SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for receptacles and adapters is 1.15:1 from DC to 18 GHz, and 1.25:1 from 18 to 40 GHz. frequency than SMA connectors. The internal design is optimized using state-of-the-art Electromagnetic Finite Element The use of an air dielectric also allows for a smaller internal body diameter than SMA connectors. This "thick wall" design increases outer-conductor contact area at the interface for more reliable electrical performance and higher mechanical strength than SMA connectors. in (spark plug) connectors are available for use with hermetic seals or accessory pins with diameters of .009, .012, .015, and .020 inches. The standard hermetic seals match your application requirements. These connectors are machined to exacting tolerances and the highest quality standards on modern CNC turning centers, and assembly is tightly controlled and monitored to ensure peak consistency of performance from unit to unit. Contents (Click on any line to go to the indicated page) Adapters Within Series................................................9 Cable Plugs and Jacks..................................................4 Hermetic Seals................................................................10 Cable Jacks--Bulkhead and Panel Mounted......5 Accessory pins ...............................................................10 Field Replaceable Panel Jack Receptacles-- Square and Two-Hole Flange....................................6 Drilling Dimensions for Hermetic Seals ...............11 Field Replaceable Panel Plug Receptacles-- Square and Two-Hole Flange....................................7 Index by Part Number ................................................13 Cable Assembly Instructions ...................................12 Competitive Cross-Reference ..................................13 Thread-in ("Spark Plug") Receptacles-- Field Replaceable...........................................................8 Special / Custom Connectors .................................14 About Delta ....................................................................15 Panel Mount Receptacles-- Slotted and Post Contact.............................................8 Test Data Test Setup VSWR Delta P/N 1.25 7996000K911-003 VS WR 1.20 1.15 1.10 1.05 Delta P/N 41-10048-01-AU Mounting plate As tested 1 ( 978 ) 927-1060 0 4 8 12 28 32 36 Frequency (GHz) Two connectors tested, mounted back-to-back with a hermetic seal as shown at left. Maximum VSWR 1.22:1 @ 36.9 GHz (1.10:1 for each connector.) These results are typical and valid only for connectors set up for testing in the FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com 40 SMK Specifications SMK Interfaces ** ** Reference Plane .074 .078 .135 max. .312 hex .250-36 UNS-2A, .170 min. full thread .181 .183 dia. .218 min. .255 .178 dia. min. .180 dia. .114 .116 dia. .250-36 UNS-2B .206 .214 dia. .055 .065 .105 min. .0355 .0370 dia. Smooth blend Spherical radius .000 .005 Reference Plane .000 .005 Smooth blend Reference Plane .050 dia. To accept .0355/.0370 diameter male pin. SMK Specifications* Electrical: Nominal Impedance: 50 ohms. Frequency Range: DC-40 GHz. Voltage Rating: (Cable connectors, receptacles): 335 Volts RMS @ sea level; 85 Volts RMS @ 70,000 feet. (Adapters): 500 Volts RMS @ sea level; 125 Volts RMS @ 70,000 feet. VSWR (Cable connectors): DC-18 GHz: 1.15:1 maximum; 18-40 GHz: 1.3:1 maximum. (Receptacles, adapters): DC -18 GHz : 1.15:1 maximum; 18-40 GHz: 1.25:1 maximum. RF Transmission Loss: .03 x f (GHz) dB. Dielectric Withstanding Voltage: (Cable connectors, receptacles): 1,000 Volts RMS @ sea level. (Adapters): 1.500 Volts RMS @ sea level. RF Hipot: 670 Volts RMS @ 5 MHz. Insulation Resistance: 5,000 megohms minimum. RF Leakage: -100 dB minimum @ 2.5 GHz. Contact Res istance: Center contact: 3.0 milliohms maximum; Outer contact: 2.0 milliohms maximum. issues of MIL-PRF-39012, or MIL-PRF-55339, or other accordance with MIL-STD-348. connectors are available on request. 