This document was generated on 01/14/2009
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
Part Number: 0760440001
Status: Active
Overview: SFP+ Stacked Multi-Port Connectors
Description: Small Form-factor Pluggable Plus (SFP+) Stacked 2-by-1 Multi-Port Connector with 4
Lightpipe Ports, EMI Metal Gasket, 40 Circuits, Tin (Sn)/Lead(Pb) Tails
Documents:
Packaging Specification (PDF) Drawing (PDF)
3D Model Product Specification PS-75310-001 (PDF)
Application Specification (PDF) Related Catalog Page (PDF)
General
Product Family I/O Connectors
Series 76044
Application Module-to-Board
Component Type Receptacle
Overview SFP+ Stacked Multi-Port Connectors
Product Name SFP Plus
Type N/A
Physical
Boot Color N/A
Circuits (Loaded) 40
Circuits (maximum) 40
Circuits Detail 40
Color - Resin Black
Color - Resin Clear (Blue Tint)
Durability (mating cycles) min 100 cycles
Flammability 94V-0
Gender Female
Keying to Mating Part None
Lock to Mating Part Yes
Material - Metal Brass
Material - Metal Phosphor Bronze
Material - Plating Mating Gold
Material - Plating Termination Tin-Lead
Material - Resin High Temperature Thermoplastic
Material - Resin Polycarbonate
Number of Rows 2
Orientation Right Angle
PC Tail Length (in) 0.081 In
PC Tail Length (mm) 2.07 mm
PCB Locator Yes
PCB Retention Yes
PCB Thickness Recommended (in) 0.062 In
PCB Thickness Recommended (mm) 1.57 mm
Packaging Type Tray
Panel Mount No
Pitch - Mating Interface (in) 0.031 In
Pitch - Mating Interface (mm) 0.80 mm
Pitch - Term. Interface (in) 0.031 In
Pitch - Term. Interface (mm) 0.80 mm
Plating min: Mating (µin) 30.4
Plating min: Mating (µm) 0.76
Plating min: Termination (µin) 30.4
Plating min: Termination (µm) 0.76
Polarized to Mating Part Yes
Series image - Reference only
EU RoHS China RoHS
RoHS Compliant by
Exemption
Need more information on product
environmental compliance?
Email productcompliance@molex.com
Please visit the Contact Us section for any
non-product compliance questions.
Search Parts in this Series
76044 Series
Use With
0759510999 SFP Dust Plug,
Application Tooling
Tooling specifications and manuals are
found by selecting the products below.
Crimp Height Specifications are then
contained in the Application Tooling
Specification document.
Global
Description Product #
SFP Extraction Tool,
2 x 1 Medium 0622029930
Polarized to PCB Yes
Ports 2
Surface Mount Compatible (SMC) No
Temperature Range - Operating -40°C to +85°C
Termination Interface: Style Through Hole - Compliant Pin
Waterproof / Dustproof No
Electrical
Current - Maximum 0.500 Amp
Grounding to Panel None
Shield Type EMI Gasket
Shielded Yes
UL E29179
Voltage - Maximum 120V AC(RMS)/DC
Material Info
Reference - Drawing Numbers
Product Specification PS-75310-001
Sales Drawing SD-76044-001
This document was generated on 01/14/2009
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
PACKAGING SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No:
UCP2008-0788
C DATE:
2007 / 10 / 05
TITLE: PACKAGING SPECIFICATION
STACKED SFP/(+) 2X1 CONNECTOR ASSEMBLIES
1 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
-
001
LONG LONG NELSON
FILENAME: PK754621.DOC
THE STANDARD PACKAGING CARTONS SHALL CONSIST OF:
PRIMARY CARTON MATERIAL NUMBER 96707-0001 or 96707-1001
OVERALL OUTSIDE DIMENSIONS: LENGTH 14.5” WIDTH 7.2” HEIGHT 7.2”
ONE PACKING LABEL IS REQUIRED PER PRIMARY CARTON. APPLY LABEL TO LOWER RIGHT SIDE
OF THE PRIMARY CARTON SHOWN PER FIGURE 1.
