United Kingdom
Weidmüller Ltd.
1 Abbey Wood Road, Kings Hill
West Malling, Kent ME19 4YT
Phone +44 1732 877032
Fax +44 1732 873873
info@weidmuller.co.uk
http://www.weidmueller.com
USA
Weidmüller Inc.
821 Southlake Boulevard
Richmond, Virginia 23236
Phone +1 804 7942877
Fax +1 804 3792593
info@weidmuller.com
http://www.weidmuller.com
Other countries
Weidmüller Interface GmbH & Co. KG
Postfach 3030
32720 Detmold
Phone +49 5231 14-0
Fax +49 5231 14-20 83
info@weidmueller.com
http://www.weidmueller.com
INNOVATION
Data Sheet • PCB-Components
PCB pin headers for the SMT process
SL-SMT 5.00/5.08
SL-SMT 5.00/5.08 are the high
temperature resistant pin headers
for the Omnimate Range specially
developed to be compatible with reflow
production processes. Existing pcb
connector headers cannot withstand
the high temperatures experienced in
reflow soldering - up to 260 °C.
The SL-SMT has been designed using
LCP (Liquid Crystal Polymer) which is
stable at these high temperatures.
•up to 30% reduction of production
costs
•stable at 260 °C - compatible for
all reflow soldering processes
•Through-Hole-Reflow pins gives
10x greater strength than
“Gull Wing” SMT pins
•shorter pins enable double-sided
placement
•Tape-on-Reel or Tray packaging for
automatic “Pick-and-Place”
2
Technical data / Derating curves Omnimate Range - Pitch 5.00/5.08 mm
For the mounting of PCBs, it should be noted that the rated data given in the catalogue relate only to the connection elements.
The necessary creepage and clearance paths must be observed in connection with the respective applicant in accordance to
VDE 0110. The current-carrying capacity is to be determined according to DIN IEC 326 part 3.
Weidmueller connectors are tested according to the DIN VDE 0627 standard, and are valid for its field of applications. Provided
that the connectors are used for the intended purpose, all requirements with respect to the occuring of electrical, mechanical,
thermic and corrosive stress will be satisfied.
Materials
Insulation material
Colour
Operating temperature with BLZ 5.00/5.08 °C
Flammability class. UL94
Contact base material
Contact plating 2)
System characteristic values
Pitch mm
Connection method
Processing method
Solder pin length mm
PCB hole diameter Ømm
Insulation resistance MΩ
Through resistance mΩ
Tor que Nm
Solder heat resistance accord. to EN 61760-1 °C/sec.
Conductor size
Clamping range mm2
“e” solid H05(07) V-U mm2
“ f ” flexible H05(07) V-K mm2
“ f ”with ferrule to DIN 46228/1 mm2
… with plastic collar to DIN 46228/4 mm2
VDE 0110 4.97 rated data
Rated cross-section mm2
Rated current 3) A
Overvoltage category / Pollution severity
Rated voltage V
Impulse voltage kV
UL rated data
Rated voltage, industrial V~
Rated current A
AWG conductor (field wiring)
CSA rated data
Rated voltage, industrial V~
Rated current A
AWG conductor (field wiring)
Application notes
2) gold-plated contact plating on request
3) referred to 20°C ambient temperature,
rated cross-section and max. poles in connection
with BLZ 5.00 resp. BLZ 5.08
16) additional solder pin lengths on request
17) see chapter SL-SMT “Design recommendations”
19) from 9 poles on 1.5+0.1 recommended
LCP, halogen-free
black
-20…+100
V-0
CuSn
tin-plated
5,00 / 5,08
Through-Hole solder
Reflow solder
1.5-0.3 16)
1.4+0.1 17) 19)
≥106
≤4.2
–
290/30 (class A)
–
–
–
–
–
–
15
III/3 III/2 II/2
250 320 400
4.0 4.0 4.0
300
10
–
300
10
–
In addition, convential assembly of pcb modules requires both reflow soldering for the SMT (Surface-Mount-Technology) components and then wave
soldering for standard THT (Through-Hole-Technology) components. With the SL-SMT, which uses THR (Through-Hole-Technology), the wave solder
operation is not needed. The shorter THR solder pins offer the flexibility of SMT components but achieve a mechanical strength of 10x that of SMT
components (e.g. “gull wing”). This additional strength is of great importance for pcb connectors where connection operations put strain onto standard
SMT solder joints. The SL-SMT is not only suitable for the latest soldering techniques, it has also been designed to be compatible with standard
automatic “Pick-and-Place” machines. “Tape-on-Reel” and “Tray” packaging enable fully automatic component placement of the 90° (horizontal) and
180° (vertical) pin headers. These products are available in the standard open-ended, closed-ended and flanged versions, and mate with any of the
female socket connectors in our “Omnimate Range” of 5.00 or 5.08 mm pitch.
