SUNON [seecircation FOR svrovat. CUSTOMER MOTOR TYPE DESCRIPTION DIMENSIONS MODEL ~ P/N SUNON SPEC. NO OE tye MagLev Motor Blower 60X60X15 mm GB1206PHV3-AY GN D06031480G-00 APPROVAL NO. - APPROVED BY (AUTHORIZED) SPEC.NO D06031480G-00 | | ISSUE DATE [10.28.2005 DRAWN CHECKED APPROVE] EDITION 0 10/28 7 pl wh yt REVISION DATE| _ y E.SPEC EB60016 JHE TER SE AER a] SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. TEL:886-7-7163069(41 LINES) FAX:886-7-7163086~89 12FL., 120 CHUNG CHENG 1ST RD., KAOHSIUNG, TAIWAN, R.O.C. =SUNON P/N || CHARACTERISTICS | 1. Motor Design 2. Insulation Resistance 3. Dielectric Strength 4, Noise Level 5. Input Power, Current & Speed 6. Tolerance 7. Air Performance DC BRUSHLESS BLOWER MODEL : GB1206PHV3-AY : GN Patented single-coil DC brushless 4 pole motor design. More than 500M ohm between internal stator and lead wire(+) measured at DC 500V. Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+) Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with the microphone at a distance of one meter from the fan intake. Measured after continuous 10 minute operation at rated voltage in clean air, and at ambient temperature of 25 degrees C. +15% on rated power and current. Measured by a double chamber. The values are recorded when the fan speed has stabilized at rated voltage. ENE EL Se Be AERA Hl SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO D06031480G-00| REVISION DATE ISSUE DATE] 10.28.2005 JEDITION (|p PAGE 2 OF 9SUNON | SPECIFICATIONS | MODEL : GB1206PHV3-AY P/N : GN 1-1. Rated Voltage 1-2. Operating Voltage Range 1-3. Starting Voltage 1-4. Rated Speed 1-5. Air Delivery 1-6. Static Pressure 1-7. Rated Current 1-8. Rated Power 1-9. Noise Level 1-10. Direction of Rotation 1-11. Operating Temperature 1-12. Storage Temperature 1-13. Bearing System 1-14. Weight 1-15. Safety 1-16. Vibration 1-17. Locked Rotor Protection : 12 VDC : 6~13.8 VDC : 6 VDC (25 deg. C POWER ON/OFF) : 3200 RPM + 15% : 3.5 CFM : 0.18 Inch-H20 : 40mA : 0.5 WATTS : 29 dB(A) : Counter-clockwise viewed from front of fan blade : -10 to +70 deg. C : -40 to +70 deg. C : Vapo bearing system : 45 : UL/CUR/TUV/CE Approvals : Vibration of acceleration 1.5G and frequency 5~50~5Hz is applied in all 3 directions(X,Y,Z), in cycles of 1 minute each, for a total vibration time of 30 minutes. : Automatic Restart Capability Note: In a situation where the fan is locked by an external force while the electricity is on, an increase in coil temperature will be prevented by temporarily turning off the electrical power to the motor. The fan will automatically restart when the locked rotor condition is released. EE ee AR al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO D06031480G-00| REVISION DATE ISSUE DATE| 10.28.2008 [EDITION |@ PAGE 3 OF 9SUNON MODEL : GB1206PHV3-AY P/N >: GN PERFORMANCE CURVES STATIC PRESSURE mm-H20 Inch-H20 12 0.40 8 0.20 + 4 19 CFM 0 : 0 0.07 0.14 3 | | | m /min PLE EE RET SEE BRA] SPEC.NO {D06031480G-00| REVISION DATE | 7&2 SUNONWEALTH ELECTRIC ISSUE DATE| 10.28.2008 IEDITION (|<. MACHINE INDUSTRY CO.,LTD.| PAGE 4 OF 9SUNON MATERIAL 2-1. Frame 2-2. Impeller 2-3. Bobbin 2-4. Lead Wire | DIMENSIONS | 25403 o +1 oO = AIR FLOW 6 5 29.1403 Thermoplastic PBT of UL 94V-0 Thermoplastic PBT of UL 94V-0 Thermoplastic PBT of UL 94V-0 UL2468,26 awg,+RED,-BLACK 15.4405 1. One directional exhaust 2. Best Mounting Direction: Fan blade face up or shaft horizontal direction. UL2468 #26AWG +RED(4),~:BLACK() UNITS: mm Jee BS BE TSE BRS] SPEC.NO D06031480G-00] REVISION DATE 17> SUNONWEALTH ELECTRIC ISSUE DATE] 10.28.2005 |E DITION (J MACHINE INDUSTRY CO.,LTD.| PAGE. 5 OF 9SUNON I . Safety outlined in this specification. your product. your product to production. may cause damage. wiring. There may be smoking or fire. 1.SUNON will not guarantee this product if your application exceeds the limitations 2.There is no thermo-protector installed in this product, such as thermo-fuse, or current-fuse or thermo-protector. There may be smoking, ignition, or electric shock by insulation degradation in cases of motor lock, motor lead short circuit, overload, over voltage, and/or other failure. Please add the protection circuit to 3.There is no reverse-connection prevention diode of VDC (+) and GND (- ) installed in this product. Therefore, if VDC( +) and GND(- ) are reverse connected, it may cause smoking, ignition, and/or destruction, although these conditions may not manifest immediately. We recommend that a protection device be installed on your product when there is a possibility of reverse-connection. 