8 7 6 5 4 3 2 { THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION -,- Loc DIST REVISIONS COPYRIGHT BY TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. CM OO P LTR DESCRIPTION DATE DWN APVD E EC 0G3B 0789 04 2uayos |BSVIDPB E1 | REVISED PER ECO09-023313 130CT09 | KK |AEG /\ MATERIAL _ HOUSING: THERMOPLASTIC POLYESTER,GLASS FILLED,UL94VO. POST: COPPER ALLOY |__} [dX FINISH 7 7 HOUSING: NATURAL na POST: BRIGHT TIN-LEAD (93/7) PLATE,0.003800.00880[.000150 an a 000350] THK OVER NICKEL UNDERPLATE,O.00130[.000050] MIN THK. AN UL MARKING MAY NOT APPEAR ON THE 2 OR 3 POSITION SIZES. CSA MARKING MAY NOT APPEAR ON THE 2 POSITION SIZE. D /\ POST SOLDERTAILS COMPLY WITH AMP SOLDERABILITY SPEC 10911-2. D 1.98 -+*- 1.078] REF LX POST WITHSTANDS 13.34N [3 LB] MIN AXIAL FORCE IN EITHER DIRECTION WITHOUT DISLODGING. ii\ [i\ Jr APPLIES AT LN APPLIES WHEN THE HEADER IS STRAIGHT. ]0.13/25.4[.005/1.000] LX PLASTIC PROJECTIONS PERMITTED IN THIS ZONE. 3 1840.25 /\ COORDINATE DIMENSIONS APPLIES FROM THE CENTER [.125+ 010] OF THE ACTUAL FEATURE. 1254. a Ad SOLDER SIDE OF BOARD IS SHOWN. 11. DIMENSIONS IN BRACKETS ARE IN. INCHES. 7 Dd ALL POSITION SIZES HAVE THE BACKWALL NOTCHED ON BOTH ENDS AS SHOWN. THE 2 THRU 5 POSITION SIZES HAVE SOLID BACKWALLS. POSITION SIZES 6 AND ABOVE HAVE AN INTERRUPTED BACKWALL AT VARIOUS LOCATIONS (SEE TABLE FOR INTERRUPTION(S) LOCATIONS). Ad EDGE OF POLARIZING LOCK WALL TO BE IN LINE WITH CENTERLINE OF ADJACENT POST WITHIN 0.13 [.005] 0.89 REF AN FINISH [.035] HOUSING: NATURAL C POST: MATTE TIN PLATE 0.000150 MIN THICK OVER NICKEL, C INTERRUPTED WALL FOR POSITION SIZES D> OBSOLETE PARTS: OBSOLETE CIS STREAMLINING PER D.RENAUD/D.SINISI 6 AND ABOVE 10.25[.010] Ad ALL POSTS 3.96 1.14+0.03 5.33 7 [156] _ [.045+.001] SQUARE REF [.210] REF - 1 g5t0.13 1.93+0.08 ]0.25[.010] @IA TYP O9_0.95 | [.076+.003] = TYP TYP = | .073- 895 | ~ pe 2 PLC 4&5, 7&8, 11&12, 14&15 71.20 [2.803] 18 46446148 /eA\/\ \ \ Ad 4&5, 7&8, 10&11, 13&14 67.23 [2.647] 17 46446147 t 4&5, 8&9, 12&13 63.27 [2.491] 16 4_6446146 4&5, 8&9, 11&12 59.31 [2.335] 15 A6446145 MATING END POST #1 4&5 7&8, 108&11 55.35 [2.179] 14 46446144 oN aa 11.43 A&5 7&8, 10&11 51.38 [2.023] 13 A6446143 DS [.450] REF 13.8440.95 4&5, 8&9 47.42 [1.867] 12 46446142 \ [.545+.010] 485, 7&8 43.46 [1.711] 14 46446141 3.18 384, 7&8 39.50 [1.555] 10 4644614-0 [.125] 384, 6&7 35.53 [1.399] Q 3644613-9 = |0.13/25.4[.005/1.000] \ 485 31.57 [1.243] 8 56446158 g 485 27.61 [1.087] 7 36446137 ! i eo Te 1 ] J 3&4 23.65 [.931] 6 3644613-6 B A { NONE 19.69 [|.775] 5 36446135 B y |_NONE 15.72 [.619] 4 36446134 i SOLDERTAIL NONE 11.76 [.463] 3 3644613-3 ! AI4\ | NONE 7.80 [.307] 2 3644613-2 J L\ 4&5, 7&8, 11&12, 14&15 71.20 [2.803] 18 46446438 306 /\ 9.21 / 4&5, 7&8, 10&11, 13&14 67.23 [2.647] 17 +-644643-F P68) tt [200] - _|_ 10.80 AS, | | 4&5, 8&9, 12&13 63.27 [2.497] 16 16446436 ~ - [.425]| SUPERSEDED 4&5, 889, 11&12 59.31 [2.335] 15 16446435 f-~ OF P.C.BOARD 4&5 7&8, 10&11 55.35 [2.179] 14 46446434 4&5 7&8, 10811 51.38 [2.023] 13 41 64AAG433 4&5, 889 47.42 [1.867] 12 1644613-2 SUPERSEDED 4&5, 7&8 43.46 [1.711] 114 4+ SAAB 434 01.70+0.05 3&4, 7&8 39.50 [1.555] 10 16446130 [%.0674.002] TYP SUPERSEDED 384, 6&7 35.53 [1.399] 9 6446439 +) @]0.10[.004] @ 4&5 31.57 [1.243] 8 6446138 SUPERSEDED 4&5 27.61 [1.087] 7 6446137 3&4 23.65 [.931] 6 644613-6 NONE 19.69 [.775] 5 6446135 ' NONE 15.72 [.619] A 6446134 NONE 11.76 [.463] 3 6446133 Z2\ | NONE 7.80 [.307] 2 6446132 RECOMMENDED MOUNTING HOLE PATTERN A FOR 1.57[.062] THICK P.C. BOARD FINISH BACKWALL INTERRUPTION(S) L SITION: PART NO A od BETWEEN POST POSITIONS THIS DRAWING IS A CONTROLLED DOCUMENT. | gun, 2-12-95 Zz, Tyco Electronics Corporation CHK 2-12-95 Electronics Harrisburg, Pa 17105-3608 TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm [INCHES] O PLC 1 PLC Cc] 2 PLC 3 PLC 4 PLC ANGLES + 0.13[.005] He HEHE HE EE R.SWING APVD D.CLARK 15-12-93 | NAME PRODUCT SPEC APPLICATION SPEC MTA156 HEADER ASSEMBLY, POLARIZED LOCK, RIGHT ANGLE FRONT BEND,.045 SQUARE POST, TIN-LEAD PLATED, WITHOUT RETENTION PEGS MATERIAL ; FINISH WEIGHT Al 00779 SIZE CAGE CODE | DRAWING NO G=-644613 RESTRICTED TO CUSTOMER DRAWING SHEET OF REV 1 E 1 AMP 4805 REV 31MAR2000