SL-SMT 5.08 + BLZ 5.08
Conductor H05V-K0.5
SL-SMT 5.08 + BLZ 5.08
Conductor H07V-K2.5
smallest pole
number (2 poles)
smallest pole
number (2 poles)
largest pole number
(24 poles)
largest pole number
(24 poles)
conductor current accord. to
EN 60947-7-1/1991 table V
conductor current accord. to
EN 60947-7-1/1991 table V
Ambient temperature T (°C)
Ambient temperature T (°C)
Current loading I (A)
Current loading I (A)
SL-SMT 5.00 + BLZ 5.00
Conductor H05V-K0.5
SL-SMT 5.00 + BLZ 5.00
Conductor H07V-K2.5
Ambient temperature T (°C)
Ambient temperature T (°C)
Current loading I (A) Current loading I (A)
smallest pole
number (2 poles)
smallest pole
number (2 poles)
conductor current accord. to
EN 60947-7-1/1991 table V
conductor current accord. to
EN 60947-7-1/1991 table V
largest pole number
(24 poles)
largest pole number
(24 poles)
Machine oriented packaging
3
“Tape-on-Reel” Reel dimensions and position of pin headers
The pin headers for the 90° and 180° versions
of the SL-SMT 5.00/5.08 are available in
“Tape-on-Reel” for automatic component
placement.
The reels are anti-static, have a diameter of
330 mm, and are designed for all conventionally
available feeders.
The tapes used conform to the standard
IEC 60286-3 and are made of anti-static,
black polystyrene. The tape is covered with
a protective foil.
A high temperature resistant Pick-and-Place
pad is located in the middle of the pin headers
for automatic gripping of the straight pin
headers SL-SMT 5.00/180° and
SL-SMT 5.08/180°. This Pick-and-Place pad is
included in the “Tape-on-Reel” packaging.
The angled SL-SMT 5.00/90° and
SL-SMT 5.08/90° pin headers are positioned
so that no Pick-and-Place pad is needed for
automatic gripping.
Feed direction
Feed direction
even pole numbers uneven pole numbers
pin header is reversed
even pole numbers uneven pole numbers
pin header is reversed
4
Machine oriented packaging SL-SMT 5.08
The trays are adapted to the pin headers
SL-SMT 5.08 and are based on the standard
EN 60286-5. The tray material consists of black
anti-static polystyrene. For transport, the trays
are covered with a transparent foil.
A high temperature resistant Pick-and-Place
pad is placed in the middle of the pin header
for automatic gripping of the straight pin header
SL-SMT 5.08/180° using a vacuum pipette.
This pad is included in the tray packaging.
The angled pin header SL-SMT 5.08/90° is
conceived to ensure that no Pick-and-Place
pad is needed for automatic gripping.
The optimum positioning points for the vacuum pipette depend on the length of the connectors
(open, closed or flange). In the tray drawing, we have marked these points with Start X and
Step X for the X axis with reference to the example of an SL-SMT 5.08/12/90 without a flange.
The following tables indicates the dimensions for the X and Y axes for the different pole numbers
and versions.
“Tray”
X-values 90°
Poles Start X/mm1) Step X/mm Number Step X
–– – –
– – – –
424.30 25.40 10
526.80 30.48 8
629.40 35.56 7
731.90 40.64 6
834.40 45.72 5
937.00 50.80 4
10 39.50 55.88 4
11 42.10 60.96 3
12 44.60 66.04 3
13 47.10 71.12 3
14 49.70 76.20 2
15 52.20 81.28 2
16 54.80 86.36 2
17 57.30 91.44 2
18 59.80 96.52 1
19 62.40 101.60 1
20 64.90 106.68 1
21 67.50 111,76 1
22 70.00 116.84 1
23 72.50 121.92 1
24 75.10 127.00 1
Y-values 90°
Start Y/mm1) Step Y/mm Number Step Y
20.30 20.00 5
X-values 180°
Poles Start X/mm1) Step X/mm Number Step X
–– – –
– – – –
419.80 25.40 10
522.30 30.48 8
624.80 35.56 7
727.40 40.64 6
829.90 45.72 5
932.50 50.80 4
10 35.00 55.88 4
11 37.50 60.96 3
12 40.10 66.04 3
13 42.60 71.12 3
14 45.20 76.20 2
15 47.70 81.28 2
16 50.20 86.36 2
17 52.80 91.44 2
18 55.30 96.52 1
19 57.90 101.60 1
20 60.40 106.68 1
21 62.90 111.76 1
22 65.50 116.84 1
23 68.00 121.92 1
24 70.60 127.00 1
Y-values 180°
Start Y/mm1) Step Y/mm Number Step Y
18.00 20.00 5
1) The start values are only reference values and must be
re-checked when automatic placement machine is set-up!
X-values 90°
Poles Start X/mm1) Step X/mm Number Step X
224.30 25.40 10
326.80 30.48 8
429.40 35.56 7
531.90 40.64 6
634.40 45.72 5
737.00 50.80 4
839.50 55.88 4
942.10 60.96 3
10 44.60 66.04 3
11 47.10 71.12 3
12 49.70 76.20 2
13 52.20 81.28 2
14 54.80 86.36 2
15 57.30 91.44 2
16 59.80 96.52 1
17 62.40 101.60 1
18 64.90 106.68 1
19 67.50 111,76 1
20 70.00 116.84 1
21 72.50 121.92 1
22 75.10 127.00 1
23 77.60 132.08 1
24 80.20 137.16 1
Y-values 90°
Start Y/mm1) Step Y/mm Number Step Y
20.30 20.00 5
X-values 180°
Poles Start X/mm1) Step X/mm Number Step X
219.80 25.40 10
3 22.30 30.48 8
424.80 35.56 7
527.40 40.64 6
629.90 45.72 5
732.50 50.80 4
835.00 55.88 4
937.50 60.96 3
10 40.10 66.04 3
11 42.60 71.12 3
12 45.20 76.20 2
13 47.70 81.28 2
14 50.20 86.36 2
15 52.80 91.44 2
16 55.30 96.52 1
17 57.90 101.60 1
18 60.40 106.68 1
19 62.90 111.76 1
20 65.50 116.84 1
21 68.00 121.92 1
22 70.60 127.00 1
23 73.10 132.08 1
24 75.60 137.16 1
Y-values 180°
Start Y/mm1) Step Y/mm Number Step Y
18.00 20.00 5
1) The start values are only reference values and must be
re-checked when automatic placement machine is set-up!
