Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller General Description Features The AP3772H is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous conduction mode (DCM) flyback power supplies. * * * * * The AP3772H provides accurate constant voltage, constant current (CV/CC) regulation without requiring an opto-coupler and the secondary control circuitry. It also eliminates the need of loop compensation circuitry while maintaining good stability. The AP3772H can achieve excellent regulation and high average efficiency, yet meets no-load consumption less than 30mW. It can also achieve excellent dynamic performance while maintaining 30mW standby power with AP4340. * * * * * * AP3772H Primary Side Control for Tight Constant Current and Constant Voltage 30mW No-load Input Power Excellent Dynamic Performance with AP4340 Bipolar Junction Transistor (BJT) Driving Proprietary Adjustable Line Compensation for CC Variation Constant and Built-in 6%, 3% and No Cable Voltage Drop Compensation Enhanced Audio Noise Suppression Open Circuit Protection Over Voltage Protection Short Circuit Protection SOT-23-6 package Applications The AP3772H has a built-in fixed cable voltage drop compensation function. The magnitude of the cable compensation voltage is set as 3% of the rated output voltage. It also has an adjustable built-in line compensation function to achieve tight CC. * * * Adapters/Chargers for Cell/cordless Phones, PDAs, MP3 and Other Portable Devices LED Driver Standby and Auxiliary Power Supplies The AP3772H is available in SOT-23-6 package. SOT-23-6 Figure 1. Package Type of AP3772H Dec. 2012 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Pin Configuration K6 Package (SOT-23-6) Pin 1 Mark 1 6 2 5 3 4 Figure 2. Pin Configuration of AP3772H (Top View) Pin Description Pin Number Pin Name 1 OUT 2 GND 3 VCC 4 CS 5 CPC 6 FB Dec. 2012 Function The OUT pin is used to turn on and turn off the power switch. When turning on the power switch, the OUT pin will output 30mA source current to support the base current of the power BJT. When turning off the power switch, the resistance between the OUT and GND will become to 5 The GND pin is the ground of the IC. When the power BJT is turned off, a fast reverse sinking current to the gate of BJT will flow out from this pin. Attention should be paid to in the PCB layout The VCC pin supplies the power for the IC. In order to get the correct operation of the IC, a capacitor with low ESR should be placed as close as possible to the VCC pin The CS is the current sense pin of the IC. The IC will turn off the power BJT according to the voltage on the CS pin. When the power BJT is on, a current is output from the CS pin which is proportional to the line voltage to realize the function of line compensation A capacitor more than 10nF should be connected to this pin. The voltage of CPC pin is linear to load of the system and it is used for the functions of cable voltage drop compensation and audio noise suppression The CV and CC regulation are realized based on the voltage sampling of this pin Rev. 1. 1 BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Functional Block Diagram VCC 3 UVLO FB OVP & OCKP 6 PRO Regulator & Bias UVLO 0.1V COMP Tonsec Detector PFM TONS Dynamic Response Pro VFB Constant Voltage Control EA Dyn R Q CV_ctrl PFM Driver 1 OUT CC_ctrl S Line Compensation Shutdown Peak Current Control & LEB VREF1 Pre_Shutdown VREF2 CS 4 TONS Constant Current Control R Q CC_ctrl S Audio noise Suppression 2 GND Cable Compensation 5 CPC Figure 3. Functional Block Diagram of AP3772H Dec. 2012 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Ordering Information AP3772H - Circuit Type G1: Green Cable Compensation Voltage A: 6% B: 3% C: 0 TR: Tape & Reel Package K6: SOT-23-6 Package SOT-23-6 Temperature Range Cable Compensation Voltage -40 to 85C Part Number Marking ID 6% AP3772HAK6TR-G1 GBC 3% AP3772HBK6TR-G1 GKJ 0 AP3772HCK6TR-G1 GJD Packing Type Tape & Reel Tape & Reel Tape & Reel BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and green. Absolute Maximum Ratings (Note 1) Parameter Supply Voltage CS, CPC to GND FB Input Voltage Source Current at OUT Pin Operating Junction Temperature Storage Temperature Lead Temperature (Soldering, 10 sec) Thermal Resistance (Junction to Ambient) Symbol Value Unit VCC VFB ISOURCE TJ TSTG -0.3 to 30 -0.3 to 7 -40 to 10 Internally