BFC2 808 ..... Vishay BCcomponents O 10 mm Film Dielectric Trimmers TEST VOLTAGE (DC) FOR 1 MINUTE: FEATURES 300 V * Housing diameter 10 mm * For a basic grid of 2.54 mm (0.1") or 2.50 mm MAXIMUM CONTACT RESISTANCE: * Top and bottom or top adjustment 10 m * Vertical and horizontal versions e3 RoHS * Round head MINIMUM INSULATION RESISTANCE: 10 000 M Pb-free COMPLIANT APPLICATIONS * For consumer and industrial equipment CATEGORY TEMPERATURE RANGE: DESCRIPTION: PP The vanes of the trimmer are stacked on a sturdy plastic base. The color of the base indicates the maximum capacitance (see Electrical Data Table). The dielectric is a film of polypropylene (PP), polycarbonate (PC) or polytetrafluorethylene (PTFE), which supports the vanes in such a way that good stability is ensured and no microphony can occur. - 40 to + 70 C PC, PTFE - 40 to + 85 C CLIMATIC CATEGORY (IEC 60068): Flux absorption between the vanes is prevented. PP Cleaning with solvents is not advised. 40/070/21 Versions are available with either a vertical spindle, or a horizontal spindle. Both versions have top adjustment by means of a screwdriver or trimming key and bottom adjustment by means of a key. PC, PTFE 40/085/21 MINIMUM STORAGE TEMPERATURE: QUALITY LEVEL: - 55 C Sampling and data evaluation for quality level in accordance with "MIL-STD-105D" and "IEC 60410": RELATED SPECIFICATION: < 0.15 % major defects IEC 60418-1 and 4 < 0.65 % minor defects EFFECTIVE ANGLE OF ROTATION: 180 (rotation in 180 only, see "Life of Trimmer") Each capacitor is tested for minimum Cmax and is also subjected to the full test voltage. Cmin/Cmax: 2.5/15 to 7/105 pF OPERATING TORQUE: 2 to 25 mNm RATED VOLTAGE (DC): 150 V MAXIMUM AXIAL THRUST: 2N www.vishay.com 320 LIFE OF TRIMMER: Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) For technical questions, contact: dc-film@vishay.com Document Number 28528 Revision 11-Oct-07 BFC2 808 ..... Vishay BCcomponents O 10 mm Film Dielectric Trimmers ROUND HEAD ROUND HEAD 2.5 2.5 0.6 0.6 0.7 0.7 11 max. 11 max. Z Z 4 0.5 4 0.5 3 0.2 3 0.2 10.6 5 max. 0.1 10 0 - 0.2 10.6 5 max. 0.1 10 0 - 0.2 0.4 max. 5.85 0.2 5.85 0.2 1.6 1.6 DETAIL Z turned 90 DETAIL Z turned 90 0.85 max. 0.65 0.2 0.5 0.15 0.6 0.1 0.5 0.15 0.6 0.1 Trimmers BFC2 808 ..... series, vertical version Dimensions in millimeters 5 10 R 5 R R 2.5 R 7.5 1.3 5 S S R = rotor, S = stator 1.3 The large hole is for bottom adjustment and the diameter is determined by user's requirements. R = rotor, S = stator Hole pattern Document Number 28528 Revision 11-Oct-07 Hole pattern For technical questions, contact: dc-film@vishay.com www.vishay.com 321 BFC2 808 ..... Vishay BCcomponents O 10 mm Film Dielectric Trimmers 10 ROUND HEAD 5 2.5 0.6 R 0.7 R 1.3 5 11 max. S R = rotor, S = stator 4.8 0.2 110 5 Hole pattern Z 3 0.2 3.1 0.3 6.5 0.1 4 0.5 ADJUSTMENT For top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown below 0 10 - 0.2 5 0.1 3 1.6 + 0.1 0 + 0.1 0.7 0 1.7 + 0.2 0.6 0 DETAIL Z turned 90 2 min. 0.85 max. 0.5 0.15 0.6 0.1 Bottom adjustment key Trimmers BFC2 808 ..... series, horizontal version Dimensions in millimeters ORDERING INFORMATION CATALOG NUMBER BFC2 808 ..... HORIZONTAL VERSION Cmin /Cmax (pF) VERTICAL VERSION HOLE PATTERN 5 mm x 10 mm HOLE PATTERN 5 mm x 10 mm ROUND HEAD ROUND HEAD TOP AND BOTTOM ADJUSTMENT HOLE PATTERN 7.5 mm x 5 mm ROUND HEAD TOP AND BOTTOM ADJUSTMENT ROUND HEAD TOP ADJUSTMENT 2.5/15 61159 31159 32159 - 3/22.5 61229 31229 32229 - 5.5/40 61409 31409 32409 - 5.5/50 - 01029 01006 - 5.5/65 61659 31659 32659 01001 6/80 61809 31809 32809 - 7/105 61101 31101 32101 - 6/120 - 31121 - - www.vishay.com 322 For technical questions, contact: dc-film@vishay.com Document Number 28528 Revision 11-Oct-07 BFC2 808 ..... O 10 mm Film Dielectric Trimmers Vishay BCcomponents MOUNTING PACKAGING The trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. Bulk packaged in