Tray dimensions SL-SMT 5.08/90° and 180°
open and closed version
Tray dimensions SL-SMT 5.08/90° and 180°
flange version
Machine oriented packaging SL-SMT 5.08
5
Tray dimensions and position of pin headers SL-SMT 5.08
User preparation of the SL-SMT 5.08 in the “Tray”
For user preparation of the SL-SMT 5.08 in the “Tray”, we also offer all components separately.
Empty tray
Type Description Cat. No. Qty.
Tray SL-SMT 5.08/90 for SL-SMT 5.08/4…24/90, SL-SMT 5.08/4…24/90G and SL-SMT 5.08/2…24/90LF 1774640000 1
Tray SL-SMT 5.08/180 for SL-SMT 5.08/4…24/180 , SL-SMT 5.08/4…24/180G and SL-SMT 5.08/2…24/180LF 1774650000 1
PPP-SL-SMT 5.08/180 Pick-and-Place-Pad for SL-SMT 5.08/2…24/180 (open, closed and flange version) 1774680000 100
“Tray”
even pole numbers
even pole numbers
uneven pole numbers
uneven pole numbers
6
Omnimate Range - Pitch 5.00 mm
Pin headers SL-SMT 5.00/90 Pin headers SL-SMT 5.00/90G
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/90 1797620000 250
3SL-SMT 5.00/3/90 1797630000 250
4SL-SMT 5.00/4/90 1797640000 250
5SL-SMT 5.00/5/90 1797650000 250
6SL-SMT 5.00/6/90 1797660000 250
7SL-SMT 5.00/7/90 1797670000 250
8SL-SMT 5.00/8/90 1797680000 250
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/90 1796930000 100
3SL-SMT 5.00/3/90 1796940000 100
4SL-SMT 5.00/4/90 1796950000 100
5SL-SMT 5.00/5/90 1796960000 50
6SL-SMT 5.00/6/90 1796970000 50
7SL-SMT 5.00/7/90 1796980000 50
8SL-SMT 5.00/8/90 1796990000 50
9SL-SMT 5.00/9/90 1797000000 50
10 SL-SMT 5.00/10/90 1797010000 50
11 SL-SMT 5.00/11/90 1797020000 50
12 SL-SMT 5.00/12/90 1797030000 50
13 SL-SMT 5.00/13/90 1797040000 50
14 SL-SMT 5.00/14/90 1797050000 50
15 SL-SMT 5.00/15/90 1797060000 50
16 SL-SMT 5.00/16/90 1797070000 50
Additional pole numbers on request.
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/90G 1797690000 250
3SL-SMT 5.00/3/90G 1797700000 250
4SL-SMT 5.00/4/90G 1797710000 250
5SL-SMT 5.00/5/90G 1797720000 250
6SL-SMT 5.00/6/90G 1797730000 250
7SL-SMT 5.00/7/90G 1797740000 250
Additional pole numbers and tape widths on request.
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
7
Omnimate Range - Pitch 5.00 mm
Pin headers SL-SMT 5.00/90G Pin headers SL-SMT 5.00/90LF
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/90G 1797080000 100
3SL-SMT 5.00/3/90G 1797090000 100
4SL-SMT 5.00/4/90G 1797100000 100
5SL-SMT 5.00/5/90G 1797110000 50
6SL-SMT 5.00/6/90G 1797120000 50
7SL-SMT 5.00/7/90G 1797130000 50
8SL-SMT 5.00/8/90G 1797140000 36
9SL-SMT 5.00/9/90G 1797150000 50
10 SL-SMT 5.00/10/90G 1797160000 50
11 SL-SMT 5.00/11/90G 1797170000 50
12 SL-SMT 5.00/12/90G 1797180000 50
13 SL-SMT 5.00/13/90G 1797190000 50
14 SL-SMT 5.00/14/90G 1797200000 50
15 SL-SMT 5.00/15/90G 1797210000 50
16 SL-SMT 5.00/16/90G 1797220000 50
Additional pole numbers on request.
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/90LF 1797750000 250
3SL-SMT 5.00/3/90LF 1797760000 250
4SL-SMT 5.00/4/90LF 1797770000 250
5SL-SMT 5.00/5/90LF 1797780000 250
6SL-SMT 5.00/6/90LF 1797790000 250
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/90LF 1797230000 100
3SL-SMT 5.00/3/90LF 1797240000 100
4SL-SMT 5.00/4/90LF 1797250000 100
5SL-SMT 5.00/5/90LF 1797260000 50
6SL-SMT 5.00/6/90LF 1797270000 50
7SL-SMT 5.00/7/90LF 1797280000 50
8SL-SMT 5.00/8/90LF 1797290000 50
9SL-SMT 5.00/9/90LF 1797300000 50
10 SL-SMT 5.00/10/90LF 1797310000 50
11 SL-SMT 5.00/11/90LF 1797320000 50
12 SL-SMT 5.00/12/90LF 1797330000 50
13 SL-SMT 5.00/13/90LF 1797340000 50
14 SL-SMT 5.00/14/90LF 1797350000 50
15 SL-SMT 5.00/15/90LF 1797360000 50
16 SL-SMT 5.00/16/90LF 1797370000 50
Additional pole numbers on request.