2 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 Force to Engage: 2 inch-pounds maximum. Coupling Nut Retention: 60 pounds minimum (plugs only). Coupl ing Proof Torque: 15 inc h-pounds minimum (plugs only). Contact Insertion Force: Insertion: 2 pounds maximum; Withdrawal: 1 ounce minimum. Durability: 500 mating cycles minimum. Mating Torque: 7-10 inch-pounds. Insulators: (Bead): Noryl EN265, polyphenylene oxide (PPO) per ASTM D4349. (Concentricity bead): Kel-F (CTFE), extruded rod per AMS 3650. Contacts: Beryllium copper (Alloy C17300) per ASTM B196. Contact Plating: Gold per ASTM B488. Other Metal Parts: Type 303 Stainless steel per ASTM A582, plated gold per MIL-G-45204 or passivated per AMS-QQ-P-35. Gaskets: Silicone rubber per A-A-59588. Operating Temperature: -55 to +135 C. Vibration: Per MIL-STD-202, Method 204, condition D. Shock: Per MIL-STD-202, Method 213, condition I. Thermal Shock: Per MIL-STD-202, Method 107, condition A. Corrosion (Salt Atmosphere): Per MIL-STD-202, Method 101, test condition B. Moisture Resistance: Per MIL-STD-202, Method 106. www.deltarf.com sales@deltarf.com SMK Cable Connectors Cable Plugs & Jacks - Direct Solder For Semi- Rigid Cable A A .365 .330 .330 .312 hex .312 hex B dia. B dia. Figure 2 Figure 1 (One-Step cable attachment) A A A .365 .330 .365 .330 .389 .330 .312 hex .312 hex .312 hex B dia. B dia. B dia. Figure 3 Figure 4 Figure 5 (One-Step cable attachment) A A .250 .445 .250 .312 dia. .312 dia. B dia. B dia. Figure 6 Figure 7 (One-Step cable attachment) (One-Step cable attachment) Straight Plugs Cable Group Figure 13 13 14 14 32 1 2 3 4 5 Dimensions A B .435 .440 .435 .508 .490 .180 .180 .120 .120 .088 Plating Body Contact Passivated(1) Passivated(1) Passivated(1) Passivated(1) Passivated(1) Gold Gold Gold Gold Gold (C) (C) Assembly Procedure/ Trim Code Delta P/N 7901031K003-000 7901031K007-000 7901094K003-000 7901094K007-001 7901111K003-000 H/01 I/01 H/01 I/02 H/01 Straight Jacks Cable Group Figure 13 14 6 7 Dimensions A B .490 .555 .180 .120 Plating Body Contact Passivated(1) Passivated(1) Gold Gold (1) Solder Cable (C) (C) Assembly Procedure/ Trim Code Delta P/N 7908031K007-000 7908094K007-000 I/01 I/02 area of body is gold plated; other body parts passivated. Delta One-Step Cable Attachment for Semi-Rigid Cable Solder Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Captive contact Cable Groups 13: .141" semi-rigid; RG-402; M17/130 14: .085" semi-rigid; RG-405; M17/133 32: .047" semi-rigid; M17/151 (C) in contact plating column indicates captive contact. * See page 12 for assembly instructions. 3 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com SMK Cable Connectors Cable Jacks - Direct Solder For Semi- Rigid Cable A .375 .500 sq. .500 sq. .102 dia. .340 (CL ) typ. B dia. typ. B dia. .065 A .375 .223 A .444 .375 .223 .102 dia. .162 dia. .102 dia. .625 .481 (CL ) typ. B dia. .065 Figure 2 (One-Step cable attachment) Figure 1 (One-Step cable attachment) .625 .481 (CL) .162 dia. .102 dia. .340 (CL) typ. typ. A .444 .375 typ. B dia. .065 .065 Figure 3 (One-Step cable attachment) Figure 4 (One-Step cable attachment) A .312 hex Mounting Hole Dimensions Figure 5 .236 (One-Step cable attachment) B dia. .125 max. panel .255 dia. .437 .455 hex Panel Jacks Cable Group Figure 13 14 13 14 1 2 3 4 Dimensions A B .490 .550 .490 .550 .180 .120 .180 .120 Plating Body Contact Passivated(1) Passivated(1) Passivated(1) Passivated(1) Gold