GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2003 Glenair, Inc. Printed in U.S.A.CAGE Codes 06324
E-10
Series 72
Convoluted
Tubing
E-Mail: sales@glenair.comwww.glenair.com
STYLE 2
(90° & 45°)45°
90°
.875
(22.2)
MAX
Metric dimensions (mm) are indicated in parentheses.
Tubing shown for reference only.
STRAIGHT
TUBING I.D. (Ref)
(See Table II)
E
A THREAD
(Page F-17)
STYLE 2
(STRAIGHT)
E (REF)
TYPE
A
F
G
L TYP.
DIA
J
H45°
C DIA
(Page F-17)
710-002
Non-Environmental Straight, 45° & 90° User-Installable
Connector Fittings for Series 72 Annular Convoluted Tubing
710 A A 002 M 16 20
Product Dash No.
Series (Table II)
Connector Shell Size
Designator (Table I)
(A, D, F, H, or L)
(Pages F-4 to F-6) Finish
(Table III)
Angle:
A = 90°Basic No.
B = 45°
S = Straight
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2003 Glenair, Inc. Printed in U.S.A.CAGE Codes 06324
E-11
Series 72
Convoluted
Tubing
E-Mail: sales@glenair.comwww.glenair.com
When tubing I.D. MAX exceeds inside
diameter of connector shell, style 2 will be
supplied. Refer to pages F-15 and F-16.
TABLE I
SHELL SIZE E F G H J
A,D,F,L H MAX MAX MAX MAX MAX
08 09 1.120 (28.4) .500 (12.7) 1.605 (40.8) .520 (13.2) 1.655 (42.0)
10 11 1.141 (29.0) .595 (15.1) 1.725 (43.8) .520 (13.2) 1.655 (42.0)
12 13 1.180 (30.0) .610 (15.5) 1.745 (44.3) .582 (14.8) 1.715 (43.6)
14 15 1.202 (30.5) .700 (17.8) 1.815 (46.1) .645 (16.4) 1.805 (45.8)
16 17 1.230 (31.2) .885 (22.5) 1.905 (48.4) .738 (18.7) 1.915 (48.6)
18 19 1.260 (32.0) .975 (24.8) 2.075 (52.7) .927 (23.5) 2.105 (53.5)
20 21 1.300 (33.0) .975 (24.8) 2.075 (52.7) .927 (23.5) 2.105 (53.5)
22 23 1.335 (33.9) 1.125 (28.6) 2.185 (55.5) 1.020 (25.9) 2.255 (57.3)
24 25 1.360 (34.5) 1.125 (28.6) 2.185 (55.5) 1.020 (25.9) 2.255 (57.3)
28 -- 1.435 (36.4) 1.225 (31.1) 2.355 (59.8) 1.145 (29.1) 2.305 (58.5)
32 -- 1.505 (38.2) 1.575 (40.0) 2.575 (65.4) 1.207 (30.7) 2.405 (61.1)
36 -- 1.570 (39.9) 1.775 (45.1) 2.605 (66.2) 1.238 (31.4) 2.495 (63.4)
TABLE II
DASH TUBING I.D. (REF)
NO. MIN MAX L DIA
09 .240 (6.1) .280 (7.1) .875 (22.2)
12 .330 (8.4) .370 (9.4) 1.000 (25.4)
16 .450 (11.4) .500 (12.7) 1.125 (28.6)
20 .570 (14.5) .620 (15.7) 1.250 (31.8)
24 .690 (17.5) .750 (19.1) 1.438 (36.5)
28 .810 (20.6) .870 (22.1) 1.625 (41.3)
32 .930 (23.6) 1.000 (25.4) 1.750 (44.5)
40 1.180 (30.0) 1.250 (31.8) 2.000 (50.8)
TABLE III
SYMBOL FINISH
BOlive Drab over Cadmium Plate
JGold Iridite over Cadmium Plate over Nickel
MElectroless Nickel
NOlive Drab over Cadmium Plate over Nickel
NC Zinc-Cobalt, Olive Drab
NF Olive Drab over Cadmium Plate over
Electroless Nickel (500 Hour Salt Spray)
TBright Dip Cadmium Plate over Nickel
710-002
Non-Environmental Straight, 45° & 90° User-Installable
Connector Fittings for Series 72 Annular Convoluted Tubing
