Diameter — 2.65 mm
[0.104 in.]
Tip Length — 12.6 mm [0.496 in.]
Part Number 1918808-1
1.25 mm Stick Cleaner
Overall Length — 151.2 mm [5.95 in.]
Tip Diameter — 2.5 mm [0.098 in.]
Handle Diameter — 2.65 mm
[0.104 in.]
Tip Length — 20.0 mm [0.787 in.]
56
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Tooling (Continued)
PRO-CRIMPER III Hand Tool
Part Number
Connector Cable Jacket Hand Tool Die Set
Diameter (mm) w/ Die Set Only
FSMA 3.0 58551-1 58552-1
(hex die)
ST Ceramic 3.0 58433-4 58424-1
ST Stainless Steel 3.0 58433-4 58424-1
ST Polymer Composite 3.0 58433-4 58424-1
ST Ceramic Used with Loose Tube 3.8 — 503890-1
ST Stainless Steel (504XXX series only) 3.0 58551-1 58552-1
SC/FC (Polymer crimp body) 3.0 503911-1 503910-1
2.4 & 3.0 492026-1 492025-1
SC/FC (Metal crimp body) 3.0 — 492131-1
LIGHTCRIMP Plus and LIGHTCRIMP ST 3.0 492623-1 492622-1
LIGHTCRIMP Plus and LIGHTCRIMP SC 3.0 492782-1 492783-1
LIGHTCRIMP Plus LC 1.6 – 2.0 1754137-1 1754136-1
MT-RJ SECURE Connector 1.8 1278632-1 1278627-1
LC 3.0, 2-4, 1.6-2.0 1588176-1 1588175-1
Polishing Bushing, Curing Sleeves and Strip Card Kits
Part Number
Connector Cable Jacket Polishing Curing Strip
Diameter (mm) Bushing Sleeves/Pieces Card Kit
FSMA 3.0 228025-1 502249-1 (12 pcs.) 501818-1
ST
Ceramic, Stainless Steel3.0 503337-1 (Metal) 502259-1 (12 pcs.) 501818-1
503304-1 (Black Polymer)
Polymer Composite 3.0 503304-2 (Beige Polymer) 502259-1 (12 pcs.) 501818-1
FC 3.0 504862-1 502862-2 (6 pcs.) 1754636-1
SC 3.0 502631-1 (Black Polymer) 502656-1 (1 pc.) 1754636-1
LC 1754074-1 (Metal) 1457630-X1(12 pcs.) 1588756-1
1-1 LC 900 µm
-2 LC jacketed cable
Hand Tools
PRO-CRIMPER III Hand Tool
Part Number 2064431-1
Instruction Sheet
408-4020
http://www.tycoelectronics.com/documents
57
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Table of Contents
Fiber Optic Products Catalog
Fiber Management & Capabilities
3
Section 3 — Fiber Management & Capabilities ............................................ 57-62
Fiber Management Systems ............................................................................................... 58
LIGHTRAY OFX Optical Fiber Circuit Assemblies .................................................................. 59
On Card Fiber Management ................................................................................................ 60
Enclosures and Customer Interface Panels .......................................................................... 61
Laser Process for Fibershape Products................................................................................ 62
58
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Management Systems
Fiber Optic Products Catalog
Tyco Electronics is recognized globally as a leader in Fiber Optics Interconnects. We also offer a complete line of integrated
Packaged Solutions to meet most complex design challenges. Working directly with us, our designers can offer solutions
that help reduce your time to market, simplify your manufacturing, and work with you so that your design requirements are
met. We offer complete solutions to a variety of fiber management challenges.
The products in this Fiber Management and Packaged Solutions section
are custom designed products, specific to our customers’ applications.
Please contact your local Tyco Electronics’ Sales Representative for
design assistance.
Fiber Enclosures Fiber Management
Trays/Modules
Optical Flex
Circuits
& Shuffles
Cable
Assemblies
Optical
Backplanes
59
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
LIGHTRAY OFX Optical Fiber Circuit Assemblies
Fiber Optic Products Catalog
Fiber Management & Capabilities
3
Tyco Electronics’
LIGHTRAY OFX optical
fiber circuit offers an
innovative and flexible
solution to precision fiber
management in high fiber
count applications.
Designed using the latest
fiber optic technology,
the LIGHTRAY OFX optical
circuit consists of a number
of optical fibers, which
are encapsulated in thin
protective film substrates.
As well as saving valuable
space in equipment and
equipment racks, the
LIGHTRAY OFX circuit also
provides optimum optical
performance.
Optical fiber “crossovers”
allow the optical fibers to be
routed in both regular and
irregular designs. Fibers are
routed on 250 µm center
lines allowing LIGHTRAY MPX
connectors to be terminated
on the fiber tails.
Optical Performance
(singlemode)
Maximum Insertion Loss*
(connector loss) — <0.1 dB max;
<0.05 dB typical
Polarization Depending Loss —
<0.1 dB
Mechanical Characteristics
Vibration (per IEC 61300-2-1) —
10-55Hz
Fiber Retention
(per IEC 61300-2-4) — 44 N max.
Environmental Characteristics
Operating Temperature —
-40°C to + 85°C
Storage Temperature —
-40°C to + 85°C
Humidity — 95%
* final loss depending on connector types
Product Facts
■Singlemode and multimode
product range
■Available in a range of
symmetrical and
asymmetrical designs
■Can be designed with a
choice of protective film
substrates (including V0
rated materials)
■Pre-terminated with
LIGHTRAY MPX Connector
or any other industry
standard connector
■Operates over a broad
temperature range
■Fiber optic equivalent of
a copper circuit
■Allows fiber “crossovers”
without performance
penalty
■Very low insertion loss
■Flat or cylindrical design
Benefits
■Easy routing and
management of
thousands of fibers
on a single substrate
■Fully optical cross connect
■Lightweight
■Saves valuable space
■Significantly contributes to
skew compensation
■Easy to install
■Offers flexibility in
systems design
Key Applications
High Fiber Count
Applications in Optical
Transmission and Switching
Equipment, in Equipment
Racks or on the Printed
Circuit Board.
■Provides a complete optical
backplane, interconnecting
multiple daughtercards
■Complex rack harnesses
■Simplified intra-rack fiber
management and cabling
■Serves as a complete optical
cross connect (64 x 64 or
128 x 128) in less than 500
x 500 mm of valuable space
■Can be used for the
interconnection of
optoelectronic devices on
the printed circuit board
60
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
On Card Fiber Management
Fiber Optic Products Catalog
AfterBefore
Product Facts
■Multimode or Singlemode
■Custom design
■94-V0 rated materials
Benefits
■Easy management of
on-board fibers
■Fiber protection and routing
(allowing use of 250 micron
fiber for added density)
■Pre-loaded and tested trays
to facilitate manufacturing
■“Mezzanine” trays allow
components to be mounted
underneath the fiber tray —
minimizing board real estate
■Splice management
■Maintaining minimum
bend radius
■Eliminating long term
performance degradation
through “sag”
■Skew control
Thin modules designed to fit on
your system card.
Plug and play — drop the module on your
board and plug the connectors.
Non-planar circuits
61
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Enclosures and Customer Interface Panels
Fiber Optic Products Catalog
Fiber Management & Capabilities
3
As customer interface panels and enclosures increase in fiber count and density, issues of fiber management,
repairability, and scalability become increasingly complex. We offer complete solutions matched to the
customers’ individual program needs:
■High density, ease of access, flexibility
■Pre-loaded and tested cables
■Modular design approach for flexibility in I/O’s needed, cable dress, and connector styles
■Accommodate airflow needs
■EMI Solutions
Fiber
Management
Features
Tray is
Preloaded
and Tested
MTP or MPX
SFF (LC, MU, MT-RJ)
Flexible Input
Cable Guide
Tool for
Disconnecting
Connectors That Are
Closely Spaced
Swing Out Trays for Ease of Access
• Pre-configured with Part Numbers
Assigned
• Modular — Customer can add or
change
Fiber Management
Flip Down Cover Has Schematic
Silkscreened Inside
Airflow Through
Enclosure
62
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Laser Process for Fibershape Products
Fiber Optic Products Catalog
Tyco Electronics laser process, which uses the power of a laser beam to
prepare fiber endfaces for termination in connector assemblies and optical devices,
provides a state-of-the-art solution for opto electronic device pigtailing including:
■Planar OEICs
■Array Devices
■Discrete Laser/LED/Receiver package
■Detachable pigtails
This ultra high precision process enables very compact designs and perpendicular
fiber coupling.
Fibershape Products by
Laser Processing
Product Facts
■Complete range of cleave
angles
■Ultra high precision
measured @ core region
(< ±0.5 degrees)
■Capable of providing domed
end finish
■Angle cleaving of ribbons
(incl. sawtooth)
■Angled cleaves in 0, 8,
45 and other custom
degrees
■Ultra precise length control
of cleaved endface versus
ref. plane
■Capable of cleaving close
to fiber coating
■High volume industrial
solution for the opto-
electronic industry
Please contact your local
sales representative or
Tyco Electronics for more
in-depth product information.
Near Field Scan @ 1310 nm Straight and Angled Cleave
Wedge Fiber Characteristics
Laser Processed Subassembly
90 Degree VCSEL Array Interface
63
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Table of Contents
Fiber Optic Products Catalog
Other Products and Capabilities
4
Section 4 — Other Products and Capabilities ............................................... 63-70
AMP NETCONNECT Premises Wiring Products...................................................................... 64
Telecom Outside Plant Products ......................................................................................... 65
Attenuators .................................................................................................................. 66-69
Switches ........................................................................................................................... 70
64
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
AMP NETCONNECT Premises Wiring Products
Fiber Optic Products Catalog
Premises Wiring Products
Optical Fiber Connectivity: LC SECURE Connectors,
MPO SECURE Connectors, and MT-RJ SECURE Connectors
No Epoxy, No Polish Terminations
(SC, LC, MT-RJ and ST)
25 Year System Warranty
AMPTRAC Connectivity
Management System
Complete Product Line for Fiber Networking
MPO High-Density Fiber Connectivity,
Cables and Cassettes
The AMP NETCONNECT
Business Unit of
Tyco Electronics offers a total
fiber optic solution including
fiber optic cable, connectiv-
ity and hardware; as well
as network management
through the new AMPTRAC
Connectivity Management
System. Please contact the
AMP NETCONNECT busi-
ness unit for more informa-
tion on product and system
warranties.
Additionally, the
AMP NETCONNECT
Business Unit offers a com-
plete line of copper net-
working products, including
shielded and unshielded
twisted pair cabling solu-
tions, cables, connectivity,
cable assemblies, patch
panels and faceplates.