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous 205
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
=
+
=
Ø
Ø
8
Omnimate Range - Pitch 5.00 mm
Pin headers SL-SMT 5.00/180 Pin headers SL-SMT 5.00/180G
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/180 1797800000 200
3SL-SMT 5.00/3/180 1797810000 200
4SL-SMT 5.00/4/180 1797820000 200
5SL-SMT 5.00/5/180 1797830000 200
6SL-SMT 5.00/6/180 1797840000 200
7SL-SMT 5.00/7/180 1797850000 200
8SL-SMT 5.00/8/180 1797860000 200
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/180 1796480000 100
3SL-SMT 5.00/3/180 1796490000 100
4SL-SMT 5.00/4/180 1796500000 100
5SL-SMT 5.00/5/180 1796510000 50
6SL-SMT 5.00/6/180 1796520000 50
7SL-SMT 5.00/7/180 1796530000 50
8SL-SMT 5.00/8/180 1796540000 50
9SL-SMT 5.00/9/180 1796550000 50
10 SL-SMT 5.00/10/180 1796560000 50
11 SL-SMT 5.00/11/180 1796570000 50
12 SL-SMT 5.00/12/180 1796580000 50
13 SL-SMT 5.00/13/180 1796590000 50
14 SL-SMT 5.00/14/180 1796600000 50
15 SL-SMT 5.00/15/180 1796610000 50
16 SL-SMT 5.00/16/180 1796620000 50
Additional pole numbers on request.
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/180G 1797870000 200
3SL-SMT 5.00/3/180G 1797880000 200
4SL-SMT 5.00/4/180G 1797890000 200
5SL-SMT 5.00/5/180G 1797900000 200
6SL-SMT 5.00/6/180G 1797910000 200
7SL-SMT 5.00/7/180G 1797920000 200
Additional pole numbers and tape widths on request.
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
9
Omnimate Range - Pitch 5.00 mm
Pin headers SL-SMT 5.00/180G Pin headers SL-SMT 5.00/180LF
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/180G 1796630000 100
3SL-SMT 5.00/3/180G 1796640000 100
4SL-SMT 5.00/4/180G 1796650000 100
5SL-SMT 5.00/5/180G 1796660000 50
6SL-SMT 5.00/6/180G 1796670000 50
7SL-SMT 5.00/7/180G 1796680000 50
8SL-SMT 5.00/8/180G 1796690000 50
9SL-SMT 5.00/9/180G 1796700000 50
10 SL-SMT 5.00/10/180G 1796710000 50
11 SL-SMT 5.00/11/180G 1796720000 50
12 SL-SMT 5.00/12/180G 1796730000 50
13 SL-SMT 5.00/13/180G 1796740000 50
14 SL-SMT 5.00/14/180G 1796750000 50
15 SL-SMT 5.00/15/180G 1796760000 50
16 SL-SMT 5.00/16/180G 1796770000 50
Additional pole numbers on request.
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/180LF 1797930000 200
3SL-SMT 5.00/3/180LF 1797940000 200
4SL-SMT 5.00/4/180LF 1797950000 200
5SL-SMT 5.00/5/180LF 1797960000 200
6SL-SMT 5.00/6/180LF 1797970000 200
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.00/2/180LF 1796780000 100
3SL-SMT 5.00/3/180LF 1796790000 100
4SL-SMT 5.00/4/180LF 1796800000 100
5SL-SMT 5.00/5/180LF 1796810000 50
6SL-SMT 5.00/6/180LF 1796820000 50
7SL-SMT 5.00/7/180LF 1796830000 50
8SL-SMT 5.00/8/180LF 1796840000 50
9SL-SMT 5.00/9/180LF 1796850000 50
10 SL-SMT 5.00/10/180LF 1796860000 50
11 SL-SMT 5.00/11/180LF 1796870000 50
12 SL-SMT 5.00/12/180LF 1796880000 50
13 SL-SMT 5.00/13/180LF 1796890000 50
14 SL-SMT 5.00/14/180LF 1796900000 50
15 SL-SMT 5.00/15/180LF 1796910000 50
16 SL-SMT 5.00/16/180LF 1796920000 50
Additional pole numbers on request.
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous –
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
Ø
10
xyzljsdöaklsdOmnimate Range - Pitch 5.08 mm
Pin headers SL-SMT 5.08/90
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90 1774764001 250
3SL-SMT 5.08/3/90 1774774001 250
4SL-SMT 5.08/4/90 1774784001 250
5SL-SMT 5.08/5/90 1774794001 250
6SL-SMT 5.08/6/90 1774804001 250
7SL-SMT 5.08/7/90 1774814001 250
8SL-SMT 5.08/8/90 1774824001 250
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Tray
Colour: Black
Poles Type Cat. No. Qty.