Gold Gold Gold (C) (C) (C) (C) Assembly Procedure/ Trim Code Delta P/N 7911031K057-000 7911094K057-000 7911031K927-000 7911094K927-000 I/01 I/02 I/01 I/02 Bulkhead Jacks Cable Group Figure 13 14 5 5 Dimensions A B .640 .640 .180 .120 Plating Body Contact Passivated(1) Passivated(1) Gold (C) Gold (C) (1) Solder Cable Solder Captive contact Assembly Procedure/ Trim Code Delta P/N 7917031K677-000 7917094K677-000 I/01 I/02 area of body is gold plated; other body parts passivated. Delta One-Step Cable Attachment for Semi-Rigid Cable Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Cable Groups 13: .141" semi-rigid; RG-402; M17/130 14: .085" semi-rigid; RG-405; M17/133 (C) in contact plating column indicates captive contact. * See page 12 for assembly instructions. 4 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com SMK Receptacles Panel Jack Receptacles - Field Replaceable, Square and 2-Hole Flange .340 (CL ) typ. .102 dia. typ. .163 .250 (CL ) typ. .065 .067 Socket contact accepts pin A (.001) dia. x B long max. dia. .500 sq. .003 .163 dia. typ. .375 Reference Plane .102 dia. (2-hole flange) 3 .375 .299 .375 Reference Plane (Pin Length) .009 .012 .015 .020 .009 .012 .015 .020 .009 .012 .015 .020 2 .299 Socket contact accepts pin A (.001) dia. x B long max. .481 (CL ) .625 .003 1 .003 .065 .223 (Pin Diameter) sq. ( 3 / 8 " square flange) dia. typ. .163 Socket contact accepts pin A (.001) dia. x B long max. dia. .299 .375 ( 1/ 2 " square flange) .065 Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated .065 .085 .085 .090 .065 .085 .085 .090 .065 .085 .085 .090 Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) (C) (C) (C) (C) (C) (C) Drilling Patterns - Panel-Mount Field Replaceable Jacks 3/8" Square flange .170 3/8" typ. 2-hole flange Square flange .125 typ. .240 .500 .375 sq. sq. .481 (CL ) .250 (CL ) typ. .340 (CL ) typ. #2-56 thread, 4 places. typ. .625 .223 #0-80 thread, 4 places. #2-56 thread, 2 places. Fillister-head screws are recommended for connector body clearance when mounting. See page 11 for center hole drilling dimensions. See page 10 for hermetic seals and 5 ( 978 ) 927-1060 accessory pins. * (C) indicates captive contact. FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com Reference Plane Panel Plug .340 (CL ) typ. .102 .065 dia. typ. .163 .250 (CL ) typ. .163 Socket contact accepts pin A (.001) dia. x B long max. dia. .500 sq. .073 .375 Reference Plane .102 dia. .003 .065 .481 (CL ) .625 Socket contact accepts pin A (.001) dia. x B long max. .223 .003 .390 Reference Plane .507 (Pin Diameter) (Pin Length) .009 .012 .015 .020 .009 .012 .015 .020 .009 .012 .015 .020 1 2 3 .390 .507 ( 3 / 8 " square flange) dia. typ. .163 sq. .390 .507 ( 1/ 2 " square flange) (2-hole flange) Socket contact accepts pin A (.001) dia. x B long max. dia. .003 .065 dia. typ. .065 .085 .085 .090 .065 .085 .085 .090 .065 .085 .085 .090 Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) (C) (C) (C) (C) (C) (C) Drilling Patterns - Panel-Mount Field Replaceable Plugs 3/8" Square flange .170 3/8" typ. 2-hole flange Square flange .125 typ. .240 .500 .375 sq. sq. .481 (CL ) .250 (CL ) typ. .340 (CL ) typ. #2-56 thread, 4 places. #0-80 thread, 4 places, .125 max. screw length. typ. .625 .223 #2-56 thread, 2 places. Fillister-head screws are recommended for connector body clearance when mounting. See page 11 for center hole drilling dimensions. See page 10 for hermetic seals and 6 ( 978 ) 927-1060 accessory pins. * (C) indicates captive contact. FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com Reference Plane Panel Receptacles Jack Receptacle--Slotted Contact .040 C dia. typ. B (CL ) typ. A Plug Receptacle--Slotted contact .065 dia. C (.001) dia. typ. B (CL ) typ. Slot .020 wide (.001) sq. A .375 .021 .027 .040 .065 dia. (.001) Slot .020 wide (.001) sq. .511 .021 .027 Figure 1 Figure 2 Jack Receptacle--Post Contact B (CL ) typ. .065 .500 .163 Figure 3 dia. A C dia. .025 typ. sq. dia. .003 .375 Figure 1 2 3 .500 .500 .375 .340 .340 .250 .012 .012 .067 Passivated Passivated Passivated Gold (C) Gold (C) Gold (C) (C) indicates captive contact. These items are available with other flange sizes and contact configurations. Thread-in Receptacles - Field Replaceable, Jack and Plugs Reference Plane .250 .163 dia. Socket contact accepts pin A (.001) dia. x B long max. dia. .329 Reference Plane .250 dia. .163 Socket contact accepts pin A (.001) dia. x B long max. .003 .405 .218 1 2 (Pin Diameter) .009 .012 .015 .020 .009 .012 .015 .020 .520 .312 hex .003 .635 Figure 1 Figure dia. Figure 2 (Pin Length) .065 .085 .085 .090 .065 .085 .085 .090 Passivated Passivated Passivated Passivated Passivated Passivated Passivated Passivated Gold Gold Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) (C) (C) See page 10 for hermetic seals and accessory pins. * See page 11 for mounting hole drilling. (C) indicates captive contact. 7 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com SMK Adapters Adapters Within Series B Reference Plane .312 hex A Figure 1 (Straight jack-jack; connects two plugs) Reference Plane .723 Reference Plane .612 .255 dia*. .312 hex .255 dia*. .312 hex .236* A B .236* .375 hex A *Mounting Hole Dimensions B .375 hex *Mounting Hole Dimensions Figure 2 Figure 3 (Bulkhead jack-jack; connects two plugs) Fits panel .187" thick maximum (Bulkhead jack-jack; connects two plugs) Fits panel .160" thick maximum Reference Plane B .312 hex .218 across flats A Figure 4 (Straight jack-plug; connects one plug and one jack) Reference Plane B .218 across flats A Figure 5 (Straight plug-plug; connects two jacks) Figure 1 1 2 3 4 5 Dimensions A B .590 .764 .875 .764 .805 .846 .438 .612 .500 .480 .612 .612 Plating Body Passivated Passivated Passivated Passivated Passivated Passivated Contact Gold Gold Gold Gold Gold Gold (C) (C) (C) (C) (C) (C) Delta P/N 7928000K001-000 7928000K001-001 7926000K671-000 7926000K671-001 7934000K001-001 7927000K001-001 (C) indicates captive contact. 8 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com SMK Accessories Hermetic Seals These drawings are 200% scale compared with connector drawings for clarity. Hermetic seals are available with other pin lengths to suit your specific requirement. C D A .001 dia. E both ends spherical radius both ends Pin to circuit Pin to connector B Ring and pin material: Kovar, gold plated per MIL-G-45204 Type II, Grade C, Class 1. Leak rate: >1 x 10-8 cc/sec @at 14.7 PSIG differential, using 100% helium. Impedance: 50 2 . Dimensions A B C D E Glass Type .009 .009 .012 .012 .012 .015 .018 .020 .026 .120 .180 .080 .029 .125 .180 .125 .031 .031 .073 .040 .040 .050 .072 .050 .055 .055 .069 .055 .055 .062 .060 .060 .068 .068 .076 .076 .076 .098 .110 .158 7070 7070 7070 7070 7070 7070 7070 7052 Frequency Range DC-65.0 DC-65.0 DC-42.0 DC-42.0 DC-42.0 DC-28.0 DC-18.0 DC-8.0 GHz GHz GHz GHz GHz GHz GHz GHz Delta P/N 41-10050-01-AU 41-10051-01-AU 41-10044-01-AU 41-10045-01-AU 41-10049-01-AU 41-10046-01-AU 41-10047-01-AU 41-10048-01-AU See page 11 for mounting hole dimensions. Accessory Pins These drawings are 200% scale compared with connector drawings for clarity. Pins are available with other tab sizes and configurations to suit your specific requirement. Figure 1 A dia. .001 C Figure 2 B A dia. .001 spherical radius Tab D thick x E wide B C Tab D thick x E wide Material: Beryllium copper, Alloy C17300, condition H, per ASTM B196 Finish: Gold plated per MIL-G-45204 