T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD INDICATOR Part Number: L-7113BR-6.35/SGD Super Bright Green Features Description z LED firmly held by spacer-no additional fixturing or The Super Bright Green source color devices are made with glueing necessary. Gallium Phosphide Green Light Emitting Diode. z Suitable for back panel illumination, circuit board indicator, LED indicator. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE7409 REV NO: V.5 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 1 OF 6 ERP: 1102005555 Selection Guide Part No. Dice L-7113BR-6.35/SGD Super Bright Green (GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type GREEN DIFFUSED Min. Typ. 21/2 18 40 30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE7409 REV NO: V.5 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 2 OF 6 ERP: 1102005555 Super Bright Green L-7113BR-6.35/SGD SPEC NO: DSAE7409 REV NO: V.5 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 3 OF 6 ERP: 1102005555 PACKING & LABEL SPECIFICATIONS L-7113BR-6.35/SGD SPEC NO: DSAE7409 REV NO: V.5 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 4 OF 6 ERP: 1102005555 SPEC NO: DSAE7409 REV NO: V.5 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 5 OF 6 ERP: 1102005555 SPEC NO: DSAE7409 REV NO: V.5 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 6 OF 6 ERP: 1102005555