FIGURE 1
PRIMARY CARTON
PACKAGING SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No:
UCP2008-0788
C DATE:
2007 / 10 / 05
TITLE: PACKAGING SPECIFICATION
STACKED SFP/(+) 2X1 CONNECTOR ASSEMBLIES
2 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
-
001
LONG LONG NELSON
FILENAME: PK754621.DOC
THE SFP 2X1 STACKED ASSEMBLIES ARE TO BE PLACED IN THE TRAY POCKETS SO THE
ASSEMBLIES ARE RESTING ON THEIR SIDE. THE ASSEMBLIES SHOULD BE PLACED IN THE
POCKETS SO THEIR TAILS ARE POINTING IN THE DIRECTION OPPOSITE OF THE FINGER SLOT
THAT RUNS ACROSS THE POCKETS AND THE (2) SMALL RIBS ARE IN-BETWEEN THE TAILS. THE
GROUND TABS ON THE FRONT OF THE ASSEMBLY SHOULD BE LOCATED IN THE SLOT
PROVIDED IN THE POCKET AS SHOWN IN FIGURES 2 AND 2A.
FIGURE 2
TYPICAL TRAY / SFP 2X1 STACKED ASSEMBLY PLACEMENT
FIGURE 2A
TYPICAL TRAY / SFP 2X1 STACKED ASSEMBLY PLACEMENT
PRIMARY CARTON TRAY LOADING REQUIREMENTS REFER TO FIGURE 3.
PACKAGING SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No:
UCP2008-0788
C DATE:
2007 / 10 / 05
TITLE: PACKAGING SPECIFICATION
STACKED SFP/(+) 2X1 CONNECTOR ASSEMBLIES
3 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
-
001
LONG LONG NELSON
FILENAME: PK754621.DOC
PACKAGING INSTRUCTION NOTES:
1. ONE SHEET OF MICROFOAM MATERIAL NUMBER 96720-0001 IS TO BE PLACED IN THE
BOTTOM OF CARTON.
2. FILLED TRAYS 70180-0008 TO BE STACKED 7 HIGH.
3. ONE EMPTY TRAY TO BE PLACED ON THE TOP OF THE FILLED TRAYS, SO A TOTAL OF 8
TRAYS WILL BE IN THE FINAL STACK.
4. ONE SHEET OF CIPBOARD MATERIAL NUMBER 96720-0002 TO BE PLACED ON THE TOP TRAY
AND THE PART IDENTIFICATION LABEL SHOULD BE PLACED IN THE CENTER OF THE
CHIPBOARD ON THE EXPOSED SIDE. ONE SHEET OF CHIPBOARD MATERIAL NUMBER 96720-
0002 TO BE PLACED IN THE BOTTOM OF THE CARTON.
5. MICROFOAM MATERIAL NUMBER 96720-0001 TO BE PLACED ON TOP OF THE CHIPBOARD.
ENOUGH MICROFOAM IS TO USED TO FILL THE REMAINDER OF THE CARTON, SO THE
TRAYS CANNOT MOVE DURING HANDLING OR SHIPPING.
6. STRETCH WRAP (P/N: 85-25-0001) ENTIRE TRAY STACK AND CHIPBOARD TOGETHER WITH
TWO WRAPS MINIMUM IN BOTH DIRECTIONS BEFORE PLACING INTO CARTON.
FIGURE 3
TRAY STACKING
PACKAGING SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No:
UCP2008-0788
C DATE:
2007 / 10 / 05
TITLE: PACKAGING SPECIFICATION
STACKED SFP/(+) 2X1 CONNECTOR ASSEMBLIES
4 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
-
001
LONG LONG NELSON
FILENAME: PK754621.DOC
FIGURE 4
CHIPBOARD LABEL LOCATION
PACKAGING SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No:
UCP2008-0788
C DATE:
2007 / 10 / 05
TITLE: PACKAGING SPECIFICATION
STACKED SFP/(+) 2X1 CONNECTOR ASSEMBLIES
5 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PK
-
-
001
LONG LONG NELSON
FILENAME: PK754621.DOC
PACKAGING QUANTITY REQUIREMENT PER CARTON
SFP
2X1 STACKED
ASSEMBLY NUMBER
TIN-LEAD / TIN
SFP
2X1 STACKED
ASSEMBLIES PER TRAY
FILLED
TRAYS PER
PRIMARY CARTON N
75462-0001 / 75462-5001
18 126
75640-0001 / 75640-5001
18 126
75640-0002 / 75640-5002
18 126
75640-0003 / 75640-5003
18 126
75640-0004 / 75640-5004
18 126
76044-0001 / 76044-5001
18 126
76044-0002 / 76044-5002
18 126
76044-0003 / 76044-5003
18 126
76064-0001 / 76064-5001
18 126
76090-0001 / 76090-5001
18 126
76090-0002 / 76090-5002
18 126
76090-0003 / 76090-5003
18 126
76100-0001 / 76100-5001
18 126