–– – –
–– – –
4SL-SMT 5.08/4/90 1774783001 66
5SL-SMT 5.08/5/90 1774793001 54
6SL-SMT 5.08/6/90 1774803001 48
7SL-SMT 5.08/7/90 1774813001 42
8SL-SMT 5.08/8/90 1774823001 36
9SL-SMT 5.08/9/90 1774833001 30
10 SL-SMT 5.08/10/90 1774843001 30
11 SL-SMT 5.08/11/90 1774853001 24
12 SL-SMT 5.08/12/90 1774863001 24
13 SL-SMT 5.08/13/90 1774873001 24
14 SL-SMT 5.08/14/90 1774883001 18
15 SL-SMT 5.08/15/90 1774893001 18
16 SL-SMT 5.08/16/90 1774903001 18
17 SL-SMT 5.08/17/90 1774913001 18
18 SL-SMT 5.08/18/90 1774923001 18
19 SL-SMT 5.08/19/90 1774933001 12
20 SL-SMT 5.08/20/90 1774943001 12
21 SL-SMT 5.08/21/90 1774953001 12
22 SL-SMT 5.08/22/90 1774963001 12
23 SL-SMT 5.08/23/90 1774973001 12
24 SL-SMT 5.08/24/90 1774983001 12
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90 1774762001 100
3SL-SMT 5.08/3/90 1774772001 100
4SL-SMT 5.08/4/90 1774782001 100
5SL-SMT 5.08/5/90 1774792001 50
6SL-SMT 5.08/6/90 1774802001 50
7SL-SMT 5.08/7/90 1774812001 50
8SL-SMT 5.08/8/90 1774822001 50
9SL-SMT 5.08/9/90 1774832001 50
10 SL-SMT 5.08/10/90 1774842001 50
11 SL-SMT 5.08/11/90 1774852001 50
12 SL-SMT 5.08/12/90 1774862001 50
13 SL-SMT 5.08/13/90 1774872001 50
14 SL-SMT 5.08/14/90 1774882001 50
15 SL-SMT 5.08/15/90 1774892001 50
16 SL-SMT 5.08/16/90 1774902001 50
17 SL-SMT 5.08/17/90 1774912001 20
18 SL-SMT 5.08/18/90 1774922001 20
19 SL-SMT 5.08/19/90 1774932001 20
20 SL-SMT 5.08/20/90 1774942001 20
21 SL-SMT 5.08/21/90 1774952001 20
22 SL-SMT 5.08/22/90 1774962001 20
23 SL-SMT 5.08/23/90 1774972001 20
24 SL-SMT 5.08/24/90 1774982001 20
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
11
xyzljsdöaklsdOmnimate Range - Pitch 5.08 mm
Pin headers SL-SMT 5.08/90G
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90G 1775004001 250
3SL-SMT 5.08/3/90G 1775014001 250
4SL-SMT 5.08/4/90G 1775024001 250
5SL-SMT 5.08/5/90G 1775034001 250
6SL-SMT 5.08/6/90G 1775044001 250
7SL-SMT 5.08/7/90G 1775054001 250
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Tray
Colour: Black
Poles Type Cat. No. Qty.
–– – –
–– – –
4SL-SMT 5.08/4/90G 1775023001 66
5SL-SMT 5.08/5/90G 1775033001 54
6SL-SMT 5.08/6/90G 1775043001 48
7SL-SMT 5.08/7/90G 1775053001 42
8SL-SMT 5.08/8/90G 1775063001 36
9SL-SMT 5.08/9/90G 1775073001 30
10 SL-SMT 5.08/10/90G 1775083001 30
11 SL-SMT 5.08/11/90G 1775093001 24
12 SL-SMT 5.08/12/90G 1775103001 24
13 SL-SMT 5.08/13/90G 1775113001 24
14 SL-SMT 5.08/14/90G 1775123001 18
15 SL-SMT 5.08/15/90G 1775133001 18
16 SL-SMT 5.08/16/90G 1775143001 18
17 SL-SMT 5.08/17/90G 1775153001 18
18 SL-SMT 5.08/18/90G 1775163001 18
19 SL-SMT 5.08/19/90G 1775173001 12
20 SL-SMT 5.08/20/90G 1775183001 12
21 SL-SMT 5.08/21/90G 1775193001 12
22 SL-SMT 5.08/22/90G 1775203001 12
23 SL-SMT 5.08/23/90G 1775213001 12
24 SL-SMT 5.08/24/90G 1775223001 12
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90G 1775002001 100
3SL-SMT 5.08/3/90G 1775012001 100
4SL-SMT 5.08/4/90G 1775022001 100
5SL-SMT 5.08/5/90G 1775032001 50
6SL-SMT 5.08/6/90G 1775042001 50
7SL-SMT 5.08/7/90G 1775052001 50
8SL-SMT 5.08/8/90G 1775062001 36
9SL-SMT 5.08/9/90G 1775072001 50
10 SL-SMT 5.08/10/90G 1775082001 50
11 SL-SMT 5.08/11/90G 1775092001 50
12 SL-SMT 5.08/12/90G 1775102001 50