cardboard boxes lined with expanded plastic. For smallest packaging quantities (SPQ) see Electrical Data Table. ELECTRICAL DATA GUARANTEED MAX. Cmin / SHAPE SPINDLE OF FIG. MIN. Cmax HEAD AT 200 kHz (pF) 1 vertical 2.5/15 round 2 horizontal 3 1 vertical 3/22.5 round 2 horizontal 3 1 vertical 5.5/40 round 2 horizontal 3 1 5.5/50 vertical round 2 round 2 vertical round 1 5.5/65 round 2 horizontal round 3 round 1 vertical round 2 6/80 horizontal round 3 round 1 vertical round 2 7/105 horizontal round 3 6/120 vertical round 2 TAN AT Cmax x 10-4 TEMP. COEFF. (10-6/K) MIN. fres COL. SPQ AT Cmax OF (MHz) BASE ADJ. MODE DIEL. top + bottom PP 10 25 - 200 700 420 blue top + bottom PP 10 25 - 200 700 200 green top + bottom PP 10 25 - 200 400 200 grey 10 25 - 200 400 170 yellow PP 10 25 - 200 500 170 yellow top + bottom PC 70 - - 50 400 170 red top + bottom PC 70 - - 50 400 170 violet top + bottom PC 70 - - 50 400 170 violet 1 MHz 100 MHz top + bottom PTFE top top + bottom 800 800 700 800 800 700 800 800 700 800 800 800 800 800 700 800 800 700 800 800 700 800 CATALOG NUMBER BFC2 ... ..... .... 808 31159 .... 808 32159 .... 808 61159 .... 808 31229 .... 808 32229 .... 808 61229 .... 808 31409 .... 808 32409 .... 808 61409 .... 808 01029 .... 808 01006 .... 808 01001 .... 808 31659 .... 808 32659 .... 808 61659 .... 808 31809 .... 808 32809 .... 808 61809 .... 808 31101 .... 808 32101 .... 808 61101 .... 808 31121 * ordering code for SAP system TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 method of mounting method A 14 capacitance drift after TC measurement 19 thrust axial thrust of 2 N C/C: 0.3 % 21 robustness of terminations: no damage C/C: 4.5 % for Cmax < 40 pF; C/C: 2.5 % for Cmax 40 pF 21.1 Ua tensile 1N 21.2 Ub bending 1 cycle no damage 22 Na 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature C/C: 1.5 % 23 T solder bath immersion 3 mm; 235 C; 2 s good wetting no mechanical damage solder bath: 260 C; 10 s no mechanical damage 4000 10 bumps; 40 g; 6 ms C/C: 0.4 %; no mechanical damage Ta Tb 24 Eb Document Number 28528 Revision 11-Oct-07 rapid change of temperature soldering: solderability resistance to heat impact bump For technical questions, contact: dc-film@vishay.com www.vishay.com 323 BFC2 808 ..... Vishay BCcomponents IEC 60418-1 CLAUSE IEC 60068 TEST METHOD 25 Fc 26 O 10 mm Film Dielectric Trimmers TEST vibration PROCEDURE frequency 10 to 55 Hz; amplitude 0.35 mm; 1.5 hours REQUIREMENTS C/C: 0.8 %; no mechanical damage C/C: 3 % for Cmax < 80 pF; climatic sequence: C/C: 6 % for Cmax 80 pF 26.1 B dry heat 16 hours at upper category temperature tan : 15 x 10-4 for Cmax < 80 pF; tan : 80 x 10-4 for Cmax 80 pF Rins: 10 000 M; rotor contact R: 10 26.2 D damp heat accelerated, first cycle 1 cycle; 24 hours; + 40 C; 95 to 100 % RH voltage proof: 300 V for 1 minute 26.3 Aa cold 16 hours; - 40 C visual examination: no mechanical damage damp heat accelerated, remaining cycles 1 cycle; 24 hours; + 40 C; 95 to 100 % RH operating torque: 2 to 35 mNm 21 days; + 40 C; 90 to 95 % RH C/C: 3 % for Cmax < 100 pF; 3 % for Cmax 100 pF 26.5 27 Ca damp heat steady state tan : 20 x 10-4 for Cmax < 80 pF; tan : 80 x 10-4 for Cmax 80 pF Rins: 10 000 M; rotor contact R: 10 m voltage proof: 300 V for 1 minute visual examination: no mechanical damage operating torque: 2 to 35 mNm 29 mechanical endurance 10 cycles Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) C/C: 1 % C/C after axial thrust: 0.4 %; rotor contact R: 10 m voltage proof: 300 V for 1 minute visual examination: no mechanical damage operating torque: 1.5 to 37 mNm www.vishay.com 324 For technical questions, contact: dc-film@vishay.com Document Number 28528 Revision 11-Oct-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BFC280832659 BFC280861229 BFC280801006 BFC280831659 BFC280832809 BFC280861809 BFC280831409 BFC280831809 BFC280831101 BFC280861409 BFC280832409