For more information on
any Premises Wiring
products or systems, visit
www.ampnetconnect.com
or contact customer service
at 1-800-553-0938.
The AMP NETCONNECT full
line catalog (#82164) is also
available through customer
services or from your local
Tyco Electronics sales
representative.
™
65
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Telecom Outside Plant Products
Fiber Optic Products Catalog
Other Products and Capabilities
4
Telecom Outside Plant
Products
The Telecom Outside Plant Business
Unit of Tyco Electronics has been
created from a family of companies
with a long tradition of making quality
components for telecommunications
networks and providing innovative
solutions for their evolving needs.
The FIST, FOSC, and FibrBoss
families of modular fiber management
products enhance the design,
implementation, and maintenance of
fiberoptic networks, from the central
office/exchange to the customer’s
premises.
For more information on Telecom
Outside Plant products or services, visit
http://www.telecomosp.com or contact
customer service at 1-888-557-8901.
A full line Telecom Outside Plant Catalog
(#1654451) is also available through
customer services or your local
Tyco Electronics sales representative.
66
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Attenuators
Fiber Optic Products Catalog
Singlemode
Build Out Attenuators
Product Facts
■A range of fixed attenuation
values. Standard values of
1 through 20 and 25 dB
■LC, SC, FC, ST, and
D4 styles
■Attenuation is wavelength
independent and polarization
insensitive
■Low PDL
■Low modal noise
■Vibration resistant
■Dual Window and
Broadband Bandpass
■End face geometry per
GR-326
■Designed to comply with
Telcordia GR-910
Applications
■Power leveling in DWDM
transmission systems
■Test and Measurement
■Power attenuation at the
receiver
Available Collateral
■Test reports qualifying
product to Telcordia
GR-910 (2004)
■Application Specification
114-1129
■Installation/Cleaning
Instruction Sheet
408-8895
■Product Specification
108-2099
http://www.tycoelectronics.com/
documents
■Customer Drawings
Specifications
Attenuation Values —
1-20 dB and 25 dB (Fixed)
Reflectance —
≤-55 and -65 dB for UPC and APC
polish, respectively
Operating Temperature —
-40°C to +75°C
Vibration Resistance —
< 0.1 x attenuation
Customizable Features
■Attenuation tolerance
■Attenuation values in 1 dB
increments
■Labeling
■Kitting/Packaging
■Wavelength Dependent Loss
■Reflectance:
■ UPC to -55 dB max.
■ APC to -65 dB max.
67
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Attenuators (Continued)
Fiber Optic Products Catalog
Other Products and Capabilities
4
LC/UPC
Singlemode
LC Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 1693560-1
2 1693560-2
3 1693560-3
4 1693560-4
5 1693560-5
6 1693560-6
7 1693560-7
8 1693560-8
9 1693560-9
10 1-1693560-0
11 1-1693560-1
12 1-1693560-2
13 1-1693560-3
14 1-1693560-4
15 1-1693560-5
16 1-1693560-6
17 1-1693560-7
18 1-1693560-8
19 1-1693560-9
20 2-1693560-0
25 2-1693560-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance ≤-55 dB
Note: All part numbers are RoHS compliant.
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5209943-1
2 5209943-2
3 5209943-3
4 5209943-4
5 5209943-5
6 5209943-6
7 5209943-7
8 5209943-8
9 5209943-9
10 1-5209943-0
11 1-5209943-1
12 1-5209943-2
13 1-5209943-3
14 1-5209943-4
15 1-5209943-5
16 1-5209943-6
17 1-5209943-7
18 1-5209943-8
19 1-5209943-9
20 2-5209943-0
25 2-5209943-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max
Reflectance ≤-55 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5209250-1
2 5209250-2
3 5209250-3
4 5209250-4
5 5209250-5
6 5209250-6
7 5209250-7
8 5209250-8
9 5209250-9
10 1-5209250-0
11 1-5209250-1
12 1-5209250-2
13 1-5209250-3
14 1-5209250-4
15 1-5209250-5
16 1-5209250-6
17 1-5209250-7
18 1-5209250-8
19 1-5209250-9
20 2-5209250-0
25 2-5209250-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max.
Reflectance ≤-55 dB
SC/UPC
Singlemode
SC Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
28.6
[1.126]
6.25
[.246]
10.4
[.409]
Ø 1.25
[.049]
32.59
[1.283] Max.
9.53
[.375] Max.
7.4
[.291] Max.
68
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Attenuators (Continued)
Fiber Optic Products Catalog
FC/UPC
Singlemode
FC Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5209948-1
2 5209948-2
3 5209948-3
4 5209948-4
5 5209948-5
6 5209948-6
7 5209948-7
8 5209948-8
9 5209948-9
10 1-5209948-0
11 1-5209948-1
12 1-5209948-2
13 1-5209948-3
14 1-5209948-4
15 1-5209948-5
16 1-5209948-6
17 1-5209948-7
18 1-5209948-8
19 1-5209948-9
20 2-5209948-0
25 2-5209948-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance ≤-55 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5209285-1
2 5209285-2
3 5209285-3
4 5209285-4
5 5209285-5
6 5209285-6
7 5209285-7
8 5209285-8
9 5209285-9
10 1-5209285-0
11 1-5209285-1
12 1-5209285-2
13 1-5209285-3
14 1-5209285-4
15 1-5209285-5
16 1-5209285-6
17 1-5209285-7
18 1-5209285-8
19 1-5209285-9
20 2-5209285-0
25 2-5209285-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max.
Reflectance ≤-55 dB
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5209597-1
2 5209597-2
3 5209597-3
4 5209597-4
5 5209597-5
6 5209597-6
7 5209597-7
8 5209597-8
9 5209597-9
10 1-5209597-0
11 1-5209597-1
12 1-5209597-2
13 1-5209597-3
14 1-5209597-4
15 1-5209597-5
16 1-5209597-6
17 1-5209597-7
18 1-5209597-8
20 2-5209597-0
25 2-5209597-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance ≤-60 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5417021-1
2 5417021-2
3 5417021-3
4 5417021-4
5 5417021-5
6 5417021-6
7 5417021-7
8 5417021-8
9 5417021-9
10 1-5417021-0
11 1-5417021-1
12 1-5417021-2
13 1-5417021-3
14 1-5417021-4
15 1-5417021-5
16 1-5417021-6
17 1-5417021-7
18 1-5417021-8
19 1-5417021-9
20 2-5417021-0
25 2-5417021-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance ≤-65 dB
Note: Additional attenuation values
available upon request.
* 9° APC Available (Part Number 5417496-X)
Singlemode
SC Attenuators, Build Out
Style Fixed Value
SC/APC 8°
Note: All part numbers are RoHS compliant.
32.59
[1.283] Max.
9.53
[.375] Max.
7.4
[.291] Max.
24.6
[.97] Max.
9.9
[.39] Max.
28.7
[1.13] Max.
69
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Attenuators (Continued)
Fiber Optic Products Catalog
Other Products and Capabilities
4
Note: All part numbers are RoHS compliant.
D4/PC
Singlemode
D4 Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
5 5209570-5
10 1-5209570-0
15 1-5209570-5
20 2-5209570-0
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .15 x nominal
attenuation value
< 5 dB: ± 0.75 dB
Reflectance ≤-45 dB
ST/UPC
Singlemode
ST Attenuators, Build Out
Style, Fixed Value
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5417549-1
2 5417549-2
3 5417549-3
4 5417549-4
5 5417549-5
6 5417549-6
7 5417549-7
8 5417549-8
9 5417549-9
10 1-5417549-0
11 1-5417549-1
12 1-5417549-2
13 1-5417549-3
14 1-5417549-4
15 1-5417549-5
16 1-5417549-6
17 1-5417549-7
18 1-5417549-8
19 1-5417549-9
20 2-5417549-0
25 2-5417549-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .15 x nominal
attenuation value
< 5 dB: ± 0.75 dB
Reflectance ≤-55 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5417399-1
2 5417399-2
3 5417399-3
4 5417399-4
5 5417399-5
6 5417399-6
7 5417399-7
8 5417399-8
9 5417399-9
10 1-5417399-0
11 1-5417399-1
12 1-5417399-2
13 1-5417399-3
14 1-5417399-4
15 1-5417399-5
16 1-5417399-6
17 1-5417399-7
18 1-5417399-8
19 1-5417399-9
20 2-5417399-0
25 2-5417399-5
Note: Attenuation Tolerance, Ambient
≥ 5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max.
Reflectance ≤-55 dB
Ø 9.53
[.375]
Serial Number
Part Number
38.89
[1.531] Max.
29.34
[1.155] Max.
9.02 [.355] Ref.
M8 x 0.75 [.030]
27.3
[1.07] Max.
23.1
[.91] Max.
70
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Switches
Fiber Optic Products Catalog
Ruggedized Multimode
Switches
Refractive Plate Switch
2 x 2 Bypass Configuration
Part Number
6588871-1
Product Facts:
■No optical path interruption
@200 G’s for 8 ms
■Successfully passed
MIL-S-901D (Navy)
Heavyweight Shock Test
(Barge Test)
■Fiber type 62.5/125 µm
multimode
Specifications
Operating Temperature Range —
-30° to +85° C
Storage Temperature Range —
-40° to +85° C
Durability —
>1,000,000 cycles
Minimum Actuation Voltage —
4.75 V
Maximum Actuation Voltage —
5.25 V
Actuation Current at Typical —
5.0 V
Actuation Voltage —
100mA (maximum)
Tyco Electronics’ Ruggedized
Refractive Plate Switch is a
multimode optical switch that
is capable of withstanding a
200 G shock with a duration
of >8ms without interruption
of the signal path.
This switch is designed for
extreme environments that
require absolute product
quality on optical installations
and optical signal integrity.
71.6
[2.82]
31.8
[1.25]
2-56 UNC
4 Plcs.
Recommended Mounting Layout
Product Dimensions:
71.6
[2.82] Ref.
25.00
[.984] Min.
75.01
[2.953]Max.
2100.00
[82.677] 81.28
[3.200]
Min.
2000.00
[78.740] Min.
Ref.
Ø 2.77
[.109] 4 Plcs.
Accepts 2-56
Skt Hd Screw
31.8
[1.25]
18.42 ± 0.25
[.725 ± .010]
37.34
[1.470]
2 mm Low Smoke/Zero Halogen Jacket
4 Plcs.
900 µm Tubing
4 Plcs.
Fiber 3
Fiber 4
Fiber 2
Fiber 1
Pos. Feed Through Terminal
Neg. Feed Through Terminal
62.5/125/250 Fiber
4 Plcs.
Note: All part numbers are RoHS compliant.