Type II, Class 1, Grade C, over nickel plate per AMS-QQ-N-290, Class 1, Grade G. Figure 1 1 1 1 1 2 9 Dimensions C A B .009 .012 .015 .018 .020 .036 .050 .050 .085 .085 .080 .075 ( 978 ) 927-1060 .015 .025 .040 .045 .050 .050 FAX ( 978 ) 922-6430 Delta P/N D E .005 .005 .005 .005 .006 .005 .009 .012 .015 .018 .020 .020 www.deltarf.com 81-10293-01-AU 33-10432-01-AU 33-10416-01-AU 81-10294-01-AU 81-10260-01-AU 81-10275-01-AU sales@deltarf.com SMK Accessories Drilling For Hermetic Seals - Panel Mount Receptacles Pin Hermetic Seal P/N Dia. 41-10044-01-AU 41-10045-01-AU 41-10046-01-AU 41-10047-01-AU 41-10048-01-AU 41-10049-01-AU 41-10050-01-AU 41-10051-01-AU .012 .012 .015 .018 .020 .012 .009 .009 Note 2 B A Dimensions A B C D E F .0035/.0025 .072/.071 .028/.027 .067/.065 .079/.078 .0035/.0025 .057/.056 .028/.027 .067/.065 .079/.078 .007/.005 .0645/.0635 .035/.034 .080/.078 .102/.100 .009/.007 .062/.061 .042/.041 .086/.084 .113/.112 .010/.009 .062/.061 .0465/.0455 .126/.124 .161/.160 .0035/.0025 .057/.056 .028/.027 .067/.065 .079/.078 .008/.006 .058/.057 .0211/.0205 .0322/.0302 .074/.072 .008/.006 .058/.057 .0211/.0205 .0322/.0302 .074/.072 .098 .098 .120 .130 .178 .098 .091 .091 F dia. C dia. Note 1: Surface treatment (plating) must be compatible with soldering process. Note 2: User-determined. Recommended F diameter x .025 deep to accommodate 3 solder rings, .010 diameter each. D dia. E dia. .125 typical panel Drilling For Hermetic Seals - Bulkhead Mount Receptacles Note 2 .211/.209 B A .250 typical panel .221 dia. -A- C dia. D dia. E dia. F dia. .250-36 UNS-2B thread, .120 min. full thread. .001 T.I.R. A Pin Dimensions Hermetic Seal P/N Dia. 41-10044-01-AU 41-10045-01-AU 41-10046-01-AU 41-10047-01-AU 41-10048-01-AU 41-10049-01-AU 41-10050-01-AU 41-10051-01-AU .012 .012 .015 .018 .020 .012 .009 .009 A B C .0035/.0025 .072/.071 .028/.027 .0035/.0025 .057/.056 .028/.027 .007/.005 .0645/.0635 .035/.034 .009/.007 .062/.061 .042/.041 .010/.009 .062/.061 .0465/.0455 .0035/.0025 .057/.056 .028/.027 .008/.006 .058/.057 .0211/.0205 .008/.006 .058/.057 .0211/.0205 D E F .067/.065 .067/.065 .080/.078 .086/.084 .126/.124 .067/.065 .0322/.0302 .0322/.0302 .079/.078 .079/.078 .102/.100 .113/.112 .161/.160 .079/.078 .074/.072 .074/.072 .098 .098 .120 .130 .178 .098 .091 .091 Note 1: Surface treatment (plating) must be compatible with soldering process. Note 2: User-determined. Recommended F diameter x .025 deep to accommodate 3 solder rings, .010 diameter each. 10 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com SMK Cable Assembly Instructions Assembly Procedure H Assembly Procedure I Trim Codes Code A H/01 .090 Trim Codes Body assembly Code A B I/01 .090 .000 I/02 .090 .015 Contact B Chamfer or radius A 1) Trim cable as shown. Remove any burrs from jacket and center conductor. A 1) Trim cable as shown. Remove any burrs from jacket and center conductor. (For trim code 01): Cable end flush with insulator Soft solder all around Body assembly .015" 2) Solder contact to center conductor, fixturing to maintain gap as shown. Remove any excess solder from outside of contact. Cable end flush with insulator Soft solder all around (For trim code 02): Cable end flush with step in body Soft solder all around Body assembly 2) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator (or step inside body) as shown. 3) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Plug body assembly and contact shown; procedure is identical for jack connectors. Plug body assembly and contact shown; procedure is identical for jack connectors. 