13 SL-SMT 5.08/13/90G 1775112001 50
14 SL-SMT 5.08/14/90G 1775122001 50
15 SL-SMT 5.08/15/90G 1775132001 50
16 SL-SMT 5.08/16/90G 1775142001 50
17 SL-SMT 5.08/17/90G 1775152001 20
18 SL-SMT 5.08/18/90G 1775162001 20
19 SL-SMT 5.08/19/90G 1775172001 20
20 SL-SMT 5.08/20/90G 1775182001 20
21 SL-SMT 5.08/21/90G 1775192001 20
22 SL-SMT 5.08/22/90G 1775202001 20
23 SL-SMT 5.08/23/90G 1775212001 20
24 SL-SMT 5.08/24/90G 1775222001 20
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous 205
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
12
xyzljsdöaklsdOmnimate Range - Pitch 5.08 mm
Pin headers SL-SMT 5.08/90LF
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90LF 1775234001 250
3SL-SMT 5.08/3/90LF 1775244001 250
4SL-SMT 5.08/4/90LF 1775254001 250
5SL-SMT 5.08/5/90LF 1775264001 250
6SL-SMT 5.08/6/90LF 1775274001 250
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Tray
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90LF 1775233001 66
3SL-SMT 5.08/3/90LF 1775243001 54
4SL-SMT 5.08/4/90LF 1775253001 48
5SL-SMT 5.08/5/90LF 1775263001 42
6SL-SMT 5.08/6/90LF 1775273001 36
7SL-SMT 5.08/7/90LF 1775283001 30
8SL-SMT 5.08/8/90LF 1775293001 30
9SL-SMT 5.08/9/90LF 1775303001 24
10 SL-SMT 5.08/10/90LF 1775313001 24
11 SL-SMT 5.08/11/90LF 1775323001 24
12 SL-SMT 5.08/12/90LF 1775333001 18
13 SL-SMT 5.08/13/90LF 1775343001 18
14 SL-SMT 5.08/14/90LF 1775353001 18
15 SL-SMT 5.08/15/90LF 1775363001 18
16 SL-SMT 5.08/16/90LF 1775373001 12
17 SL-SMT 5.08/17/90LF 1775383001 12
18 SL-SMT 5.08/18/90LF 1775393001 12
19 SL-SMT 5.08/19/90LF 1775403001 12
20 SL-SMT 5.08/20/90LF 1775413001 12
21 SL-SMT 5.08/21/90LF 1775423001 12
22 SL-SMT 5.08/22/90LF 1775433001 12
23 SL-SMT 5.08/23/90LF 1775443001 12
24 SL-SMT 5.08/24/90LF 1775453001 12
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/90LF 1775232001 100
3SL-SMT 5.08/3/90LF 1775242001 100
4SL-SMT 5.08/4/90LF 1775252001 100
5SL-SMT 5.08/5/90LF 1775262001 50
6SL-SMT 5.08/6/90LF 1775272001 50
7SL-SMT 5.08/7/90LF 1775282001 50
8SL-SMT 5.08/8/90LF 1775292001 50
9SL-SMT 5.08/9/90LF 1775302001 50
10 SL-SMT 5.08/10/90LF 1775312001 50
11 SL-SMT 5.08/11/90LF 1775322001 50
12 SL-SMT 5.08/12/90LF 1775332001 50
13 SL-SMT 5.08/13/90LF 1775342001 50
14 SL-SMT 5.08/14/90LF 1775352001 50
15 SL-SMT 5.08/15/90LF 1775362001 50
16 SL-SMT 5.08/16/90LF 1775372001 50
17 SL-SMT 5.08/17/90LF 1775382001 20
18 SL-SMT 5.08/18/90LF 1775392001 20
19 SL-SMT 5.08/19/90LF 1775402001 20
20 SL-SMT 5.08/20/90LF 1775412001 20
21 SL-SMT 5.08/21/90LF 1775422001 20
22 SL-SMT 5.08/22/90LF 1775432001 20
23 SL-SMT 5.08/23/90LF 1775442001 20
24 SL-SMT 5.08/24/90LF 1775452001 20
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous 205
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous 205
=
+
=
Ø
Ø
13
xyzljsdöaklsdOmnimate Range - Pitch 5.08 mm
Pin headers SL-SMT 5.08/180
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180 1775524001 200
3SL-SMT 5.08/3/180 1775574001 200
4SL-SMT 5.08/4/180 1775594001 200
5SL-SMT 5.08/5/180 1775634001 200
6SL-SMT 5.08/6/180 1775644001 200
7SL-SMT 5.08/7/180 1775654001 200
8SL-SMT 5.08/8/180 1775664001 200
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Tray
Colour: Black
Poles Type Cat. No. Qty.