71
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Table of Contents
Fiber Optic Products Catalog
Fiber to the Antenna
5
Section 5 — Fiber to the Antenna Rugged Interconnect ................................... 71-96
Introduction....................................................................................................................... 72
FULLAXS Fiber to the Antenna Rugged Interconnect............................................................. 73
ODC™ Plug and Socket Cable Assemblies ...................................................................... 74-78
Max-Travel Fiber to the Antenna Rugged Interconnect .......................................................... 79
LC ODVA Compliant Connectors .................................................................................... 80, 81
PRO BEAM Expanded Beam Rugged Optics Products....................................................... 82-96
ODC is a product and trademark of
HUBER+SUHNER AG.
72
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Fiber to the Antenna Rugged Interconnect
Next generation WiMax and
LTE Fiber to the antenna
designs require rugged
cable assemblies that plug
directly into transceivers
though a bulkhead.
It has to be a connector
design that can accommo-
date a large tolerance in
Z-direction. It has to allow
one handed mating (to
facilitate installation at the
antenna).
With a large Z axis tolerance,
they will accommodate the
broadest range of trans-
ceivers, so end customers
can pick the transceiver of
their choice.
Applications
■Base Stations
■Industrial
■Aerospace & Defense
73
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
FULLAXS Fiber to the Antenna Rugged Interconnect
Fiber Optic Products Catalog
Fiber to the Antenna
5
Product Facts
■Open bulkhead for easy
access to SFP
■Positive feedback to
operator when fully mated
■One-hand mating
■Duplex LC interface
■Bulkhead cutouts allow
for removal of transceiver
through the bulkhead
(no need to open RRH for
transceiver replacement)
■Robust bayonet locking for
easy, fast, and secure
mating
■Multimode and singlemode
■Water proof, dust proof and
corrosion resistant
■Expansion to RJ45, etc
■Plug has tolerance free
design, fully free floating in
Z-axis
■No Cable buckling at any
time during or after
installation
■Cost effective glass-filled
polymer or metal diecasted
bulkhead
■Field installable version
available
Specifications
Temperature — –40°C – +85°C
150 N Pull Force —
per IEC61300-2-4
Protection Class — IP67
Cycles — 50 Mating Cycles
Vibration — per GR3115 (3.26.3)
Salt Mist — per IEC 61300-2-26
Vibration — per IEC 61300-2-1
Shock — per IEC 61300-2-9
Impact — IEC 61300-2-12
Temperature / Humidity —
IEC 61300-2-22
Mechanical
Retention — 150 N cable retention
Rating — IP67 Rated
Interface — LC interface
Adapter Footprint — 36 mm x 36 mm
Locking Style — Bayonet style
Duplex LC Interconnect —
MM or SM
Tools — No tools required
Operating Temperature —
–40°C to +85°C
Mating Durability — min. 50 cycles
74
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
ODC™ Plug and Socket Cable Assemblies
Product Facts
■2 and 4 Channel
■Multimode — 2 & 4 Ch;
Singlemode — 2 Ch
■Compact design with 2 x or
4 x 1.25 mm ferrules
■Built-in socket available
with square or hexagonal
flange
■Water proof, dust proof and
corrosion resistant
■Screw lock mechanism
■Scoop proof
■One hand, blind-mating
possible
■Attached protection cap
■EMI shielded
■Low-Smoke, Zero-Halogen
(LSZH)
The ODC connectors,
together with the support
optical cable, are becoming
the standard interface spec-
ified in 3G, 4G and WiMax
Base Station remote radios
and Fiber-to-the-Antenna
applications.
The ODC cable assembly is
based on the N Type RF
Coax connector. The prod-
uct, however, is not limited
to the above applications.
As the ODC cable assem-
blies have passed tests like
salt mist, vibration and
shock and meets protection
class IP68, they are well
suited for Industrial and
Aerospace and Defense
applications.
Applications
■Base Stations
■Industrial
■Aerospace & Defense
Technical Documents
Protection Class
IP68
Salt Mist
IEC 61300-2-26: passed
Vibration
IEC 61300-2-1: passed
Shock
IEC 61300-2-9: passed
Optical
Insertion loss according to
IEC 61300-3-34
Multimode —
Typ. ≤ 0.25 dB
Max. ≤ 0.70 dB
Singlemode —
Typ. ≤ 0.30 dB
Max. ≤ 1.00 dB
Return Loss — Single mode ≥ 45 dB
Mechanical
Technology — Full ceramic ferrule
and sleeve
Mechanically Robust —
ODC plug ≤ 800 N tensile load
ODC socket ≤ 30 N tensile load
Installation Torque Force —
min. 1 Nm
max. 2 Nm.
Operating Temperature —
-40°C up to +85°C
Mating Durability —
min. 100 cycles
ODC is a product and trademark of
HUBER+SUHNER AG.
75
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Fiber to the Antenna
5
ODC™ Plug and Socket Cable Assemblies (Continued)
Interface Dimensions
Ø 8.2
[.32]
Ø 21.0
[.83]
43.9
[1.73]
SW19
2-Fiber ODC Plug
Ø 12.0
[.47]
Ø 21.0
[.83]
43.9
[1.73]
SW19
4-Fiber ODC Plug
ODC is a product and trademark of
HUBER+SUHNER AG.
76
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
ODC™ Plug and Socket Cable Assemblies (Continued)
Interface Dimensions
(Continued)
47.7
[1.88] 31.8
[1.25]
4.9
[.19]
Ø 15.85
[.624]
18.25
[.719]
18.25
[.719]
M3 Typ.
+ 0.3
– 0.0
+ .01
– .00
Ø 16.3
[.64 ]
18.25
[.719]
18.25
[.719]
Ø 3.5
[.14]
25.4
[1.00]
25.4
[1.00]
2-Fiber Small Square ODC Socket
SW25
SW30
Ø 34.0
[1.34]
47.7
[1.88]
28.0
[1.10]
From 2.8 to 4.0 [.11 to .16] (Panel Thickness)
19.4 ± 0.2
[.76 ± .01]
22.3 ± 0.2
[.88 ± .01]
2-Fiber Hexagonal ODC Socket
47.5
[1.87] 30.2
[1.19]
5.0
[.20]
Ø 15.85
[.624]
18.25
[.719]
18.25
[.719]
M3 Typ.
+ 0.3
– 0.0
+ .01
– .00
Ø 16.3
[.64 ]
18.25
[.719]
18.25
[.719]
Ø 3.5
[.14]
25.4
[1.00]
25.4
[1.00]
4-Fiber Small Square Socket
SW25
SW30
Ø 34.0
[1.34]
47.5
[1.87]
28.0
[1.10]
From 2.8 to 4.0 [.11 to .16] (Panel Thickness)
19.4 ± 0.2
[.76 ± .01]
22.3 ± 0.2
[.88 ± .01]
4-Fiber Hexagonal Socket
ODC is a product and trademark of
HUBER+SUHNER AG.
77
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Fiber to the Antenna
5
ODC™ Plug and Socket Cable Assemblies (Continued)
Cable Assembly Part Numbers
Base
Part Number1Description Fiber Size Available Sizes
1985834 2-Fiber Plug to LC Duplex Assembly Singlemode
1985835 2-Fiber Plug to LC Duplex Assembly Multimode (50/125)
1985836 2-Fiber Plug to LC Duplex Assembly Multimode (62.5/125) 1 to 99 meters 2
1985837 4-Fiber Plug to LC Duplex Assembly Multimode (50/125)
1985838 4-Fiber Plug to LC Duplex Assembly Multimode (62.5/125)
1985844 2-Fiber Plug to LC Duplex Assembly Singlemode
1985845 2-Fiber Plug to LC Duplex Assembly Multimode (50/125)
1985846 2-Fiber Plug to LC Duplex Assembly Multimode (62.5/125) 100 to 999 meters 3
1985847 4-Fiber Plug to LC Duplex Assembly Multimode (50/125)
19858484-Fiber Plug to LC Duplex Assembly Multimode (65.5/125)
1. For complete part numbers, obtain proper customer drawing.
2. The length is defined by the dash number (i.e.: 8-1985834-2 is 82 meters long, 1-1985834-5 is 15 meters long)
3. The length is defined by the dash number (i.e.: 8-1985844-2 is 820 meters long, 1-1985844-5 is 150 meters long)
Note: Other dust caps (screw type) and connector types, in combination with ODC Plug (or socket), are available upon
request.
Note: All part numbers are RoHS
compliant.
Product Dimensions
View X-X
ODC 2 Fiber Plug to LC
X
B
A
A
X
Note: All dimensions are reference dimensions.
Ø 8.2
[.32]
Ø 21.0
[.83]
43.9
[1.73]
SW19
Keyway
Pin 2 Pin 1
ODC Plug Outdoor IP68
ODC Protective Tubing
Color: Black
2.1 mm Diameter
ODC Ruggedized Field Cable
5.5 mm Diameter
2-Fiber Plug to
LC Duplex Assembly
View X-X
ODC 4 Fiber Plug to LC
XB
A
A
X
Note: All dimensions are reference dimensions.
Ø 12.0
[.47]
Ø 21.0
[.83]
43.9
[1.73]
SW19
Keyway
Pin 4 Pin 1
ODC Plug Outdoor IP68
ODC Protective Tubing
Color: Black
2.1 mm Diameter
ODC Ruggedized Field Cable
5.5 mm Diameter
Pin 3 Pin 2
4-Fiber Plug to
LC Duplex Assembly
Fiber Path
ODC LC
PlugConnector
Pin 1 A
Pin 2 B
Fiber Path
ODC LC
PlugConnector
Pin 1 1
Pin 2 2
Pin 33
Pin 4 4
ODC is a product and trademark of
HUBER+SUHNER AG.
78
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
ODC™ Plug and Socket Cable Assemblies (Continued)
Product Dimensions
(Continued)
Base
Part Number1Description Fiber Size Available Sizes
1985839 2-Fiber Socket to LC Duplex Assembly Singlemode
1985840 2-Fiber Socket to LC Duplex Assembly Multimode (50/125)
1985841 2-Fiber Socket to LC Duplex Assembly Multimode (62.5/125) 0.3 to 9.9 meters 2
1985842 4-Fiber Socket to LC Duplex Assembly Multimode (50/125)
19858434-Fiber Socket to LC Duplex Assembly Multimode (62.5/125)
1. For complete part numbers, obtain proper customer drawing.
2. The length is defined by the dash number (i.e.: 3-1985839-5 is 3.5 meters long, 1-1985839-6 is 1.6 meters long)
Note: Other dust caps (screw type) and connector types, in combination with ODC Plug (or socket), are available upon
request.
