dataT2000.qk 3/8/01 17:29 Page 2 PID Controllers Temperature Controls T2000 * * * * * * * * * * * * T2000 1/16 DIN and 1/32 DIN NEMA 4X protection Autotune automatically sets PID parameters Single ramp/soak program Heat-cool operation AC or DC power supply Inputs: Thermocouple, RTD, 0-50mV Two outputs: SSR voltage pulse/relay Five alarm modes RS232 or RS485 (retrofittable) MODBUS RTU protocol Three year warranty Product Description Ordering Key Microprocessor based controller for temperature measurements in C or F. Easy to view single or dual 4 digit display readout. Constructed in a rugged NEMA4X waterproof housing in the popular 1/32 or 1/16 DIN size. 100-240VAC or 12-24VDC supply voltage. Universal inputs and various combinations of output types are also standard features. Model Size Display Outputs Communication Power Supply T20 16 1 SR 2 A Type Selection Model Size Display Outputs Communication Power Supply T20 16: 1/16 DIN 32: 1/32 DIN 1: SR: 5VDC Pulse and 1A Relay Outputs RR: 2A and 1A Relay Output SS: Two 5VDC Pulse Outputs X: None 2: RS232 4: RS485 A: 100-240VAC B: 12-24VAC/DC (Only single display units with SR and SS outputs) 2: Single Display Dual Display (1/16 DIN only) General Specifications Input Specifications Power supply Thermocouple (cont'd) S T Standards CJC rejection External resistance (RTD) Pt100/RTD-2 (2 wire) Standards Display Upper display reading Lower display (T20162) Output indicators Keypad Approvals 100-240VAC +/- 10%, 50-60Hz 12-24VAC/DC +/- 20%, 50-60Hz 4 digit high brightness green LED 10mm high 4 digit high brightness red LED 9mm high LED output indicators - flashing SP1 square green LED output indicators - SP2 round red 3 full travel elastomeric pushbuttons UL, CE Input Specifications Thermocouple B E J K L N R 32 to 3275F (0 to 1800C) 32 to 1112F (0 to 600C) 32 to 1472F (0 to 800C) -58 to 2192F (-50 to 1200C) 32 to 1472F (0 to 800C) -58 to 2192F (-50 to 1200C) 32 to 2912F (0 to 1600C) Specifications are subject to change without notice Bulb current Linear process input mV Specifications for Both Thermocouples and RTDs Calibration accuracy Sampling frequency Common mode rejection Series mode rejection Temperature coefficient Reference conditions (cont'd) 32 to 2912F (0 to 1600C) -273 to 482F (-200 to 250C) IPTS/68/DIN 43710 20:1 (0.05%C) typical 100W maximum -273 to 752F (-200 to 400C) DIN 43760 (100W 0C/138.5W 100C Pt) 0.2 mA maximum 0 to 50 mV (0 to 20 mV, 4 to 20 mV) +/- 0.25% maximum +/- 1C Input 10Hz, CJC 2 sec. Negligible effect up to 140db, 240V, 50-60Hz 60db, 50-60Hz 150ppm/(C maximum) 22C +/- 2C, rated voltage after 15 minutes settling time 1 dataT2000.qk 3/8/01 17:29 Page 3 T2000 Output Devices (maximum of two outputs) SSd (solid state relay driver) 5 VDC +/- 15%, 15ma, non-isolated Relay Form A SPST, 2A/250VAC resistive load Second Relay Form A SPST, 1A/250VAC resistive load Housing Specifications Environmental Safety Text Humidity Altitude Installations Pollution Protection EMC emission EMC immunity Ambient Moldings UL873, EN61010, CSA 22.2 No. 1010.1-92 Maximum 80% Up to 2000m Categories II and III Degree II NEMA 4X (IP66) EN50081-1, FCC Rules 15 subpart J Class A EN50082-2 32 to 122F (0 to 50C) Flame retardant polycarbonate Housing Specifications Instrument body Model T2016 Model T2032 Overall length Weight T20161 T20162 T2032 Dimensions (front fascia) Model T2016 Model T2032 Sleeve length Dimensions (cont'd) 1.76 x 1.76" (44.8 x 44.8mm) 1.76 x 0.87" (44.8 x 22.0mm) 4.57" (116mm) 4.2 ounces 4.6 ounces 3.9 ounces 2.0 x 2.0" (51 x 51mm) includes gasket 2.0 x 1.12" (51 x 28.5mm) includes gasket 4.2" (106.7mm) includes gasket Wiring Diagram T2016 Series T2016 Series (T20162 shown) 1.76" (44.8mm) 2.0" (51.0mm) includes gasket Comms option (when fitted) 1.76" (44.8mm) 9 10 11 12 13 14 15 16 + - + - 5Vdc 15mA 1 2.0" (51.0mm) includes gasket 4.57" (116.2mm) 4.2" (106.7mm) with gasket fitted 2 3 Sensor Output SP1 Sensor S1 + - SSR Line 6 Output SP2 L 7 N 8 Supply Open in alarm state Load F1 T2032 Series T2032 Series 1.76" (44.8mm) .87" (22.0mm) 1.12" (28.5mm) includes gasket Comms option (when fitted) 4.57" (116.2mm) 4.2" (106.7mm) with gasket fitted 9 10 + 12 13 14 15 16 L N 5 6 7 8 5Vdc 15mA 1 2 Sensor S1 Line 11 - + - Sensor Neutral Specifications are subject to change without notice 5 F2 Neutral 2.0" (51.0mm) includes gasket 4 3 4 Output SP1 + - SSR Output SP2 Open in alarm state Supply Load F2 F1 2