–– – –
–– – –
4SL-SMT 5.08/4/180 1775593001 66
5SL-SMT 5.08/5/180 1775633001 54
6SL-SMT 5.08/6/180 1775643001 48
7SL-SMT 5.08/7/180 1775653001 42
8SL-SMT 5.08/8/180 1775663001 36
9SL-SMT 5.08/9/180 1775673001 30
10 SL-SMT 5.08/10/180 1775683001 30
11 SL-SMT 5.08/11/180 1775693001 24
12 SL-SMT 5.08/12/180 1775703001 24
13 SL-SMT 5.08/13/180 1775713001 24
14 SL-SMT 5.08/14/180 1775723001 18
15 SL-SMT 5.08/15/180 1775733001 18
16 SL-SMT 5.08/16/180 1775743001 18
17 SL-SMT 5.08/17/180 1775753001 18
18 SL-SMT 5.08/18/180 1775763001 12
19 SL-SMT 5.08/19/180 1775773001 12
20 SL-SMT 5.08/20/180 1775783001 12
21 SL-SMT 5.08/21/180 1775793001 12
22 SL-SMT 5.08/22/180 1775803001 12
23 SL-SMT 5.08/23/180 1775813001 12
24 SL-SMT 5.08/24/180 1775823001 12
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180 1775522001 100
3SL-SMT 5.08/3/180 1775572001 100
4SL-SMT 5.08/4/180 1775592001 100
5SL-SMT 5.08/5/180 1775632001 50
6SL-SMT 5.08/6/180 1775642001 50
7SL-SMT 5.08/7/180 1775652001 50
8SL-SMT 5.08/8/180 1775662001 50
9SL-SMT 5.08/9/180 1775672001 50
10 SL-SMT 5.08/10/180 1775682001 50
11 SL-SMT 5.08/11/180 1775692001 50
12 SL-SMT 5.08/12/180 1775702001 50
13 SL-SMT 5.08/13/180 1775712001 50
14 SL-SMT 5.08/14/180 1775722001 50
15 SL-SMT 5.08/15/180 1775732001 50
16 SL-SMT 5.08/16/180 1775742001 50
17 SL-SMT 5.08/17/180 1775752001 20
18 SL-SMT 5.08/18/180 1775762001 20
19 SL-SMT 5.08/19/180 1775772001 20
20 SL-SMT 5.08/20/180 1775782001 20
21 SL-SMT 5.08/21/180 1775792001 20
22 SL-SMT 5.08/22/180 1775802001 20
23 SL-SMT 5.08/23/180 1775812001 20
24 SL-SMT 5.08/24/180 1775822001 20
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
14
xyzljsdöaklsdOmnimate Range - Pitch 5.08 mm
Pin headers SL-SMT 5.08/180G
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180G 1775924001 200
3SL-SMT 5.08/3/180G 1775934001 200
4SL-SMT 5.08/4/180G 1775944001 200
5SL-SMT 5.08/5/180G 1775954001 200
6SL-SMT 5.08/6/180G 1775964001 200
7SL-SMT 5.08/7/180G 1775974001 200
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Tray
Colour: Black
Poles Type Cat. No. Qty.
–– – –
–– – –
4SL-SMT 5.08/4/180G 1775943001 66
5SL-SMT 5.08/5/180G 1775953001 54
6SL-SMT 5.08/6/180G 1775963001 48
7SL-SMT 5.08/7/180G 1775973001 42
8SL-SMT 5.08/8/180G 1775983001 36
9SL-SMT 5.08/9/180G 1775993001 30
10 SL-SMT 5.08/10/180G 1776003001 30
11 SL-SMT 5.08/11/180G 1776013001 24
12 SL-SMT 5.08/12/180G 1776023001 24
13 SL-SMT 5.08/13/180G 1776243001 24
14 SL-SMT 5.08/14/180G 1776253001 18
15 SL-SMT 5.08/15/180G 1776263001 18
16 SL-SMT 5.08/16/180G 1776273001 18
17 SL-SMT 5.08/17/180G 1776283001 18
18 SL-SMT 5.08/18/180G 1776293001 12
19 SL-SMT 5.08/19/180G 1776303001 12
20 SL-SMT 5.08/20/180G 1776313001 12
21 SL-SMT 5.08/21/180G 1776323001 12
22 SL-SMT 5.08/22/180G 1776333001 12
23 SL-SMT 5.08/23/180G 1776343001 12
24 SL-SMT 5.08/24/180G 1776353001 12
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180G 1775922001 100
3SL-SMT 5.08/3/180G 1775932001 100
4SL-SMT 5.08/4/180G 1775942001 100
5SL-SMT 5.08/5/180G 1775952001 50
6SL-SMT 5.08/6/180G 1775962001 50
7SL-SMT 5.08/7/180G 1775972001 50
8SL-SMT 5.08/8/180G 1775982001 50
9SL-SMT 5.08/9/180G 1775992001 50
10 SL-SMT 5.08/10/180G 1776002001 50
11 SL-SMT 5.08/11/180G 1776012001 50
12 SL-SMT 5.08/12/180G 1776022001 50
13 SL-SMT 5.08/13/180G 1776242001 50
14 SL-SMT 5.08/14/180G 1776252001 50
15 SL-SMT 5.08/15/180G 1776262001 50
16 SL-SMT 5.08/16/180G 1776272001 50
17 SL-SMT 5.08/17/180G 1776282001 20
18 SL-SMT 5.08/18/180G 1776292001 20
19 SL-SMT 5.08/19/180G 1776302001 20
20 SL-SMT 5.08/20/180G 1776312001 20
21 SL-SMT 5.08/21/180G 1776322001 20
22 SL-SMT 5.08/22/180G 1776332001 20
23 SL-SMT 5.08/23/180G 1776342001 20
24 SL-SMT 5.08/24/180G 1776352001 20
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing –
Marking 196
Coding 198,199
Miscellaneous –
D = up to 8 poles Ø 1.4 +0.1
from 9 poles Ø 1.5 +0.1
15
xyzljsdöaklsdOmnimate Range - Pitch 5.08 mm
Pin headers SL-SMT 5.08/180LF
Technical Data VDE UL CSA Technical Data VDE UL CSATechnical Data VDE UL CSA
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Rated voltage V250* 300 300
Rated current A151010
*Overvoltage category III / Pollution severity 3
Additional technical data see page 2
Solder pin length 1.5 mm
Tape-on-Reel
Colour: Black
Tape width 56 mm
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180LF 1776364001 200
3SL-SMT 5.08/3/180LF 1776374001 200
4SL-SMT 5.08/4/180LF 1776384001 200
5SL-SMT 5.08/5/180LF 1776394001 200
6SL-SMT 5.08/6/180LF 1776404001 200
Additional pole numbers and tape widths on request.