Note: All part numbers are RoHS compliant.
View X-X
ODC 2 Fiber Socket Small Square to LC
ODC Socket
IP68
Recommended Panel Cutout
X
B
A
A
X
Note: All dimensions are reference dimensions.
Simplex Cable
1.9 mm Diameter
Color: Orange if Multimode or
Yellow if Singlemode
4.9
[.19]
47.7
[1.88]
18.25
[.719]
18.25
[.719]
18.25
[.719] 18.25
[.719]
15.85
[.624]
25.4
[1.00]
3.5
[.14]
25.4
[1.00]
Keyway
Pin 2 Pin 1
+ 0.3
– 0.0
+ .01
– .00
Ø 16.3
[.64 ]
M3 Typ.
2-Fiber Socket to
LC Duplex Assembly
4-Fiber Socket to
LC Duplex Assembly
Fiber Path
ODC LC
Socket Connector
Pin 1 A
Pin 2 B
View X-X
ODC 4 Fiber Socket Small Square to LC
ODC Socket
IP68
Recommended Panel Cutout
XB
A
A
X
Note: All dimensions are reference dimensions.
Simplex Cable
1.9 mm Diameter
Color: Orange if Multimode or
Yellow if Singlemode
5.0
[.20]
47.5
[1.87]
18.25
[.719]
18.25
[.719]
18.25
[.719] 18.25
[.719]
15.85
[.624]
25.4
[1.00]
3.5
[.14]
25.4
[1.00]
Keyway
Pin 1
Pin 2
Pin 4
Pin 3
+ 0.3
– 0.0
+ .01
– .00
Ø 16.3
[.64 ]
M3 Typ.
Fiber Path
ODC LC
Socket Connector
Pin 1 2
Pin 2 1
Pin 34
Pin 4 3
ODC is a product and trademark of
HUBER+SUHNER AG.
79
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Fiber to the Antenna
5
Max-Travel Fiber to the Antenna Rugged Interconnect
Next generation WiMax and
LTE Fiber to the antenna
designs require rugged
cable assemblies that plug
directly into transceivers
though a bulkhead.
Max-Travel provides the
widest tolerance of trans-
ceiver lengths and position,
while allowing one handed
mating (to facilitate installa-
tion at the antenna).
With a Z axis tolerance of
6 mm, it will accommodate
the broadest range of trans-
ceivers, so end customers
can pick the transceiver of
their choice.
Product Facts
■Mates with 6 mm variation
in transceiver length
(6 mm Z Axis Travel)
■One-hand mating
■Duplex LC interface
■Bulkhead cutouts allow
for removal of transceiver
through the bulkhead
(no need to open RRH for
transceiver replacement)
■Robust bayonet locking for
easy, fast, and secure
mating
■Multimode and singlemode
■Water proof, dust proof and
corrosion resistant
Applications
■Base Stations
■Industrial
■Aerospace & Defense
Specifications
Temperature — –40°C – +85°C
400 N Pull Force —
per IEC61300-2-4
Protection Class — IP67
Cycles — 500 Mating Cycles
Vibration — per GR3115 (3.26.3)
Salt Mist — per IEC 61300-2-26
Vibration — per IEC 61300-2-1
Shock — per IEC 61300-2-9
Impact — IEC 61300-2-12
Temperature / Humidity —
IEC 61300-2-22
Mechanical
Retention — 400 N cable retention
Rating — IP67 Rated
Interface — LC interface
Adapter footprint — 36 mm x 37 mm
Locking Style — Bayonet style
Shell — Full metal shell for EMI
protection
Duplex LC interconnect —
MM or SM
Tools — No tools required
Operating Temperature —
–40°C to +85°C
Mating Durability — min. 100 cycles
6 mm Z Axis Travel
6 mm of Travel
Axial Float of LC Connectors = 6 mm
SFP Transceiver Placement
Tolerance = ± 3 mm
80
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
LC ODVA Compliant Connectors
Note: All part numbers are RoHS compliant.
Sealed Circular LC ODVA
Compliant Connector
Product Facts
■IP67 rated to ensure
protection from dust and
water immersion
■LC connector qualified to
Telcordia GR-326 and
TIA/EIA 568B.3
■Temperature range of
–40°C to 85°C
■Bayonet-style mechanical
lock
■Flame retardant materials
per UL 94 V-0
■Dual mounting bulkhead
design
■Singlemode and multimode
fiber
■Can be used with cable
types 9/125, 50/125 and
62.5/125
■LC to LC internal to the box
Jumpers
■LC connector accepts
tactical cable with 4.5 mm –
7.5 mm OD
■ODVA Compliant Plug to X
interface on tactical with
break out
■ODVA Compliant Plug to
Plug on tactical cable
■Build to customer need
Applications
The LC ODVA Compliant
Connector is ideal for:
■Harsh environments where
chemicals, corrosive gases
and liquids are
commonplace
■Inside and outside industrial
plant and equipment that
interface with industrial
Ethernet networks
■Remote interface
applications such as towers
and antennae as well as
FTTX in PON and at the
home applications
■Mobile routers and
internet hardware
Plug Part Numbers:
1828618-1 (Multimode)
1828618-2 (Singlemode)
Receptacle Part Numbers:
1828619-1 (Multimode)
1828619-2 (Singlemode)
Plug & Receptacle Cap
Part Numbers:
Plug Cap 1828740-1
Receptacle Cap 1918177-1
Ø 31.50
[1.240] 97.6
[3.84]
9.46
[.373]
21.00
[.827]
33.73
[1.328]
37.0
[1.45]
12.93
[.509]
2.00
[.079]
Gasket Panel
29.60
[1.165]
19.20
[.756]
Ø 28.50
[1.122]
Ø 34.0
[1.34]
ASSEMBLY CAPABILITIES
Tyco Electronics has extensive rugged optic harness capabilities.
Please consult your local Tyco Electronics Sales Representative for assistance.
Standard Cable Assemblies
Part Number Description
1828935-X LC ODVA Compliant Interface, 62.5, 2 Fiber
1828936-X LC ODVA Compliant Interface, Singlemode, 2 Fiber
Note: X = length in meters
Recommended Panel Cutout
Max. Panel Thickness 3.2 mm
81
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Fiber Optic Products Catalog
Fiber to the Antenna
5
LC ODVA Compliant Connectors (Continued)
Sealed Circular LC
Shielded EMI Connector
EMI Shielded Receptacle
Assembly
■Components are thin film
coated using a four-step
SS/Cu/Cu/SS vacuum
deposition process
■This coating results in an
approximate 99% shielding
effectiveness over uncoated
assemblies
Part Number 1985193-1
Note: All part numbers are RoHS compliant.
82
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products
Fiber Optic Products Catalog
Expanded Beam Technology
Expanded Beam Inserts
From left to right: PRO BEAM Sr.,
PRO BEAM Jr. & PRO BEAM Mini Expanded
Beam inserts.
Expanded Beam Principle
Expanded Beam Products
Product Facts
■PRO BEAM Sr., PRO BEAM
Jr. and PRO BEAM Mini
Connector field deployable
interconnects
■ARINC 600 connectors, with
inserts/holder blocks
designed for Mini Expanded
Beam — up to 128 channels
on size 3 ARINC 600
■MIL-C-38999 Series III
shell size 11 style circular
connectors — Cable
assemblies up to 4 fibers
■Unique Modular Design,
for use with multimode and
singlemode fiber
■Tactical cables, cable reels,
backpacks
■Cable assembly and
termination services
■Ball lens expands cross-
sectional area of light over
200 times for multimode
and over 2000 times for
singlemode
■Rugged hermaphroditic
construction (i.e., same
insert mates to each other)
■Physically non-contacting
mating conditions; no wear,
installed fiber ferrule
protected by ball lens
Fiber Optic Interconnect/
Cable System using
Expanded Beam technology,
which physically expands
and collimates the transmis-
sion signal into an optical
beam over 14 times its
original diameter (the cross
sectional area of the light
beam increases over 200
times for multimode optical
signals). For singlemode
signals, the collimated
beam is over 45 times its
original diameter (the cross-
sectional area of the light
beam increases over 2,000
times.). It is then refocused
back down onto the core of
the receiving fiber. This
approach provides ease
of alignment and low
sensitivity to thermal
changes and contamination.
High strength, precision con-
nector housings enhance
a durable connection,
optimizing low loss and
repeatable performance.
Suitable for aerospace,
avionics, field-deployable
communications, marine
ship-to-shore applications,
security systems, mobile
diagnostic units, oil and
gas exploration and other
harsh environment applica-
tions demanding strength,
durability and reliable
performance in conditions
of multiple coupling/
decouplings, blindmate
situations, and high vibration.
Product Facts
■No wear on fiber optic
interface; Very vibration
resistant
■Easy to handle, easy to
clean. Durable connection
that is highly resistant to
dirt/debris
■Singlemode or multimode
■Common 850/1300 Dual
Wavelength, 1310, or
1550 nm wavelengths
■Easy alignment for low-loss,
repeatable performance
■Consistent overall optical
“link budget” assured
■Low sensitivity to thermal
fluctuations and interface
contamination
■Repeatable low-loss
performance in harsh
environments
■PRO BEAM Sr. Insert —
the original, larger format,
Field Tactical, hermaphroditic
Connector System
■PRO BEAM Jr. Insert —
the second generation,
reduced size, Field Tactical
Connector System
■Mini Expanded Beam
Insert for multi-channel
small form factor — the
smallest expanded beam
multi-channel insert in the
industry, a Tyco Electronics
exclusive
ASSEMBLY CAPABILITIES
Tyco Electronics has extensive rugged optic harness capabilities.
Please consult your local Tyco Electronics Sales Representative for assistance.
83
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
46.0
[1.81]
14.0
[.55]
Ø 24.0
[.94]
Ø 27.0
[1.06]
Ø 37.0
[1.46]
Performance Specifications
Optical, Multimode Version
Insertion Loss, Typical —
0.7 dB @ 1300 nm*
Optical, Singlemode Version
Insertion Loss, Typical —
0.7 dB @ 1310 nm or 1500 nm*
Return Loss — > 34 dB @ 1310 nm
or 1550 nm**
*When tested with reference quality
launch/receive cable assemblies
**RL Tested Open Ended
Mechanical
Vibration, Sinusoidal —
10 - 500 Hz, 3 directions;
0.75 mm amplitude @ 10g acceleration
Bump — 4,000 Bumps, 6 directions
@ 50g acceleration
Free Fall — 500 falls on concrete;
Severity 1.2 m
Coupling Endurance —
3,000 couplings
Weight —
Plug — 123 grams, typical
D-Hole bulkhead — 102 grams, typical
Temperature
Operational Temperature —
-40°C/+85°C
Storage Temperature —
-55°C/+85°C
Temperature, Cyclic —
-55°C/+85°C
Humidity (Damp Heat) —95% RH
Immersion
Water — 15 m depth (plug) -
15 m (Bulkhead)
Material and Finish
Shell Alloy — Aluminum; or nickel
aluminum bronze (high saline environ-
ment)
Plating (For Aluminum Shells
Only) — clear hard anodized; or green
chromate conversion zinc (PRO BEAM
Jr. Bulkheads only)
Bulkhead Connector Panel
Thicknesses
PRO BEAM Jr. Bulkhead Connector
D-Hole — 4 mm max.