4.Please verify that this product is being installed and used in compliance with all safety standards. Please inform SUNON of any safety concerns prior to releasing 5.Please handle and install this product carefully. Hitting or dropping this product 6.Please do not damage this product including coil and lead wires while installing or 7.Sunon doesnt suggest customers to use power or ground PWM to control the fan speed, if necessary, we need to do the special design for the application. RENEE ie LR AIRE ] SPEC.NO SUNONWEALTH ELECTRIC ISSUE DATE py | MACHINE INDUSTRY CO.,LTD.| PAGE D06031480G-00] REVISION DATE 10.17.2008 JIEDITION |@ 6 OF 9SUNON [Notes | Il .Specification modification 1.SUNON offers engineering assistance on fan installation and cooling system design. 2.Any change to the parameters specified in this document will be determined by mutual agreement between both parties. Parameters which are not specified in this specification will be identical to the final sample which has been approved by your company. 3.Product will be shipped in accordance with this specification unless Sunon has been previously notified of parameters requiring exception. 4.Parameters modified by mutual consent will be incorporated in this specification. 5.Please notify SUNON in advance of any modification to your product or new application for this fan which may require a review of this specification. Pte EE RET SERS AA] SPEC.NO _ |D06031480G-00| REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE} 10.28.2005 JEDITION jt MACHINE INDUSTRY CO.,LTD.| PAGE 7 OF 9SUNON [Notes| Il . Other 1.When building your device, please examine thoroughly any variation of EMC, temperature rise, life data, quality, etc. of this product by shock/drop/vibration testing, etc. If there are any problems or accidents in connection with this product, it should be mutually discussed and examined. 2.Fan holders or bearings may be damaged if touched with fingers or other objects. Additionally, static electricity (ESD) may damage the internal circuits. Please handle this product carefully. 3.Please avoid operating SUNONs product in poisonous material (organic silicon, cyanogens, formalin, phenol, etc.) or corrosive gas environments (H2S, SO2, NO2, Cl2, etc). 4.SUNON does not warrant performance safety against accidents caused by dust, water, droplets, dew, bugs, etc. 5.Please advise us in advance if you require documents for export. 6.Improper mounting may cause harsh resonance, vibration, and noise. Please mount securely. 7.Safety is a top priority. Please furnish guard accessories to prevent injury to personnel. 8.Unless otherwise noted, all tests are conducted at 25C ambient temperature and 65% relative humidity. 9.Always ensure that fans are stored according to the storage temperatures specified. Do not store in a high humidity environment. If the fans are stored for more than 6 months, SUNON recommends functional testing before using. 10.SUNON reserves the right to use components with equivalent specifications from multiple sources. EET SES A] SPEC.NO _|D06031480G-00] REVISION DATE Si SUNONWEALTH ELECTRIC ISSUE DATE| 10.28.2005 [EDITION |@ ! MACHINE INDUSTRY CO.,LTD.|" P A GE 8 OF 9SUNON [Declaration of RoHS | Control declaration of environment- related substances/ materials 1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive, Sunon product with P/N: GN models have complied with law and discipline not to employ the forbidden substances, and restrict the allowable concentration of some limited substances deliberately in our components. 1 Halogens & its compounds (Substances depleting the ozone layer) Forbidden 2 \Chlorinated Organic Solvent Forbidden Plastic (Frame, Impeller, wire harness, etc.) | <100ppm Solder <1000ppm 3 [Lead and its compounds Iron Alloy <3500ppm Aluminium Alloy <4000ppm Copper Alloy <4wt% Solder <20ppm 4 |Cadmium and its compounds (ce brase. eine fo aie casting) ining zine <100ppm Plastic <Sppm 5 PBB and PBDE Category Forbidden 6 [PCB and PCT Category Forbidden 7 1CP Forbidden 8 (Mirex Forbidden 9 IPCN category Forbidden 10 Hexavalent Chromium Compounds <100ppm 11 Mercury and its compounds Forbidden 12 [Asbestos Forbidden 13 (Organic Tin Compounds Forbidden 14|Azo Compounds Forbidden SHEER BRT SEN AB] SPEC.NO D06031480G-00| REVISION DATE! SUNONWEALTH ELECTRIC ISSUE DATE| 10.17.2008 |E DITION {0 KE MACHINE INDUSTRY CO.,LTD. paGE 9 OF 9 fe ar ea 7