ZB5AG614 Product data sheet Characteristics selector switch head O22 2-position spring return Ronis 520E Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications has not been replaced. Please contact your customer care center for more information. Main Range of product Harmony XB5 Product or component type Head for key selector switch Device short name ZB5 Bezel material Dark grey plastic Mounting diameter 22mm Head type Standard Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator Right to left spring return Operator profile Black key switch Operator position information 2 positions 90 Type of keylock Ronis 520E Key withdrawal position Left Complementary CAD overall width 29mm CAD overall height 29mm CAD overall depth 72mm Net weight 0.061kg Mechanical durability 1000000cycles Station name XALD 1...5 cut-outs XALK 2...5 cut-outs Electrical composition code C4 for <6 contacts using single and double blocks in front mounting C5 for <5 contacts using single blocks in front mounting C6 for <5 contacts using single and double blocks in front mounting C7 for <4 contacts using single blocks in front mounting C8 for <4 contacts using single and double blocks in front mounting C11 for <3 contacts using single blocks in front mounting C3 for <6 contacts using single blocks in front mounting SF1 for <3 contacts using single blocks in front mounting Dec 15, 2019 1 SR1 for <3 contacts using single blocks in rear mounting C15 for <1 contacts using single blocks in front mounting Device presentation Basic element Environment Protective treatment TH Ambient air temperature for storage -40...70C Ambient air temperature for operation -40...70C Overvoltage category Class II conforming to IEC 60536 IP degree of protection IP66 conforming to IEC 60529 IP67 IP69 IP69K NEMA degree of protection NEMA 13 NEMA 4X Resistance to high pressure washer 7000000Pa at 55C, distance : 0.1 m IK degree of protection IK06 conforming to IEC 50102 Standards UL 508 EN/IEC 60947-1 EN/IEC 60947-5-1 JIS C8201-5-1 CSA C22.2 No 14 EN/IEC 60947-5-4 JIS C8201-1 Product certifications DNV BV CSA RINA LROS (Lloyds register of shipping) UL listed GL Vibration resistance 5 gn (f= 2...500Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27 Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information Contractual warranty Warranty 2 18 months Product data sheet Dimensions Drawings ZB5AG614 Dimensions 3 Product data sheet Mounting and Clearance ZB5AG614 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) Diameter on finished panel or support For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 O22.5mm recommended (O22.3 0 ) / O0.89in. recommended (O0.88in. 0 ) Connections a in mm a in in. b in mm b in in. By screw clamp terminals or plug-in connector 40 1.57 30 1.18 By Faston connectors 45 1.77 32 1.26 On printed circuit board 30 1.18 30 1.18 Detail of Lug Recess (1) (2) (3) Diameter on finished panel or support For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 O22.5mm recommended (O22.3 0 ) / O0.89in. recommended (O0.88in. 0 ) 4 Product data sheet Mounting and Clearance ZB5AG614 Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30mm min. / 1.18in. min. 40mm min. / 1.57in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30mm min. 40mm min. 5 Dimensions in in. A: B: 1.18in. min. 1.57in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3mm / 0.012in.: T1 + T2 = 0.3mm max. Installation Precautions Minimum thickness of circuit board: 1.6mm / 0.06in. Cut-out diameter: 22.4mm 0.1 / 0.88in. 0.004 Orientation of body/fixing collar ZB5AZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max. Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws: every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y). with each selector switch head (ZB5AD*, ZB5AJ*, ZB5AG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) (2) (2) (4) Head ZB5AD* Panel Nut Printed circuit board 6 Mounting of Adapter (Socket) ZBZ01* 1 2 elongated holes for ZBZ006 screw access 2 1 hole O 2.4mm 0.05 / 0.09in. 0.002 for centring adapter ZBZ01* 3 8 x O 1.2mm / 0.05in. holes 4 1 hole O 2.9mm 0.05 / 0.11in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4mm / 0.09in. for clipping in adapter ZBZ01* Dimensions An + 18.1 relate to the O 2.4mm 0.05 / 0.09in. 0.002 holes for centring adapter ZBZ01*. 7 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Code C4 8 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Code C5 9 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Code C6 10 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Code C7 11 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Code C8 12 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Code C3 13 Product data sheet Technical Description ZB5AG614 Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 14 Product data sheet Technical Description ZB5AG614 Legend Single contact Double contact Light block Possible location 15 Product data sheet Technical Description ZB5AG614 Sequence of Contacts Fitted to 2-position Selector Switch Body Position 315 Push Position Top Bottom Contacts Location Left Centre Right State 0 0 0 N/O open open open N/C closed closed closed Location Left Centre Right State 1 1 1 N/O closed closed closed N/C open open open Position 45 Push Position Top Bottom Contacts 16