PRO BEAM Jr. Bulkhead Connector
Square Flange — 6 mm max.
PRO BEAM Jr. Connectors
PRO BEAM Jr. Square Flange Mount Bulkhead
PRO BEAM Jr. Cable Connector, Plug
160.0
[6.30]
105.0
[4.13] Ø 20.0
[.79]
53.5
[2.11]
31.0
[1.22]
Ø 24.0
[.94]
Ø 27.0
[1.06]
Ø 3.30
[.130] 4 Plcs. 4 Plcs.
30.0
[1.18] 2 Plcs.
30.0
[1.18] 2 Plcs.
30.0
[1.18]
2 Plcs.
37.6
[1.48] 2 Plcs.
Front View Panel Cutout
+ 0.10
– 0.00
+ .004
– .000
Ø 3.3
[.13 ]
+ 0.20
– 0.00
+ .008
– .000
Ø 29.0
[1.14 ]
PRO BEAM Jr. D-Hole Bulkhead, Standard Cable Adapter
43.0
[1.69]
40.0
[1.57]
1.00 – 4.00
[.039 – .157] Panel Thickness
Ø 24.0
[.94]
Ø 27.0
[1.06]
+ 0.20
– 0.00
+ .008
– .000
28.0
[1.10 ]
+ 0.20
– 0.00
+ .008
– .000
Ø 30.0
[1.18 ]
Recommended D-hole
Panel Cutout
PRO BEAM Jr. Low Profile D-Hole Bulkhead
44.0
[1.73]
16.0
[.63]
6.0
[.24]
Ø 24.0
[.94]
Ø 27.0
[1.06]
Ø 37.0
[1.46]
PRO BEAM Jr., Low Profile,
Square Flange Mount Bulkhead
84
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
PRO BEAM Jr. Connectors
(Continued)
Standard Bulkhead Cable Adapter, with Boot
80.0
[3.15]
Ø 37.0
[1.46]
Ø 20.0
[.79]
Environmentally Sealed Bulkhead Cable Adapter, with Boot
115.0
[4.53]
Ø 20.0
[.79]
PRO BEAM Jr. Replacement
Receptacles for TFOCA-II
Panel Mount Connector
Applications
(see page 85 for Part Numbers)
45.0
[1.77]
14.0
[.55]
29.08 – 28.96
[1.145 – 1.140]
Ø 24.0
[.94]
Ø 30.35 ± 0.13
[1.195 ± .005]
Recommended TFOCA-II®
Panel Cutout
Ø 27.0
[1.06]
Ø 37.0
[1.46]
45.0
[1.77]
14.0
[.55]
15.88
[.625]
15.88
[.625]
4.0
[.16]
Ø 24.0
[.94]
Ø 34.95
[1.376]
Min.
Ø 3.05
[.120] 4 Plcs.
Sq.
2 Plcs.
2 Plcs.
15.88
[.625] 2 Plcs.
Recommended TFOCA-II®
Panel Cutout
Ø 27.0
[1.06]
Ø 41.0
[1.61]
15.88
[.625] 2 Plcs.
PRO BEAM Jr. D-Hole Low Profile Buffered Fiber Bulkhead Replacement Connector for TFOCA-II Product
PRO BEAM Jr. Square Flange, Low Profile, Buffered Fiber Bulkhead Replacement for TFOCA-II Product
Panel Cutout Dimensions
TFOCA-II is a trademark of Amphenol
Fiber Systems International.
85
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
Technical Documents
Product Specification
108-2177 Design Objectives
Application Specification
114-13099
Instruction Sheets
408-8791 Grounding D-Hole
Bulkhead
408-8797 Plug
408-8798 Standard D-Hole Bulkhead
408-8811 Sealed D-Hole Bulkhead
408-8834 Low Profile Square Flange
Bulkhead
408-8840 Low Profile D-Hole
Bulkhead
408-8841 Standard Square Flange
Bulkhead
http://www.tycoelectronics.com/documents
PRO BEAM Jr. Connector Plug & Sealed Bulkhead Cable Adapter Kits
Cable Dia. (Max.) Part Number
3.10 1515814-1
.122
3.60 1515781-3
.142
4.10 1515848-2
.161
4.60 1516147-1
.181
5.10 1515834-2
.201
5.65 1515827-2
.222
6.10 1515859-3
.240
6.70 1588116-1
.264
7.50 (Breakout Cable Only) 1828168-1 (Plug)
.295
7.50 1754719-3(Sealed
.295 Bulkhead)
PRO BEAM Jr. Connector Standard Bulkhead Cable Adapter Kits*
Cable Dia. (Max.) Part Number
3.10 [.122] 1515791-2
3.60 [.142] 1515808-1
5.10 [.201] 1515835-2
5.65 [.222] 1515829-1
6.10 [.240] 1515796-2
4 x 3.00 [ 4 x .118] 1515749-1
*Standard Cable Adapter — Not applicable for Low Profile.
PRO BEAM Jr. Connector Shell Kits
Description Part Number
PRO BEAM Jr. Plug w/EPDM rubber 1754436-1
PRO BEAM Jr. Plug w/Fluorosilicone rubber 1754436-2
PRO BEAM Jr. D-Hole Low Profile, Buffered Fiber Bulkhead 1693741-1
PRO BEAM Jr. D-Hole Standard Bulkhead 1754437-1
PRO BEAM Jr. D-Hole Sealed Bulkhead 1754438-1
PRO BEAM Jr. Square Flange Low Profile Buffered Fiber Bulkhead 1754439-1
PRO BEAM Jr. Square Flange Standard Bulkhead 1754440-1
PRO BEAM Jr. Square Flange Sealed Bulkhead 1754441-1
PRO BEAM Jr. Replacement Receptacles for TFOCA-II Panel Mount Connector Applications
Description Part Number
PRO BEAM Jr. TFOCA-II Replacement D-Hole Low-Profile Buffered Fiber Bulkhead 1754445-1⽧
PRO BEAM Jr. TFOCA-II Replacement D-Hole Sealed Bulkhead 1754446-1⽧
PRO BEAM Jr. TFOCA-II Replacement Square Flange Low-Profile Buffered Fiber Bulkhead 1754447-1⽧
PRO BEAM Jr. TFOCA-II Replacement Square Flange Sealed Bulkhead 1754448-1⽧
PRO BEAM Jr. Insert Kits
Description Part Number
2 x 850 / 1300 nm Multimode 1515743-1
2 x 1310 nm Singlemode 1515739-1
2 x 1550 nm Singlemode 1516040-1
4 x 850 / 1300 nm Multimode 1515747-1
4 x 1310 nm Singlemode 1515740-1
4 x 1550 nm Singlemode 1516041-1
Ferrule Kits
Fiber Hole Size Mode PRO BEAM Connector Part Number
125 µm SM PRO BEAM Jr. 1588908-2
126 µm SM PRO BEAM Jr. 1588908-1
126 µm MM PRO BEAM Jr. 1588700-1
Connector Assembly
1 Shell Kit
1 Insert Kit
1 Cable Adapter Kit*
X Ferrule Kits (X = No.
of optical channels)
Part Numbers listed are
Shell alloy = aluminum
Plating = hard anodized.
Consult Tyco Electronics
for other plating/material
options such as NiAlBz for
Naval applications.
PRO BEAM Jr. Connectors
(Continued)
ASSEMBLY CAPABILITIES
Tyco Electronics has
extensive rugged optic
harness capabilities.
Please consult your local
Tyco Electronics Sales
Representative for
assistance.
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant.
86
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Protective Caps
Description PRO BEAM Part Number
Standard cap, for D-Hole Bulkhead PRO BEAM Jr. 1515868-1
Standard cap, for Flange Mount Bulkhead PRO BEAM Jr. 1515787-2
Standard cap, for connector plug PRO BEAM Jr. 1515867-1
Curing Fixtures
Connector Part Number
PRO BEAM Jr. Cable Plug (having cable with KEVLAR strength member fiber) 1693797-1
PRO BEAM Jr. Sealed D-Hole Bulkhead
PRO BEAM Jr. Standard D-Hole and Square Flange Bulkhead 1693800-1
PRO BEAM Jr. Low Profile Buffered Fiber Bulkhead 1754122-1
Instruction Sheet 408-8857. Available at www.tycoelectronics.com
Spare Parts & Tools
Ferrule Kits
Fiber Hole Size Mode PRO BEAM Part Number
125 µm SM PRO BEAM Jr. 1588908-2
126 µm SM PRO BEAM Jr. 1588908-1
126 µm MM PRO BEAM Jr. 1588700-1
Cable Crimp Components
Description Part Number
Crimp Sleeve (use with all PRO BEAM Jr. Connector Crimp Support sizes) 1515269-2
2.2 mm Crimp Support 1515567-1
3.1 mm Crimp Support 1515568-1
3.6 mm Crimp Support 1515569-1
3.8 mm Crimp Support 1515570-1
4.1 mm Crimp Support 2-1515270-0
4.6 mm Crimp Support 1516142-1
5.1 mm Crimp Support 1515571-1
5.65 mm Crimp Support 1515572-1
6.1 mm Crimp Support 1515573-1
6.5 mm Crimp Support 1515574-1
6.7 mm Crimp Support 1515575-1
Square Crimp Support for (4) 3 mm Cables1515632-1
PRO BEAM Jr. Connectors
(Continued)
Kevlar®is a trademark of E.I. du Pont de
Nemours and Company.
Technical Documents
Product Specifications
408-8857 Curing Fixtures for
PRO BEAM Jr. and
PRO BEAM Sr. Connectors
408-8828 Cleaning Procedure for
EB C/A's
Tooling Specifications
408-8795 Crimp Tool with Die Set for
PRO BEAM Jr. and
PRO BEAM Sr. Connectors
408-10022 Die Assembly for
PRO BEAM Mini and
PRO BEAM Jr. Circular
Crimps
http://www.tycoelectronics.com/documents
87
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant.
