KB-A100SURKW - Kingbright Corporation

SPEC NO: DSAK2963 REV NO: V.5A DATE: MAY/16/2013 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1334000699

8.89mmx3.81mm LED LIGHT BAR

Part Number: KB-A100SURKW Hyper Red

Features

zUniform light emitting area.

zLow current operation.

zEasily mounted on P.C. boards.

zFlush mountable.

zCan be used with panels and legend mounts.

zRoHS compliant.

Description

The Hyper Red source color devices are made with Al-

GaInP on GaAs substrate Light Emitting Diode.

Package Dimensions& Intern al Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

SPEC NO: DSAK2963 REV NO: V.5A DATE: MAY/16/2013 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1334000699

Selection Guide

Note:

1. Luminous intensity/ luminous Flux: +/-15%.

* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25° C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

3. Wavelength value is traceable to the CIE127-2007 compliant national standards.

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 2mm below package base.

Part No. Dice Lens Type Iv (mcd) [1]

@ 20mA

Min. Typ.

Hyper Red (AlGaInP) White Diffused

120 230

*40 *75

KB-A100SURKW

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Hyper Red 645 nm IF=20mA

λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA

Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA

C Capacitance Hyper Red 35 pF VF=0V;f=1MHz

VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA

IR Reverse Current Hyper Red 10 uA VR=5V

Parameter Hyper Red Units

Power dissipation 75 mW

DC Forward Current 30 mA

Peak Forward Current [1] 185 mA

Reverse Voltage 5 V

Operating / Storage Temperature -40°C To +85°C

Lead Solder Temperature[2] 260°C For 3-5 Seconds

SPEC NO: DSAK2963 REV NO: V.5A DATE: MAY/16/2013 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1334000699

Hyper Red KB-A100SURKW

SPEC NO: DSAK2963 REV NO: V.5A DATE: MAY/16/2013 PAGE: 4 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1334000699

PACKING & LABEL SPECIFICATIONS KB-A100SURKW

SPEC NO: DSAK2963 REV NO: V.5A DATE: MAY/16/2013 PAGE: 5 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1334000699

SPEC NO: DSAK2963 REV NO: V.5A DATE: MAY/16/2013 PAGE: 6 OF 6

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1334000699

Detailed application notes are listed on our website.

http://www.kingbright.com/application_notes