Limited 150 -65 to 150 V V V A C C TLEAD 300 C JA 200 C/W Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Dec. 2012 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Electrical Characteristics VCC =15V, TA=25C, unless otherwise specified. Parameter Symbol Conditions UVLO SECTION Startup Threshold VTH (ST) Minimal Operating Voltage VOPR(MIN) STANDBY CURRENT SECTION Startup Current IST Operating Current ICC(OPR) DRIVE OUTPUT SECTION Sink ISINK Output Current Source ISOURCE Maximum Off Time tOFF(MAX) CURRENT SENSE SECTION Current Sense Threshold VCS1 Voltage at Heavy Load Leading Edge Blanking tLEB FEEDBACK INPUT SECTION Input Resistance of FB Pin RFB Feedback Threshold VFB LINE COMPENSATION SECTION Line Compensation gm Transconductance (Note 2) CABLE COMPENSATION SECTION Cable Voltage Compensation VFB_CABLE /VFB % VCC=VTH (ST)-1V, Before startup Static current Apply 1V @ OUT pin The minimum power switch turn on time VFB=4V AP3772HA AP3772HB AP3772HC DYNAMIC FUNCTION SECTION Delay Time for Dynamic tD Function Trigger Voltage for VTRIGGER Dynamic Function PROTECTION SECTION Over Voltage Protection VFB(OVP) Maximum On Time of tonp Primary Side (MAX) Note 2: Line compensation voltage on CS pin: VCS = V IN _ DC Dec. 2012 Rev. 1. 1 Min Typ Max Unit 13 3 15.5 3.5 18 4.5 V V 0 0.2 0.6 A 250 500 600 A 150 30 14 330 40 18 500 50 25 mA mA ms 500 525 550 mV 300 500 650 ns 1 3.98 1.6 4.04 2 4.1 M V 0.8 1.2 1.6 S 5 2 6 3 0 7 4 % 110 150 200 s 120 150 180 mV 7 8 9 V 20 35 50 s N AUX R6 g m R LINE N PRI R6 + R7 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Typical Performance Characteristics 800 40 35 600 Source Current (mA) Operating Current (A) 700 500 400 300 30 25 200 100 10 15 20 25 20 10 30 15 20 Supply Voltage (V) Figure 4. Operating Current vs. Supply Voltage 30 Figure 5. Source Current vs. Supply Voltage 5.0 500 4.5 Operating Current (A) Minimal Operating Voltage (V) 25 Supply Voltage (V) 4.0 3.5 3.0 450 400 350 2.5 2.0 -40 -20 0 20 40 60 80 100 120 300 -40 140 o 0 20 40 60 80 100 120 140 Ambient Temperature ( C) Figure 6. Minimal Operating Voltage vs. Ambient Temperature Dec. 2012 -20 o Ambient Temperature ( C) Figure 7. Operating Current vs. Ambient Temperature Rev. 1. 1 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Typical Performance Characteristics (Continued) 2.0 18 17 Start-up Voltage (V) Start-up Current (A) 1.5 1.0 0.5 16 15 14 0.0 -40 -20 0 20 40 60 80 100 120 13 -40 140 -20 0 20 40 60 80 100 120 140 o Ambient Temperature ( C) o Ambient Temperature ( C) Figure 8. Start-up Current vs. Ambient Temperature Figure 9. Start-up Voltage vs. Ambient Temperature 30 2.00 Source Current (mA) FB Input Resistance (M) 28 1.75 1.50 26 24 1.25 22 20 -40 1.00 -40 -20 0 20 40 60 80 100 120 140 -20 0 20 40 60 80 100 120 140 o Ambient Temperature ( C) o Ambient Temperature ( C) Figure 10. FB Input Resistance vs. Ambient Temperature Dec. 2012 Rev. 1. 1 Figure 11. Source Current vs. Ambient Temperature BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Typical Performance Characteristics (Continued) 155 575 Delay Time (s) Current Sense Voltage (mV) 600 550 150 145 525 500 -40 140 -20 0 20 40 60 80 100 120 -20 140 -10 0 o 20 30 40 50 60 70 80 o Ambient Temperature ( C) Ambient Temperature ( C) Figure 12. Current Sense Voltage vs. Ambient Temperature Figure 13. Delay Time vs. Ambient Temperature 600 50 45 575 40 LEB (ns) Primary Side Maximum On Time (s) 10 35 550 30 525 25 20 -40 -20 0 20 40 60 80 100 120 500 -40 140 0 20 40 60 80 100 120 140 o Ambient Temperature ( C) Figure 14. Primary Side Maximum On Time vs. Ambient Temperature Dec. 2012 -20 Ambient Temperature ( C) o Figure 15. LEB vs. Ambient Temperature Rev. 1. 1 BCD Semiconductor Manufacturing Limited 8 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Typical Performance Characteristics (Continued) Line Compensation Transconductance (S) 4 Feedback Voltage (V) 3.9 3.8 3.7 3.6 3.5 10 15 20 25 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 30 -20 0 20 40 60 80 100 120 140 o Ambient Temperature ( C) Supply Voltage (V) Figure 16. Feedback Voltage vs. Supply Voltage Dec. 2012 2.0 Figure 17. Line Compensation Transconductance vs. Ambient Temperature Rev. 1. 1 BCD Semiconductor Manufacturing Limited 9 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Typical Application Figure 18. 