11 ( 978 ) 927-1060 FAX ( 978 ) 922-6430 www.deltarf.com sales@deltarf.com SMK Index / Cross Reference Index by Delta Part Number (Click on any line to go to the indicated page.) Delta P/N Page 33-10416-01-AU ............................10 33-10432-01-AU ............................10 41-10044-01-AU ............................10 41-10045-01-AU ............................10 41-10046-01-AU ............................10 41-10047-01-AU ............................10 41-10048-01-AU ............................10 41-10049-01-AU ............................10 41-10050-01-AU ............................10 41-10051-01-AU ............................10 7901031K003-000............................4 7901031K007-000............................4 7901094K003-000............................4 7901094K007-001 . ........................4 7901111K003-000............................4 7908031K007-000............................4 7908094K007-000............................4 7911031K057-000............................5 7911031K927-000............................5 7911094K057-000............................5 7911094K927-000............................5 7917031K677-000............................5 Delta P/N Page 7917094K677-000.............................5 7921000K821-001 ............................8 7921000K821-002 ............................8 7921000K821-004 ............................8 7921000K821-005 ............................8 7924000K001-001 ............................8 7924000K001-002 ............................8 7924000K001-003 ............................8 7924000K001-004 ............................8 7926000K671-000.............................9 7926000K671-001 ............................9 7927000K001-001 ............................9 7928000K001-000.............................9 7928000K001-001 ............................9 7934000K001-001 ............................9 7943000K051-000.............................8 7958000K911-000.............................8 7959000K051-000.............................8 7996000K051-001 ............................6 7996000K051-002 ............................6 7996000K051-003 ............................6 7996000K051-004 ............................6 7996000K911-001 ............................6 Delta P/N Page 7996000K911-002 ............................6 7996000K911-003 ............................6 7996000K911-010 ..........................6 7996000K921-001 ............................6 7996000K921-002 ............................6 7996000K921-003 ............................6 7996000K921-004 ............................6 7997000K051-001 ............................7 7997000K051-002 ............................7 7997000K051-003 ............................7 7997000K051-004 ............................7 7997000K911-001 ............................7 7997000K911-002 ............................7 7997000K911-003 ............................7 7997000K911-012 ..........................7 7997000K921-001 ............................7 7997000K921-002 ............................7 7997000K921-003 ............................7 7997000K921-004 ............................7 81-10260-01-AU ............................10 81-10275-01-AU ............................10 81-10293-01-AU ............................10 81-10294-01-AU ............................10 Competitive Cross-Reference Anritsu P/N Delta P/N K101M-085 ..................7901094K003-000 K102F ...........................7921000K821-001 K102M .........................7924000K001-001 K103F ...........................7996000K921-002 K103M .........................7997000K921-002 K104F ...........................7996000K051-002 K104M .........................7997000K051-002 Astrolab P/N Delta P/N 29963-1........................7996000K051-002 29963-2........................7996000K921-002 29964...........................7921000K821-001 Dynawave P/N