Solder pin length 1.5 mm
Tray
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180LF 1776363001 66
3SL-SMT 5.08/3/180LF 1776373001 54
4SL-SMT 5.08/4/180LF 1776383001 48
5SL-SMT 5.08/5/180LF 1776393001 42
6SL-SMT 5.08/6/180LF 1776403001 36
7SL-SMT 5.08/7/180LF 1776413001 30
8SL-SMT 5.08/8/180LF 1776423001 30
9SL-SMT 5.08/9/180LF 1776433001 24
10 SL-SMT 5.08/10/180LF 1776443001 24
11 SL-SMT 5.08/11/180LF 1776453001 24
12 SL-SMT 5.08/12/180LF 1776463001 18
13 SL-SMT 5.08/13/180LF 1776473001 18
14 SL-SMT 5.08/14/180LF 1776483001 18
15 SL-SMT 5.08/15/180LF 1776493001 18
16 SL-SMT 5.08/16/180LF 1776503001 12
17 SL-SMT 5.08/17/180LF 1776513001 12
18 SL-SMT 5.08/18/180LF 1776523001 12
19 SL-SMT 5.08/19/180LF 1776533001 12
20 SL-SMT 5.08/20/180LF 1776543001 12
21 SL-SMT 5.08/21/180LF 1776553001 12
22 SL-SMT 5.08/22/180LF 1776573001 12
23 SL-SMT 5.08/23/180LF 1776583001 12
24 SL-SMT 5.08/24/180LF 1776593001 12
Solder pin length 1.5 mm
Standard Box
Colour: Black
Poles Type Cat. No. Qty.
2SL-SMT 5.08/2/180LF 1776362001 100
3SL-SMT 5.08/3/180LF 1776372001 100
4SL-SMT 5.08/4/180LF 1776382001 100
5SL-SMT 5.08/5/180LF 1776392001 50
6SL-SMT 5.08/6/180LF 1776402001 50
7SL-SMT 5.08/7/180LF 1776412001 50
8SL-SMT 5.08/8/180LF 1776422001 50
9SL-SMT 5.08/9/180LF 1776432001 50
10 SL-SMT 5.08/10/180LF 1776442001 50
11 SL-SMT 5.08/11/180LF 1776452001 50
12 SL-SMT 5.08/12/180LF 1776462001 50
13 SL-SMT 5.08/13/180LF 1776472001 50
14 SL-SMT 5.08/14/180LF 1776482001 50
15 SL-SMT 5.08/15/180LF 1776492001 50
16 SL-SMT 5.08/16/180LF 1776502001 50
17 SL-SMT 5.08/17/180LF 1776512001 20
18 SL-SMT 5.08/18/180LF 1776522001 20
19 SL-SMT 5.08/19/180LF 1776532001 20
20 SL-SMT 5.08/20/180LF 1776542001 20
21 SL-SMT 5.08/21/180LF 1776552001 20
22 SL-SMT 5.08/22/180LF 1776572001 20
23 SL-SMT 5.08/23/180LF 1776582001 20
24 SL-SMT 5.08/24/180LF 1776592001 20
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous –
Accessories see catalogue “PCB-Components” Page
Fixing integrated in product
Marking 196
Coding 198,199
Miscellaneous –
Ø
16 Subject to technical alterations and amendments without notice · Printed in Germany · 5627440000 · 02/2002 · PSLK
Design Recommendation
Application notes
To garantuee the best soldering result in the reflow processes the required paste
volume and paste filling level must be optimized for the paste printing process.
We recommend a calculation of paste volume as follows:
Solder paste volume:
Recommended for optimized solder fill, solder joint shape and tolerances according
to IPC-A610B.
Valid for all types of SL-SMT with following parameters:
Pin headers:
Pin length = L[mm] = 1.5-0.3
Stand-off heigth = hL[mm] = min. 0.3
Pin diameter = d[mm] = 1.2
Printed circuit board (PCB):
Board thickness = H[mm] = 1.6
Type of hole = plated through hole
Inside diameter finished hole = dI[mm] = see table *1)
Outside diameter solder eyelet = dA[mm] = 2.3
Tolerances according to IEC 326-3 = very fine
Template:
Template thickness = DS[ µm] = 120 – 180
Template aperture diameter = dS[mm] = 2.1 *2)
Solder paste:
Solder paste grain [µm] = 20 - 40 = type 3
Evaporation volume of the solder paste [%] = approx. 50
Process:
Paste applying process = single template print
Paste filling level of the finished hole = fP[%] = see table
Assembly processing = automatic Pick-and-Place
Temperature profile = standard,
according to EN 61760-1
*1) Tolerances of component, PCB and placement machine must be observed:
recommended diameter for 9 to 24 poles and types with solder flange LF: dI= 1.5+0.1 mm
*2) Template aperture diameter about 10% smaller then Outside diameter of solder eyelet dA
Additional information and application notes can be given on request, or found on our website:
www.weidmueller.com
pin header type: open, closed
ended: solder flange LF:
minimal solder joint shape
optimal solder joint shape
Poles 2 up to 8
–
recommended inside diameter
finished hole *1) :
dI= 1.4+0,1 mm
Poles 9 up to 24
Poles 2 up to 24
dI= 1.5+0,1 mm
2.4 mm3/ 70 %
2.9 mm3/ 90 %
3.1 mm3/ 85 %
3.5 mm3/ 100 %
paste volume VP[mm3] / filling level fp[%]
after print
pin header parameter
pin cross-section
PCB parameter
template parameter
optimal solder joint shape
