SA5511 / SA5511(B) Semiconductor LED Lamp Features * Red Colored diffusion lens type * 5mm(T-13/4) all plastic mold type * High reliability and low power consumption Outline Dimensions unit : STRAIGHT TYPE mm STOPPER TYPE 5.00.2 5.00.2 8.60.2 8.60.2 0.80.2 0.80.2 0.5 0.5 23.0 MIN 23.0 MIN 1.0MIN 1.0MIN 2.54NOM 1 2 2.54NOM 5.80.2 1 2 5.80.2 PIN Connections 1.Anode 2.Cathode KLA-0011-000 1 SA5511 / SA5511(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 30 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -2585 Storage Temperature Tstg -30100 1 * Peak Forward Current 2 260 for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Symbol Test Condition Min Typ Max Unit Forward Voltage VF IF= 20mA - 2.0 2.7 V Luminous Intensity IV IF= 20mA - 80 - mcd P IR IF= 20mA - 630 - nm IF= 20mA - 35 - nm VR=4V - - 10 uA IF= 20mA - 20 - deg Peak Wavelength Spectrum Bandwidth Reverse Current 3 * Half Angle 1/2 *3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity KLA-0011-000 2 SA5511 / SA5511(B) Characteristic Diagrams Fig. 1 IF - VF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 2 IV - IF Forward Voltage VF [V] Forward Fig. 3 IF - Ta Current IF [mA] Forward Relative Intensity [%] Current IF [mA] Fig.4 Spectrum Distribution Ambient Temperature Ta [] Wavelength [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KLA-0011-000 3