Brushless DC Motor Specifications External Height / Width External Depth Current Type Power Connection Type Lead Length Rated Voltage Operating Voltage Range Starting Voltage Rated Speed Acoustic Noise Static Pressure Rated Current Rated Power Weight Direction of Rotation Operating Temperature Storage Temperature Bearing System Air Flow Frame Impeller Locked Rotor Protection : 92mm : 25mm : DC : Lead Wires : 300mm : 12V DC : 4.5 to 13.8V DC : 4.5V DC (25C, Power On/Off) : 2,700 RPM 10% at rated Voltage : 32dB (A) : 0.13"-H2O : 135mA : 1.6W : 94g : Counter-clockwise viewed from front of fan blade : -10C to +70C : -40C to +70C : VAPO bearing system : 45 CFM : Thermoplastic PBT : Thermoplastic PBT : Automatic Restart Capacity Note In a situation where the fan is locked by a external force while the electricity is on, an increase in coil temperature will be prevented by temporarily turning off the electrical power to the motor. The fan will automatically restart when the locked rotor condition is released www.element14.com www.farnell.com www.newark.com Page <1> 24/01/13 V1.0 Brushless DC Motor One directional exhaust Best Mounting Direction: Fan blade face up or shaft horizontal direction Performance Curves Part Number Table Description Part Number Fan, 92mm x 92mm x 25mm, 12V DC MC35347 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 24/01/13 V1.0