5V/1A Output for Battery Charger of Mobile Phone (The AP4340 Is Used to Achieve Fast Dynamic Response) Dec. 2012 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 10 Preliminary Datasheet Low-Power Off-line Primary Side Regulation Controller AP3772H Mechanical Dimensions SOT-23-6 Unit: mm(inch) 0 2.820(0.111) 8 3.020(0.119) 0.300(0.012) 0.400(0.016) 5 4 2 3 0.300(0.012) 0.600(0.024) 1.500(0.059) 1.700(0.067) 2.650(0.104) 2.950(0.116) 6 0.200(0.008) Pin 1 Mark 1 0.700(0.028)REF 0.950(0.037)TYP 0.000(0.000) 0.150(0.006) 1.800(0.071) 2.000(0.079) 0.100(0.004) 0.200(0.008) 0.900(0.035) 1.450(0.057) MAX 1.300(0.051) Dec. 2012 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 11 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any IMPORTANT NOTICE IMPORTANT NOTICE particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifiother rights nor the rights of others. cations herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular particular purpose, purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use MAIN SITE ofHeadquarters any its any its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited does not does not convey convey any any license license under under its its patent patent rights rights or or -of - Wafer Limited Fab BCD (Shanghai) Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. other other rights Micro-electronics rights nor the nor the rights rightsLimited of others. of others. No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based Industrial Park, 200241, P. R.C. Tel: +86-021-2416-2266, Fax: +86-021-2416-2277 MAIN SITE SITE MAIN REGIONAL SALES Manufacturing OFFICE - Headquarters BCD Semiconductor Limited 800 Yishan Road, Shanghai 200233, China Tel: +021-6485-1491, Fax: +86-021-5450-0008 - Wafer FabSemiconductor Manufacturing Limited BCD BCD Semiconductor Manufacturing Limited Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Taiwan Office (Taipei) - Wafer Fab - IC Design Group No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedCo., Industrial Park, 200241, China Yi Shan Road, Shanghai 200233, China Shanghai SIM-BCD Semiconductor Manufacturing Ltd., Shenzhen Office BCD800 Semiconductor (Taiwan) Company Limited Shanghai SIM-BCD Semiconductor Manufacturing Limited Advanced Analog Circuits (Shanghai) Corporation Tel: Fax: +86-21-24162277 Tel: +86-21-6485 1491, 0008Dist., Unit A 1203,Skyworth Bldg., Gaoxin 3F, No.17, Lane 171, Sec. 2, Jiu-Zong Rd.,Shanghai Nei-Hu Taipei(114), Taiwan, R.O.C 800,+86-21-24162266, YiRoom Shan Road, Shanghai 200233, ChinaAve.1.S., Nanshan District 8F, Zone B, 900, YiFax: Shan+86-21-5450 Road, 200233, China Shenzhen 518057,1491, ChinaFax: +86-21-5450 0008 Tel: +886-2-2656 2808 Tel: +86-21-6485 Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Tel: +86-0755-8660-4900, Fax: +86-0755-8660-4958 Fax: +886-2-2656-2806/26562950 Shenzhen OfficeSALES OFFICE Taiwan Office USA Office REGIONAL Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd., Shenzhen Office Semiconductor BCD Office Semiconductor Corp. Taiwan Office (Hsinchu) USABCD Office Korea Office USA Shenzhen Office Taiwan Office (Taiwan) Company Limited Unit ASemiconductor Room 1203, Skyworth Gaoxin Ave.1.S., Nanshan Shenzhen, 4F,Semiconductor 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD (Taiwan)Bldg., Company Limited BCD Corp. BCD Semiconductor Limited Korea office. Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited BCD China Taiwan CADigital-Empire 94544, USA Ave. 8F, No.176,Analog Sec. 2, Gong-Dao 5th Road, Corporation East District Shenzhen Office 48460 Kato CARoad, 94538, USA District, Room 101-1112, II, 486 Sin-dong, Advanced Circuits (Shanghai) 4F,Road, 298-1,Fremont, Rui Guang Nei-Hu Taipei, 30920 Huntwood Hayward, Tel: +86-755-8826 7951 +886-2-2656 2808 Tel :94544, +1-510-324-2988 HsinChu 300, Taiwan, R.O.C 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel:Tel: +1-510-668-1950 Yeongtong-Gu, Suwon-city, Gyeonggi-do, Korea Room E, City 5F, Noble Center, No.1006, Taiwan CA U.S.A Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788 Tel: +886-3-5160181, Fax: +886-3-5160181 Fax: +1-510-668-1990 Tel: +82-31-695-8430 Tel: +86-755-8826 7951 Tel: +886-2-2656 2808 Tel : +1-510-324-2988 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Diodes Incorporated: AP3772HAK6TR-G1-2 AP3772HBK6TR-G1-2 AP3772HCK6TR-GA-2 AP3772BK6TR-G1-2 AP3772APK6TR-G1-2 AP3772BNK6TR-G1-2 AP3772ANK6TR-G1-2 AP3772AK6TR-G1-2 AP3772BPK6TR-G1-2