Ferrule Kits
Fiber Hole Size Mode PRO BEAM Connector Part Number
125 µm SM PRO BEAM Mini 1754700-1
126 µm SM PRO BEAM Mini 1754700-2
126 µm MM PRO BEAM Mini 1754699-1
PRO BEAM Mini Connectors
Tyco Electronics is pleased
to announce the natural
extension from our
PRO BEAM Sr. and
PRO BEAM Jr. Connector
product lines.
The PRO BEAM Mini
Connector saves space
and weight and is perfect
for high density applica-
tions. The product offers
the same durability as its
larger counterparts. PRO BEAM Sr., PRO BEAM Jr. &
PRO BEAM Mini Connectors
PRO BEAM Mini Plug Connector
PRO BEAM Mini Connector Shell Kits
Type Mount Attribute Part Number
Style Difference (HA Aluminum) (OD Aluminum) (NiAlBronze)
Plug EPDM Grip 1828698-1 N/A 1828698-2
D-Hole Low Profile - Buffered Fiber 1828699-1 1828699-2⽧1828699-3
Low Profile - 1.8 Jacketed 1985140-1 1985140-2 1985140-3
BulkheadSealed 1918185-1 * 1918185-2
Square Flange Low Profile - Buffered Fiber 1828826-1 * *
Neutrik Cutout-Drop-In 1918603-1 * *
* Contact Tyco Electronics for availability.
PRO BEAM Mini Cable Adapter Kits For Plug
Cable Diameter Part Number
5 mm 1828700-1
5.5 mm 1828700-2
6 mm 1828700-3
PRO BEAM Mini Insert Kits
Description Part Number
2 x 850 / 1300 nm Dual Multimode 1374759-4
2 x 1310 nm Singlemode 1588129-2
2 x 1550 nm Singlemode 1588128-2
4 x 850 / 1300 nm Dual Multimode 1374759-2
4 x 1310 nm Singlemode 1588129-3
4 x 1550 nm Singlemode 1588128-3
Connector Assembly
1 Shell Kit
1 Insert Kit
1 Cable Adapter Kit*
X Ferrule Kits (X = No.
of optical channels)
*Not applicable for Low Profile
ASSEMBLY CAPABILITIES
Tyco Electronics has extensive rugged optic harness capabilities.
Please consult your local Tyco Electronics Sales Representative for assistance.
88
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
PRO BEAM Mini Connectors
(Continued)
Performance Specifications
Optical, Multimode Version
Insertion Loss, Typical —
0.7 dB @ 1300 nm*
Optical, Singlemode Version
Insertion Loss, Typical —
0.8 dB @ 1310 nm*
Return Loss — > 34 dB @ 1310 nm
or 1550 nm**
*When tested with reference quality
launch/receive cable assemblies
**RL Tested Open Ended
Mechanical
Vibration, Sinusoidal —
10 - 500 Hz, 3 directions;
0.75 mm amplitude @ 10g acceleration
Bump — 4,000 Bumps, 3 directions
@ 40g acceleration
Free Fall — 500 falls on concrete;
Severity 1.2 m
Coupling Endurance —
3,000 couplings
Weight —
Plug — 50 grams, typical
D-Hole bulkhead — 39 grams, typical
Temperature
Operational Temperature —
-40°C/+85°C
Storage Temperature —
-55°C/+85°C
Temperature, Cyclic —
-55°C/+85°C
Humidity (Damp Heat) —95% RH
Immersion
Water — 5 m depth (plug) -
2 m (Bulkhead)
Pressure
Low Pressure — 25 kPa @ -55°C
Material and Finish
Shell Alloy — Aluminum; or nickel
aluminum bronze (high saline environ-
ment)
Plating (For Aluminum Shells
Only) — clear hard anodized; or green
chromate conversion zinc (PRO BEAM
Jr. Bulkheads only)
Technical Documents
408-10065 Plug
408-10067 Square Flange Bulkhead
408-10069 Low Profile D-Hole Bulkhead
408-10076 Sealed D-Hole Bulkhead
http://www.tycoelectronics.com/documents
PRO BEAM Mini Cable Connector, Plug
PRO BEAM Mini Low Profile, Square Flange Mount Bulkhead
PRO BEAM Mini Bulkhead with XLR Flange
PRO BEAM Mini D-Hole Bulkhead,
Buffered Fiber, Low Profile
Recommended Panel Cutout
Recommended Panel Cutout
Recommended Panel Cutout
89
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
PRO BEAM Mini Connectors
(Continued)
PRO BEAM Mini Low Profile,
Alternate Square Flange Mount Bulkhead
Recommended Panel Cutout
36.00
[1.417]
22.00
[.866]
19.00
[.748]
2 Plcs.
4 Plcs.
24.00
[.945]
2 Plcs.
3.00
[.118]
11.00
[.433]
31.00
[1.220]
Ø 18.00
[.709]
Ø 21.00
[.827]
+ 0.20
– 0.00
+ .008
– .000
Ø 19.00
[.748 ]
+ 0.10
– 0.00
+ .004
– .000
Ø 3.40
[.134 ]
Recommended Panel Cutout
Ø 31.00
[1.220]
Ø 16.00
[.630]
Ø 20.00
[.787]
+ 0.20
– 0.00
+ .008
– .000
Ø 24.00
[.945 ]
+ 0.20
– 0.00
+ .008
– .000
22.00
[.866 ]
Ø 21.00
[.827]
40.00
[1.575]
38.00
[1.496]
PRO BEAM Mini D-Hole Bulkhead,
Sealed Mil-Tactical Cable
90
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Performance Specifications
Optical, Multimode Version
Insertion Loss, Typical —
0.7 dB @ 1300 nm*
Optical, Singlemode Version
Insertion Loss, Typical —
0.7 dB @ 1310 nm*
Return Loss — > 34 dB
@ 1310 nm or 1550 nm**
*When tested with reference quality
launch/receive cable assemblies
**RL Tested Open Ended
Mechanical
Vibration, Sinusoidal —
10 - 500 Hz, 3 directions;
0.75 mm amplitude @ 10g acceleration
Bump — 4,000 Bumps, 6 directions,
@ 50g acceleration
Free Fall — 500 falls on concrete;
Severity 1.2 m
Coupling Endurance —
3,000 couplings
Weight —
Plug — 290 grams, typical
Chassis bulkhead — 150 grams, typical
Temperature
Operational Temperature —
-40°C/+85°C
Storage Temperature —
-55°C/+85°C
Temperature, Cyclic —
-55°C/+85°C
Humidity (Damp Heat) —95% RH
Immersion
Water — 5 m depth (plug),
2 m (Bulkhead)
Material and Finish
Shell Alloy — Aluminum; or nickel
aluminum bronze (high saline environ-
ment)
Plating (For Aluminum Shells
Only) — clear hard anodized
Bulkhead Connector Panel
Thicknesses
PRO BEAM Sr. D-Hole Connector —
6.5 mm max.
PRO BEAM Sr. Square Flange
Connector — 8.5 mm max.
Technical Documents
Product Specifications
408-8799 Plug
408-8800 D-Hole Bulkhead
408-8877 Square Flange Bulkhead
Application Specification
114-13122
http://www.tycoelectronics.com/documents
Front View
Cap Removed
Panel Cutout
PRO BEAM Sr. D-Hole Bulkhead with Standard Cable Adapter
PRO BEAM Sr. Connectors
PRO BEAM Sr. Cable Connector, Plug
Front View
Cap Removed
Panel Cutout
PRO BEAM Sr. Square Flange Mount Bulkhead with Standard Cable Adapter
Front View
Cap Removed
Please contact your local
Tyco Electronics
Sales Representative
for Part Numbers and
availability.
91
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
PRO BEAM Sr. Connector Plug Adapter Kits
Cable Dia. Part Number
(Max.)
5.10 1515940-1
.201
5.65 1515940-3
.222
6.20 1515940-5
.244
PRO BEAM Sr. Connector Standard Bulkhead Cable Adapter Kits
Cable Dia. Style Part Number
(Max.)
5.10 Standard Cable Adapter 1515847-1
.201
5.65 Standard Cable Adapter 1515724-2
.222
Buffered Low Profile Adapter 1515299-2
Fiber
PRO BEAM Sr. Connector Shell Kits Part Number
PRO BEAM Sr. Plug w/EPDM rubber 1754842-1
PRO BEAM Sr. D-Hole Standard Bulkhead 1754843-1
PRO BEAM Sr. Square Flange Standard Bulkhead 1754844-1
PRO BEAM Sr. Insert Kits Part Number
2 x 850 / 1300 nm Multimode 1693001-1
2 x 1310 nm Singlemode 1515734-2
4 x 850 / 1300 nm Multimode 1693001-2
4 x 1310 nm Singlemode 1515735-1
Connector Assembly
1 Shell Kit
1 Insert Kit
1 Cable Adapter Kit*
X Ferrule Kits (X = No.
of optical channels)
*Not applicable for Low Profile
Part numbers listed are
Shell alloy = aluminum
Plating = hard anodized.
Consult Tyco Electronics
for other plating/material
options such as NiAlBz for
Naval applications.
PRO BEAM Sr. Connectors
(Continued)
Ferrule Kits
Fiber Hole Size Mode PRO BEAM Connector Part Number
125 µm SM Sr. 1515941-1
126 µm SM Sr. 1515941-2
126 µm MM Sr. 1588801-1
Technical Documents
Product Specifications
408-8857 Curing Fixtures for
PRO BEAM Jr. and
PRO BEAM Sr. Connectors
408-8828 Cleaning Procedure for
EB C/A's
Tooling Specifications
408-8795 Crimp Tool with Die Set for
PRO BEAM Jr. and
PRO BEAM Sr. Connectors
408-10022 Die Assembly for
PRO BEAM Mini and
PRO BEAM Jr. Circular
Crimps
http://www.tycoelectronics.com/documents
Note: All part numbers are RoHS compliant.
ASSEMBLY CAPABILITIES
Tyco Electronics has extensive rugged optic harness capabilities.
Please consult your local Tyco Electronics Sales Representative for assistance.
92
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant.
Cable Reels
Reel Capacity (Random Lay)
Cable Diameter Notes/Description FlangePart Number
5.0 mm 5.5 mm Diameter
225 M 186 M
Reel & Reel Stand Combination
Reel can be detached 310 mm 1918930-1
from stand without tools
297 M 247 M Reel* 310 mm 1754515-1
570 M 462 M Reel* 370 mm 1754515-2
998 M 816 M Reel* 460 mm 1754515-3
1271 M 1052 M Reel* 510 mm 1754515-4
* See Accessories options below
Accessories
Description Reel Diameter Part Number
Backpack 370 mm Dia. Reel 1754516-1*
Backpack 460 mm Dia. Reel 1754516-2*
Backpack 510 mm Dia. Reel 1754516-3*
Static Frame 500 mm Dia. Max 1754517-1*
Static Frame 700 mm Dia. Max 1754517-2*
* Reel must be ordered separately.