Delta P/N 1100-9494-6200 ..........7927000K001-001 1100-9495-6200 ..........7934000K001-001 1100-9595-6200 ..........7928000K001-001 1110-9595-6200 ..........7926000K671-001 9400-4725-6200 ..........7901111K003-000 9400-8525-6200 ..........7901094K003-000 9430-0085-6200 ..........7924000K001-001 9430-0085-6208 ..........7924000K001-003 9452-0085-6209 ..........7997000K921-001 9452-0085-6212 ..........7997000K921-002 9452-0085-6217 ..........7997000K921-004 9452-0085-6220 ..........7997000K921-003 9454-0085-6203 ..........7997000K911-002 9454-0085-6204 ..........7997000K911-012 9454-0085-6209 ..........7997000K051-001 9454-0085-6212 ..........7997000K051-002 9454-0085-6215 ..........7997000K051-004 9454-0085-6220 ..........7997000K051-003 9500-4725-6200 ..........7908094K007-000 9510-8520-6200 ..........7917094K677-000 9530-0085-6200 ..........7921000K821-001 9530-0085-6208 ..........7921000K821-005 12 ( 978 ) 927-1060 Dynawave P/N Delta P/N 9552-0085-6200 ..........7996000K921-002 9552-0085-6208 ..........7996000K921-001 9552-0085-6217 ..........7996000K921-004 9552-0085-6220 ..........7996000K921-003 9552-4741-6200 ..........7911094K927-000 9554-0085-6203 ..........7996000K911-002 9554-0085-6204 ..........7996000K911-010 9554-0085-6212 ..........7996000K051-002 9554-0085-6215 ..........7996000K051-004 9554-0085-6220 ..........7996000K051-003 E.F. Johnson P/N Delta P/N 145-0693-002 ..............7901094K003-000 145-0694-002 ..............7901031K003-000 145-0701-002 ..............7921000K821-001 145-0701-602 ..............7996000K921-002 145-0701-612 ..............7996000K051-002 M/A Com P/N Delta P/N 4851-3575-02 ..............7997000K921-002 4851-3576-02 ..............7997000K051-002 4852-3575-02 ..............7996000K921-002 4852-3576-02 ..............7996000K051-002 4857-3577-02 ..............7924000K001-001 4858-3577-02 ..............7921000K821-001 Rosenberger P/N Delta P/N 02K521-800S3..............7921000K821-001 02S521-800S3 ..............7924000K001-001 S.G. McGeary P/N Delta P/N 200-34-10-410 .............7901031K003-000 200-34-10-850 .............7901094K003-000 310-34-12-000 .............7997000K921-002 310-35-12-000 .............7996000K921-002 311-34-12-000 .............7997000K051-002 311-35-12-000 .............7996000K051-002 350-35-12-000 .............7921000K821-001 FAX ( 978 ) 922-6430 Southwest P/N Delta P/N 1011-01SF ....................7997000K051-002 1011-05SF ....................7997000K051-003 1011-11SF ....................7997000K911-002 1011-15SF ....................7997000K911-003 1012-01SF ....................7996000K051-002 1012-05SF ....................7996000K051-003 1012-11SF ....................7996000K911-002 1012-16SF ....................7996000K911-003 1013-01SF ....................7997000K921-002 1013-05SF ....................7997000K921-003 1014-01SF ....................7996000K921-002 1014-05SF ....................7996000K921-003 1020-01SF ....................7921000K821-001 1020-02SF ....................7921000K821-002 1021-01SF ....................7924000K001-001 1021-02SF ....................7924000K001-002 1030-00SF ....................7934000K001-001 1031-00SF ....................7927000K001-001 1032-00SF ....................7928000K001-001 1032-10SF ....................7926000K671-001 SV Microwave P/N Delta P/N SF1503-6103 ................7901094K003-000 SF1550-6400 ................7996000K051-002 SF1575-6007 ................7921000K821-001 SF1590-6000 ................7928000K001-000 SF1596-6000 ................7927000K001-001 SF1597-6003 ................7934000K001-001 www.deltarf.com sales@deltarf.com Delta Electronics Mfg. Corp. www.deltarf.com 978-927-1060 sales@deltarf.com PO Box 53 416 Cabot St. Beverly, MA 01915