http://www.tracopower.com Page 1 of 3
DC/DC Converters
TEN 3WI Series, 3 Watt
Features
Ultra-wide 4:1 input range
Full SMD-Design
High efficiency up to 84%
Extended operating temperature
range –40°C to +85°C
Excellent load and line regulation
Indefinite short-circuit protection
I/O isolation 1500 VDC
Input filter to meet EN 55022, Class A and
FCC, level A without external components
Lead free design, fully RoHS compliant
3-year product warranty
The TEN 3WI series is a family of dc-dc converter modules with 3W output power,
featuring ultra wide 4:1 input voltage ranges of 9-36VDC or 18-75VDC. They come
in a DIP-24 plastic package with industry-standard footprint. A high efficiency up to
84% allows operation ambient temperatures of –40°C to +70°C at full load.
A built-in EMI input filter complies with EN 55022,class A without need of external
components. Further standard features include over voltage protection and conti-
nuous short circuit protection. Typical applications for these converters are battery
operated equipment and distributed power architectures in communication, instru-
mentation and industrial electronics, everywhere where isolated, tightly regulated
voltages are required
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 3-2410WI 3.3 VDC 750 mA 75 %
TEN 3-2411WI 5 VDC 600 mA 79 %
TEN 3-2412WI 9 – 36 VDC 12 VDC 250 mA 81 %
TEN 3-2413WI (24 VDC nominal) 15 VDC 200 mA 82 %
TEN 3-2422WI ±12 VDC ±125 mA 80 %
TEN 3-2423WI ±15 VDC ±100 mA 80 %
TEN 3-4810WI 3.3 VDC 750 mA 76 %
TEN 3-4811WI 5 VDC 600 mA 80 %
TEN 3-4812WI 18 – 75 VDC 12 VDC 250 mA 83 %
TEN 3-4813WI (48 VDC nominal) 15 VDC 200 mA 84 %
TEN 3-4822WI ±12 VDC ±125 mA 82 %
TEN 3-4823WI ±15 VDC ±100 mA 82 %
Models
UL 60950 -1
C B
Scheme
IEC 60950 -1
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TEN 3WI Series 3 Watt
Input Specifications
Input current no load /full load 24 Vin models 20 mA typ. / 150 mA typ.
48 Vin models 10 mA typ. / 75 mA typ.
Start-up voltage / 24 Vin models 9 VDC / 8.5 VDC typ.
under voltage shut down 48 Vin models 18 VDC / 16 VDC typ.
Surge voltage (1 sec. max.) 24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection 0.5 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy ±2.0 % max.
Regulation – Input variation Vin min. to Vin max. 1.0 % max.
– Load variation 10 – 100 %
single output models 1.0 % max.
dual output models 3.0 % max. (balanced load)
Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max
Temperature coefficient 0.02 %/K
Current limitation >110 % of Iout max., constant current
Transient response (25% load step change) 300 µs typ.
Short circuit protection indefinite (automatic recovery)
Capacitive load 3.3 VDC models 680 µF max.
5 VDC models 470 µF max.
12 VDC models 330 µF max.
12 VDC models 220 µF max.
±12 VDC models 150 µF max. (for each output)
±15 VDC models 100 µF max. (for each output)
General Specifications
Temperature ranges Operating 40°C to +85°C
– Casing +100°C max.
– Storage 55°C to +125°C
Derating 3.5 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h
Isolation voltage (60 sec.) – Input/Output 1500 VDC
Isolation capacitance – Input/Output 380 pF typ
Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 350 kHz typ. (Pulse width modulation PWM)
Safety standards UL 60950-1 , IEC/EN 60950-1
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TEN 3WI Series 3 Watt
Physical Specifications
Casing material non conductive black plastic
Potting material epoxy (UL94V-0 rated)
Weight 12 g (0.42 oz)
Soldering temperature max. 265°C / 10 sec.
Outline Dimensions mm (inches)
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (±0.02)
Pin Single Dual
2–Vin (GND) –Vin (GND)
3–Vin (GND) –Vin (GND)
9No pin Common
11 No function –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. July 24, 2018
5.0
(0.2)
4.5 ±0.5 22.86 (0.9)
2.54
32 ±0.5 (1.25
±0.02)
10.2 ±0.5
(0.4
±0.02)
911
2223
23
16 14
Bottom view
15.24 (0.6) 5.08
(0.18
±0.02)
(0.1) (0.2)
2.4
(0.094)
15 .24 (0.6)
20.0 (0.787)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TRACO Power:
TEN 3-2411WI TEN 3-4812WI TEN 3-2422WI TEN 3-4813WI TEN 3-2410WI TEN 3-2412WI TEN 3-4822WI TEN
3-4823WI TEN 3-2423WI TEN 3-4810WI TEN 3-2413WI TEN 3-4811WI