Note: For lower cost alternative options. Please contact your local Tyco Electronics’ Sales Representative or
Tyco Electronics Product Information Center at 1-800-522-6752.
1918930-1
Tactical Reel/Drum Options
Reel with Stand
“Static Frame” Backpack Harness
Cable Assemblies
and Accessories
Product Facts
■Ruggedized cable
assemblies custom
tailored for field use in
harsh environments
■Heavy-duty light-weight
cable reel organizes and
protects connectors and
cable for easy pay-out and
safe storage
■Options for 500 meter reels
include special backpack
harnesses, a separate reel
stand, or a combination reel
and reel stand
Typical Reels and Reel Stands for Field-Deployable Cable Assemblies
Backpack with Reel
PRO BEAM Jr. Kits
PRO BEAM Jr.
Termination Kit
1828650-1
Cleaning Kit
1828335-2
Featured Cable Assemblies
TFOCA to PRO BEAM Jr. Plug
Cable Assembly
1828536-1⽧
LP D-Hole Bulkhead to 4 ST
62.5/125 on 1.8 mm cable
6828454-1⽧
Plug to Plug (100 meters)
6754475-2
TFOCA-II is a trademark of Amphenol
Fiber Systems International.
ASSEMBLY CAPABILITIES
Tyco Electronics has
extensive rugged optic
harness capabilities.
Please consult your local
Tyco Electronics Sales
Representative for
assistance.
93
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
Tactical Field
Splice Repair Kit
Part Number 1985212-1
Materials List
Quantity Description
4 Flexible Splice Housings
10 Mechanical Splices
1 Cleaver
1Cable Stripper
2 Buffer Stripper (sizes): 126 micron, 200 micron
1 Utility Knife with 3 Spare Blades
1 KEVLAR Shears
1 6 inch Metal Ruler, (units in metric)
1 Illuminated Microscope with Batteries
40 Alcohol (at least 70%) Pads
1 Wipes, 5 x 8 inch, 280 count box
1Plastic Frame Safety Glasses (ANSI approved lenses)
1 Tweezers
1 Roll Tape
1 Fine Tip Marking Pen
1 Set of Instructions (illustrated) — Waterproof
Portable Field Storage Case.
1 This case shall be ruggedized and house all components necessary to repair broken cable.
Dimensions of the case shall not exceed 7.5" H x 20" W x 14" — Black in color.
KEVLAR is a trademark of E. I. du Pont
de Nemours and Company.
Note: All part numbers are RoHS
compliant.
94
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS compliant.
Optical Test Set for Fiber
Optic Cables — Designed
for harsh environments
Product Facts
■Especially designed to
support the installation of
optical links in the field
■Able to test both cable
drums and entire links
■Powered by batteries with
high autonomy
■Suitable for diagnostics
and construction teams
■Easy to use, ergonomic,
rugged design
■Suitable for cable length
up to 10 km
■Supports up to 4 fibers per
cable with various types of
connectors
Power Meter
The optical power from any
source can easily be meas-
ured with the power meter
function.
Optical Source
A continuous optical signal
is generated and transmit-
ted with selectable output
power.
Drum Test / Cable Test
Test of an entire cable drum
with automatic good/bad
indication. The test of an
entire cable is realized with
a 2nd KPG-opt or a loop
connector.
Test Frames (optional)
The KPG-opt can generate
specific test frames as used
in optical networks and LOS
systems.
Diagnostic Features
Optical Tester
Description Part Number
850 nm 38999 III Size 11 Optical Test Kit 1918016-1
850/1300 nm PRO BEAM Jr. Optical Test Kit 1918016-2
1310 nm PRO BEAM Jr. Optical Test Kit 1985006-1
For additional wavelength testers, contact your local Tyco Electronics Sales
Representative.
Protective Case
1918082-1
95
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Fiber to the Antenna
5
Technical Data
Mil-Standard Distribution
Cable — 2 Fiber Singlemode
Attenuation — ≤ 0.5 dB/km @
1310 nm / ≤ 0.5 dB/km @ 1550 nm
Diameter — 5.8 mm
Weight — 25 kg/km
Minimum Bending Radius — 29 mm
Crush Resistance — 2000 N/cm
Operating Temperature —
-55° C to +85° C
Mil-Standard Distribution
Cable — 4 Fiber Singlemode
Attenuation — ≤ 0.5 dB/km @
1310 nm / ≤ 0.5 dB/km @ 1550 nm
Diameter — 5.8 mm
Weight — 27 kg/km
Minimum Bending Radius — 28 mm
Crush Resistance — 2000 N/cm
Operating Temperature —
-55° C to +85° C
Mil-Standard Distribution
Cable — 2 Fiber Multimode
Fiber Type — 50 µm/125 µm and
62.5/125
Attenuation — ≤ 3.5 dB/km @ 850 nm /
≤ 1.0 dB/km @ 1300 (62.5/125);
≤ 3.5 dB/km @ 850 nm / ≤ 1.5 dB/km @
1300 (50/125)
Mil-Standard Distribution
Cable — 4 Fiber Multimode
Fiber Type — 50 µm/125 µm and
62.5/125
Attenuation — ≤ 3.5 dB/km @ 850 nm /
≤ 1.0 dB/km @ 1300 (62.5/125);
≤ 3.5 dB/km @ 850 nm / ≤ 1.5 dB/km @
1300 (80/125)
Other fibers (i.e. Polyimide,
Silicon buffer, Carbon
coated, radiation hardened,
etc.) are available upon
request.
Contact Tyco Electronics or
your local Tyco Electronics
Sales Representative for
part numbers, pricing, and
availability.
ARMOR-LIGHT Tactical
Field Deployable Fiber
Optic Cable for Extreme
Environments (Metallic for
Rodent Proof)
Non-Metallic Tactical Field Deployable Fiber Optic Cable
4-Color Optical Fiber Cable Specification for Armored Cable for Ruggedized Applications
Construction:
■4-color coded fibers
■Fiber types 50/125/250 µm,
62.5/125/250 µm and 9/125/250 µm
■Stainless steel gel filled tube
■Stainless steel wire
■Jacket — Nylon, black
Gel Filled
Stainless
Steel Tube
PA Jacket
Stainless
Steel Wires
Primary
Coated Fiber
2-Color Optical Fiber Cable Specification for Armored Cable for Ruggedized Applications
Construction:
■2-color coded fibers
■Fiber types 50/125/250 µm,
62.5/125/250 µm and 9/125/250 µm
■Stainless steel gel filled tube
■Stainless steel wire
■Jacket — Nylon, black
Gel Filled
Stainless
Steel Tube
PA Jacket
Stainless
Steel Wires
Primary
Coated Fiber
Product Facts
■All terrain field deployable
cable, up to 4 fibers,
singlemode or multimode
■Developed for deployment
under the most demanding
conditions
■Tight buffered fibers are
protected by Aramid yarns
and a tough ruggedized
polyurethane sheath
■Tested in accordance with
MIL-PRF-85045
■Flexible, water resistant,
high crush resistant, and
lightweight,
■Designs available to be
resilient against radiation
exposure
Fiber Part Outside Weight Max. Attenuation dB/km
Bandwidth MHz-km
Type Number Dia. (mm) kg/km 850 nm 1300 nm 1310 nm 1550 nm 850 nm 1300 nm
62.5/125 1588957-1 3.824 3.5 1.0 X X 160 500
50/125 1588957-2 3.824 2.7 0.9 X X 400 1200
SM 1588957-4 3.824 X X 0.40 0.25 X X
Notes: 35 mm recommended bend radius.
3.1 kN breaking strength.
Fiber Part Outside Weight Max. Attenuation dB/km
Bandwidth MHz-km
Type Number Dia. (mm) kg/km 850 nm 1300 nm 1310 nm 1550 nm 850 nm 1300 nm
62.5/125 1693808-1 3.824 3.5 1.0 X X 160 500
50/125 1693808-2 3.824 2.7 0.9 X X 400 1200
SM 1693808-4 3.824 X X 0.40 0.25 X X
Notes: 35 mm recommended bend radius.
3.1 kN breaking strength.
Note: All part numbers are RoHS compliant.
96
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
PRO BEAM Expanded Beam Rugged Optics Products (Continued)
Fiber Optic Products Catalog
Note: All part numbers are RoHS
compliant.
Combination
LIGHTCRIMP PLUS
SC/ST/LC Termination Kit
Part Number 1985162-1
Product Dimensions
Length — 18.5 cm [7.283 in]
Width — 2.2 cm [0.866 in]
Thickness — 2.2 cm [0.866 in]
Weight (w/battery) — 150 g [0.33 lb]
Hand Held Visual Fault
Locator (VFL)
Product Facts
■650 nm (visible) Class 2
1.0 mW max Diode Laser
■Continuous and flashing
(2-3 Hz pulsed) modes
■Rugged rubber shell and
body design modeled after a
popular military connector
■Lanyard attached dust cover
■Standard 2.5 mm adapter for
SC, ST, and FC connectors
■Optional 1.25 mm adapter
for LC and MU connectors.
■Unique design allows
adapter to permanently
reside on VFL so it is not
misplaced allowing user to
choose 1.25 mm or 2.5 mm
■Uses 1 “AA” style battery
for >30 hours of continuous
use
■Soft-sided belt case for
convenience and storage
Description Part Number
Hand Held Visual Fault Locator 1828352-1
1.25 mm Adapter for Hand Held VFL 1828353-1
Includes Part Numbers 1828352-1 and 1828353-1 1828352-2
The Tyco Electronics Hand
Held Visual Fault Locator
(VFL) is a rugged and
affordable solution for identi-
fying breaks and bending
in optical fibers and cabling.
Its powerful, red (650 nm)
laser provides the ability to
locate damaged, broken, or
tightly bent fibers that cause
undesirable attenuation in
your system.
The jacket of the cable will
glow red at the location of
the fault. The flash button
allows the user to toggle
between continuous or
pulsed mode. The compact,
rugged, and balanced
design is based upon a
popular harsh environment
fiber optic connector. The
single “AA” style battery is
good for >30 hours of con-
tinuous use and the soft-
sided protective case with
belt loop provides a con-
venient and protective
means of storage.
Applications
Affordable VFL Solution for:
■Identifying breaks, bends,
and other damage in
optical fibers
■Tracing fiber paths
■Identifying termination
errors
■Continuity testing
492234 19
492305 19
492739 19
501049 46
501050 46
501055 46
501381 43
501457 43
502128 43
502716 32, 33
502750 43
503219 43
503571 42
503970 37
504021 43
504028 46
504031 46
1278017 47
1278391 21
1278530 20
1278705 37, 38
1374490 20
1374491 20
1374737 32, 33
1374759 87
1457062 35
1515299 91
1515724 91
1515734 91
1515735 91
1515739 85
1515740 85
1515743 85
1515747 85
1515749 85
1515781 85
1515791 85
1515796 85
1515808 85
1515814 85
1515827 85
1515829 85
1515834 85
1515835 85
1515847 91
1515848 85
1515859 85
1515940 91
1515941 91
1516040 85
1516041 85
1516147 85
1588116 85
1588128 87
1588129 87
1588153 32, 33
1588172 16
1588491 37, 38
Part No. Page
1588700 85
1588801 91
1588908 85
1588957 95
1693001 91
1693539 41
1693540 41
1693560 67
1693741 85
1693808 95
1695790 13, 35
1754371 32, 48
1754436 85
1754437 85
1754438 85
1754439 85
1754440 85
1754441 85
1754445 85
1754446 85
1754447 85
1754448 85
1754625 32
1754682 34
1754683 34
1754699 87
1754700 87
1754719 85
1754727 34
1754842 91
1754843 91
1754844 91
1828028 39
1828168 85
1828184 32, 33
1828456 32
1828536 92
1828573 36
1828574 36
1828618 80
1828619 80
1828698 87
1828699 87
1828700 87
1828740 80
1828826 87
1828935 80
1828936 80
1918153 31
1918154 36
1918177 80
1918185 87
1918227 36
1918228 31
1918356 47
1918403 32, 33
1918404 30
1918405 30
1918406 30
1918407 30
1918603 87
1918918 32
Part No. Page
1919166 17
1938208 14
1938209 14
1938323 12, 14
1938324 12, 14
1985140 87
1985149 35
1985150 35
1985193 81
1985834 77
1985835 77
1985836 77
1985837 77
1985838 77
1985839 78
1985840 78
1985841 78
1985842 78
1985843 78
1985844 77
1985845 77
1985846 77
1985847 77
1985848 77
2064184 48
2064658 13, 34
2064685 34
2064687 31
2064752 13, 34
2064778 10
2064779 10
2064781 10
2064782 10
2064792 16
2064812 10
2064813 10
2064814 10
2064815 10
2064843 27
2064844 27
2064845 27
2064846 27
2064847 27
2064848 27
2064849 27
2064850 27
2064851 27
2064852 27
2064853 27
2064854 27
2064856 27
2064858 27
2064859 27
2064860 27
2064861 27
2064862 12, 27
2064863 12, 27
2064865 27
2064866 27
2064867 27
2064868 27
2064869 27
Part No. Page
2064870 27
2064871 27
2064872 27
2064873 27
2064874 27
2064877 12
2064880 12
2064883 12
2064886 12
2064889 12
2064937 30
2064938 13, 30
2064939 13, 36
2064940 36
5209250 67
5209285 68
5209570 69
5209597 68
5209943 67
5209948 68
5417021 68
5417399 69
5417549 69
5492123 37
5492181 46
5492221 16
5492458 42
5492515 24
5492642 48
5492643 48
5501474 43
5501506 44
5502136 46
5502580 42
5502585 43
5502632 13, 39
5502667 43
5502674 42
5502776 13, 39
5502780 40
5502781 45
5503137 41
5503141 27
5503415 42
5503613 42
5503628 43
5503640 45
5503839 16
5503948 37
5503971 37, 38
5504008 42
5504013 44
5504014 46
5504022 43
5504026 46
5504118 32
5504407 44
5504566 46
5504567 46
5504614 39
5504632 13, 39
5504634 40
Part No. Page
97
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Part Number Index
Fiber Optic Products Catalog
Part Number Index
6
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
6278350 40, 41
6278398 47
6278399 47
6278529 21
6278750 47
6278751 47
6348522 37, 48
6374150 32
6374223 40
6374392 23
6374448 23
6374493 20
6374537 23
6374538 23
6374539 23
6374600 23
6374639 23
6374738 23
Part No. Page
5504640 39
5504649 44
5504655 36
5504657 13, 36
5504663 41
5504883 27
5504915 44
5504927 36
5504928 13
5504936 36
6278049 40
6278050 45
6278051 41
6278079 48
6278082 48
6278309 37, 38
6278348 39
6278349 45
Part No. Page
6374743 23
6374887 24
6374906 47
6457078 23
6457173 23
6457174 23
6457394 23
6457398 23
6457493 37, 38
6457543 32, 33
6457567 13, 34
6457981 16
6457983 16
6588189 32
6588291 48
6588572 12
6588573 12
6588612 32, 33
Part No. Page
6588871 70
6588967 17
6693067 17
6693068 17
6693069 17
6693276 48
6754264 44
6754475 92
6754482 48
6754483 48
6828094 31
6828095 31
6828099 36
6828100 36
6828129 31
6828130 31
6828454 92
Part No. Page
98
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999
Revised 4-10 and inches unless otherwise reference purposes only. Canada: +1 (905) 470-4425 UK: +44 (0) 800-267666
specified. Values in brackets Specifications subject Mexico/C. Am.: +52 (0) 55-1106-0814 France: +33 (0) 1-3420-8686
www.tycoelectronics.com are standard equivalents. to change. South America: +55 (0) 11-2103-6000 China: +86 (0) 400-820-6015
Part Number Index (Continued)
Fiber Optic Products Catalog
58424 56
58433 56
58551 56
58552 56
228025 56
492025 56
492026 56
492131 56
492575 25
492577 25
492578 25
492622 56
492623 56
492697 49
492703 49
492782 56
492783 56
501473 52
501818 56
502249 56
502259 56
502418 52
502631 56
502656 56
502862 56
503304 56
503337 56
503705 49
Part No. Page
503746 51
503890 56
503910 56
503911 56
503967 25
504035 52
504064 51
504290 51
504862 56
1278022 49
1278023 49
1278118 49
1278201 25
1278498 25
1278627 56
1278632 56
1278997 52
1374503 49
1374547 25
1374674 25
1457019 25
1457628 52
1457630 56
1515269 86
1515270 86
1515567 86
1515568 86
1515569 86
1515570 86
1515571 86
1515572 86
1515573 86
Part No. Page
1515574 86
1515575 86
1515632 86
1515787 86
1515867 86
1515868 86
1516142 86
1588175 56
1588176 52, 56
1588698 16
1588700 86
1588756 52, 56
1588908 86
1693797 86
1693800 86
1754074 52, 56
1754122 86
1754136 56
1754137 56
1754138 49
1754462 52
1754515 92
1754516 92
1754517 92
1754603 51, 52
1754636 56
1754765 53
1754766 53
1754767 25, 53
1754768 53
1754845 49
1828352 96
Part No. Page
1828353 96
1828833 53
1828834 25, 53
1828835 25, 53
1828836 53
1828837 53
1871696 50
1918016 94
1918082 94
1918652 52
1918802 26, 54
1918803 26, 54
1918804 54
1918805 54
1918806 26, 54
1918807 55
1918808 55
1918809 26, 54
1918810 55
1918811 55
1918930 92
1985006 94
1985040 53
1985041 53
1985162 96
1985212 93
2064431 56
2064540 49
5492576 25
5502871 25
6374548 25
6374671 25
Part No. Page
Tooling and Accessories Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
1307895–5M–LUG–FP–4-10 Tyco Electronics Corporation
Printed in the U.S.A. www.tycoelectronics.com
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-2103-6000
Fax: +55-11-2103-6030
Chile – Santiago
Phone: +56-2-345-0361
Fax: +56-2-223-1477
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-319-8959
Fax: +57-1-319-8960
Mexico & Central America –
Mexico City
Phone: +52-55-1106-0814
+01-800-733-8926
Fax: +52-55-1106-0901
For Latin/South American
Countries not shown
Phone: +55-11-2103-6000
Fax: +54-11-4733-2083
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax: +1-717-986-7575
Product Information Center:
Phone: +1-800-522-6752
Fax: +1-717-986-7575
Troy, MI
Phone: +1-248-273-3359
Fax: +1-248-273-3322
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Kawasaki, Kanagawa
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax: +60-3-7805-3066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-400-820-6015
Fax: +86-21-2407-1599
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Tai wan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Fax: +84-8-930-3443
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax: +43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax: +43-1-905-60-1251
Belarus – Minsk
Phone: +375 17 237 47 94
Fax: +375 17 237 47 94
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax: +32-16-352-355
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax: +420-541-162-223
Product Information Center:
Phone: +420-541-162-113
Fax: +420-541-162-132
Denmark – Glostrup
Phone: +45-43-48-04-00
Fax: +45-43-44-14-14
Egypt – Cairo
Phone: +202-419-2334
Fax: +202-417-7647
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax: +33-1-3420-8623
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8804
Fax: +33-1-3420-8699
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Greece – Athens
Phone: +30-210-9370-
396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax: +36-1-289-1017
Ireland – Dublin
Phone: +353-1-866-5612
Fax: +353-1-866-5714
Israel – Petach-Tikva
Phone: +972-3-929-0999
Fax: +972-3-919-1088
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031-116
Product Information Center:
Phone: +39-011-4012-428
Fax: +39-011-40-287-428
Lithuania and Latvia
Lithuania – Vilnius
Phone: +370-5-213-1402
Fax: +370-5-213-1403
Product Information Center:
Phone: +370-5-211-3016
Fax: +370-5-213-1403
Netherlands – ’s-
Hertogenbosch
Phone: +31-73-6246-246
Fax: +31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-88-50
Fax: +47-66-77-88-55
Poland – Warsaw
Phone: +48-22-4576-700
Fax: +48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax: +48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-790-7902
Fax: +7-495-721-1893
Product Information Center:
Phone: +7-495-790-7902-404
Fax: +7-495-790-7902-401
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax: +27-41-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
+90-212-282-
5130/5430
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-44-206-2265
Fax: +380-44-206-2264
Product Information Center:
Phone: +380-44-206-2265
Fax: +380-44-206-2264
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax: +44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax: +44-208-420-8095
Tyco Electronics Corporation
Harrisburg, PA
www.tycoelectronics.com
1307895–5M–CIS–LUG–FP–4-10
Fiber Optic Products
Catalog 1307895 Revised 4-10 Fiber Optic Products
